Monitoring of Bridges by a Laser Pointer: Dynamic Measurement of Support Rotations and Elastic Line Displacements: Methodology and First Test.

Deck inclination and vertical displacements are among the most important technical parameters to evaluate the health status of a bridge and to verify its bearing capacity. Several methods, both conventional and innovative, are used for structural rotations and displacement monitoring; however, none of these allow, at the same time, precision, automation, static and dynamic monitoring without using high cost instrumentation. The proposed system uses a common laser pointer and image processing. The elastic line inclination is measured by analyzing the single frames of an HD video of the laser beam imprint projected on a flat target. For the image processing, a code was developed in Matlab® that provides instantaneous rotation and displacement of a bridge, charged by a mobile load. An important feature is the synchronization of the load positioning, obtained by a GNSS receiver or by a video. After the calibration procedures, a test was carried out during the movements of a heavy truck maneuvering on a bridge. Data acquisition synchronization allowed us to relate the position of the truck on the deck to inclination and displacements. The inclination of the elastic line at the support was obtained with a precision of 0.01 mrad. The results demonstrate the suitability of the method for dynamic load tests, and the control and monitoring of bridges.

A photogrammetric technique for the analysis of palatal three-dimensional changes during rapid maxillary expansion.

The aim of this study was to assess, by a digital photogrammetric technique, the relative dimensional changes before and after rapid maxillary expansion (RME). The transverse diameters and volumetric variations of the palate were measured by photogrammetry on study casts taken at three different phases of therapy: at the beginning of treatment (T1), on removal of the rapid expander, after expansion and retention for three months (T2), and six months after appliance removal (T3). The sample consisted of 30 children, (age range 7-8 years), all with a crossbite; 15 were angle Class I, six Class II and nine Class III. They were treated with an acrylic splint expander with two turns per day until the maxillary molar palatal cusps were in contact with the mandibular molar buccal cusps. The RME device was used as a passive retainer for three months, after which it was removed. During the following six months, no retention was used and no orthodontic treatment was undertaken. The findings demonstrated a significant relapse (P < 0.001) in the dental transverse diameter in all patients six months after appliance removal, although the palatal volume remained stable.