Neochloris oleoabundans cell wall rupture through melittin peptide: a new approach to increase lipid recovery.

OBJECTIVES: Microalgae cell wall affects the recovery of lipids, representing one of the main difficulties in the development of biofuel production. This work aimed to test a new method based on melittin peptide to induce a cellular disruption in N. oleoabundans. RESULTS: Neochloris oleoabundans cells were grown at 32 °C in the presence of a high concentration of nitrate-phosphate, causing a cell disruption extent of 83.6%. Further, a two-fold increase in lipid recovery following melittin treatment and solvent extraction was observed. Additionally, it was possible to verify the effects of melittin, both before and after treatment on the morphology of the cells. Scanning electron microscopy (SEM) and confocal images of the melittin-treated microalgae revealed extensive cell damage with degradation of the cell wall and release of intracellular material. CONCLUSIONS: Melittin produced a selective cell wall rupture effect in N. oleoabundans under some culture conditions. These results represent the first report on the effect of melittin on lipid recovery from microalgae.

Sequential SEM-EDS, PLM, and MRS Microanalysis of Individual Atmospheric Particles: A Useful Tool for Assigning Emission Sources.

In this work, the particulate matter (PM) from three different monitoring stations in the Monterrey Metropolitan Area in Mexico were investigated for their compositional, morphological, and optical properties. The main aim of the research was to decipher the different sources of the particles. The methodology involved the ex situ sequential analysis of individual particles by three analytical techniques: scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), polarized light microscopy (PLM), and micro-Raman spectroscopy (MRS). The microanalysis was performed on samples of total suspended particles. Different morphologies were observed for particles rich in the same element, including prismatic, spherical, spheroidal, and irregular morphologies. The sequential microanalysis by SEM-EDS/PLM/MRS revealed that Fe-rich particles with spherical and irregular morphologies were derived from anthopogenic sources, such as emissions from the metallurgical industry and the wear of automobile parts, respectively. In contrast, Fe-rich particles with prismatic morphologies were associated with natural sources. In relation to carbon (C), the methodology was able to distinguish between the C-rich particles that came from different anthopogenic sources-such as the burning of fossil fuels, biomass, or charcoal-and the metallurgical industry. The optical properties of the Si-rich particles depended, to a greater extent, on their chemical composition than on their morphology, which made it possible to quickly and accurately differentiate aluminosilicates from quartz. The methodology demonstrated in this study was useful for performing the speciation of the particles rich in different elements. This differentiation helped to assign their possible emission sources.

Environmental Levels, Sources, and Cancer Risk Assessment of PAHs Associated with PM2.5 and TSP in Monterrey Metropolitan Area.

In this work, the content of polycyclic aromatic hydrocarbons (PAHs) in total suspended particles and particulate matter with an aerodynamic diameter ≤ 2.5 µm (PM2.5) was analyzed using gas chromatography-mass spectrometry. In addition, a sequential chemical analysis of C-rich particles was performed through the parallel coupling of micro-Raman spectroscopy and scanning electron microscopy with X-ray scattering detection. Samples were collected at four sites in the Monterrey metropolitan area, Mexico. A total of 13 PAHs were quantified; indeno(1,2,3-cd)pyrene, chrysene, and benzo(a)anthracene were the most abundant. The total PAH concentrations at the four sampling sites ranged from 1.34 to 8.76 µg/m3. The diagnostic relation of the PAHs indicates that these compounds were emitted by the burning of gasoline and diesel and by the burning of charcoal and biomass. The sequential analysis correlated the morphology and the elemental/molecular composition of the C-rich particles, associated with the PAHs, with their possible emission sources. The estimated lifetime excess cancer risk for inhalation was higher than that established by the World Health Organization, which clearly makes this a potential health risk for the population.

Seasonal variation and chemical composition of particulate matter: A study by XPS, ICP-AES and sequential microanalysis using Raman with SEM/EDS.

During the winter period (January-March 2016), the total suspended particles (TSP) and particulate matter smaller than 2.5µm (PM2.5) were characterized by the application of various analytical techniques in four zones of the Metropolitan Area of Monterrey in Mexico. To evaluate the seasonal variation of some elements in the particulate matter, the results of this study were compared with those obtained during the summer season (July-September 2015). The speciation of the C1s signal by X-ray photoelectron spectroscopy revealed the contribution of aromatic and aliphatic hydrocarbons as the main components in both seasons. Conversely, carboxylic groups associated with biogenic emissions were detected only in winter. The percentages of SO42- ions were lower in winter, possibly caused by the decrease in the solar radiation, and relative humidity recorded. The results of the ICP analysis revealed that Fe, Zn and Cu were the most abundant metals in both TSP and PM2.5 in the two seasons. There were significant seasonal variations for concentrations of As, Ni and Zn in the urban area and for Fe, As, Cd, Ni and Zn in the industrial zone. This was attributed to the greater burning of fuels as well as to an increase in vehicular traffic, the effect of thermal inversion and changes in some meteorological parameters. The results of the sequential microanalysis by Raman spectroscopy and SEM/EDS allowed observation of deposits of carbonaceous material on the particles and to perform the speciation of particles rich in Fe and Pb, which helped infer their possible emission sources.

Gene Expression during BTEX Biodegradation by a Microbial Consortium Acclimatized to Unleaded Gasoline and a Pseudomonas putida Strain (HM346961) Isolated from It.

Pseudomonas putida strain (HM346961) was isolated from a consortium of bacteria acclimatized to unleaded gasoline-contaminated water. The consortium can efficiently remove benzene, toluene, ethylbenzene and xylene (BTEX) isomers, and a similar capability was observed with the P. putida strain. Proteome of this strain showed certain similarities with that of other strains exposed to the hydrocarbon compounds. Furthermore, the toluene di-oxygenase (tod) gene was up-regulated in P. putida strain when exposed to toluene, ethylbenzene, xylene, and BTEX. In contrast, the tod gene of P. putida F1 (ATCC 700007) was up-regulated only in the presence of toluene and BTEX. Several differences in the nucleotide and protein sequences of these two tod genes were observed. This suggests that tod up-regulation in P. putida strain may partially explain their great capacity to remove aromatic compounds, relative to P. putida F1. Therefore, new tod and P. putida strain are promising for various environmental applications.

Contamination and chemical fractionation of heavy metals in street dust from the metropolitan area of Monterrey, Mexico.

The prevalence of heavy metal pollution and mobility of both Pb and Cd was investigated in street dust samples from the Metropolitan Area of Monterrey (MAM) in northern Mexico. Street dust samples from 30 selected sites were analysed for their content of Zn, Cd, Pb, Cr and Ni after digestion according to U.S. EPA Method 3051. Multivariate analysis including correlation coefficient analysis, Principal Component Analysis and Cluster Analysis was used to analyse the data and identify possible sources of these heavy metals. Compared with background values, elevated concentrations of Pb (300 mg kg(-1)), Cd (7.6 mg kg(-1)) and Cr (78 mg kg(-1)) were observed in street dust of MAM. Based on multivariate statistical approaches, the studied elements were classified in three main sources: (1) Cr, Ni and Zn mainly derived from industrial activities; (2) Cd originating from traffic-related activities; and (3) Pb associated with vehicular emissions. A sequential extraction procedure using the Tessier method was applied to evaluate the mobility of Pb and Cd in street dust. The majority of Pb was associated with the residual fraction followed by the carbonate fraction. The majority of Cd was associated with the residual fraction. These results indicated that the mobility was higher in Pb (26%) compared with Cd (11%), posing a potential risk to the environment.

Transport of coliphage PRD1 in a surface flow constructed wetland.

A tracer study was conducted in a 3-ha surface flow constructed wetland to analyze transport performance of PRD1, an enteric virus model. The convection-dispersion equation (CDE), including a first-order reaction model, adequately simulated transport performance of PRD1 in the wetland under an average hydraulic loading rate of 82 mm/d. Convective velocity (v) and longitudinal dispersion coefficient (D) were estimated by modeling a conservative tracer (bromide) pulse through the wetland. Both PRD1 and bromide were simultaneously added to the entering secondary treated wastewater effluent. The mass of bromide and PRD1 recovered was 76 and 16%, respectively. The PRD1 decay rate was calculated to be 0.3/day. The findings of this study suggest that the CDE model and analytical moment equations represent a suitable option to characterize virus transport performance in surface flow constructed wetlands.