Energy Storage Application of CaO/Graphite Nanocomposite Powder Obtained from Waste Eggshells and Used Lithium-Ion Batteries as a Sustainable Development Approach.

The reuse of waste materials has recently become appealing due to pollution and cost reduction factors. Using waste materials can reduce environmental pollution and product costs, thus promoting sustainability. Approximately 95% of calcium carbonate-containing waste eggshells end up in landfills, unused. These eggshells, a form of bio-waste, can be repurposed as catalytic electrode material for various applications, including supercapacitors, after being converted into CaO. Similarly, used waste battery electrode materials pose environmental hazards if not properly recycled. Various types of batteries, particularly lithium-ion batteries, are extensively used worldwide. The recycling of used lithium-ion batteries has become less important considering its low economic benefits. This necessitates finding alternative methods to recover and reuse the graphite rods of spent batteries. Therefore, this study reports the conversion of waste eggshell into calcium oxide by high-temperature calcination and extraction of nanographite from spent batteries for application in energy storage fields. Both CaO and CaO/graphite were characterized for their structural, morphological, and chemical compositions using XRD, SEM, TEM, and XPS techniques. The prepared CaO/graphite nanocomposite material was evaluated for its efficiency in electrochemical supercapacitor applications. CaO and its composite with graphite powder obtained from used lithium-ion batteries demonstrated improved performance compared to CaO alone for energy storage applications. Using these waste materials for electrochemical energy storage and conversion devices results in cheaper, greener, and sustainable processes. This approach not only aids in energy storage but also promotes sustainability through waste management by reducing landfills.

Optical and UV Shielding Properties of Inorganic Nanoparticles Embedded in Polymethyl Methacrylate Nanocomposite Freestanding Films.

Polymethyl methacrylate (PMMA) is an interesting polymer employed in various applications due to its outstanding properties. However, its electrical and mechanical properties can be further improved by incorporating nanoparticles, and in particular, PMMA nanocomposite with nanoparticles provides various multifunctional properties. This work reports PMMA nanocomposite preparation and structural and optical characterizations incorporating carbon nanotubes (CNTs), TiO2 nanoparticles, and carbon quantum dots (CQDs). CNT/PMMA, TiO2/PMMA, and CQD/PMMA nanocomposite freestanding films were prepared using a simple solution method. Various properties of the prepared composite films were analyzed using scanning electron microscopy, X-ray diffraction, photoluminescence, Fourier transform infrared, and UV-Vis and Raman spectroscopy. Optical parameters and photocatalytic dye degradation for the films are reported, focusing on the properties of the materials. The CNT/PMMA, TiO2/PMMA, and CQD/PMMA films achieved, respectively, good electrical conductivity, photodegradation, and fluorescence compared with other composite films.

Metal Organic Framework-Derived ZnO@GC Nanoarchitecture as an Effective Hydrogen Gas Sensor with Improved Selectivity and Gas Response.

Although they are not as favorable as other influential gas sensors, metal-oxide semiconductor-based chemiresistors ensure minimal surface reactivity, restricting their gas selectivity, gas response, and reaction kinetics, particularly when functioning at room temperature (RT). A hybrid design, which includes metal-oxide/carbon nanostructures and passivation with specific gas filtration layers, can address the concerns of surface reactivity. We present a novel hierarchical nanostructured zinc oxide (ZnO), decorated with graphitic carbon (GC) and synthesized via a wet-chemical strategy, which is then followed by the self-assembly of a zeolitic imidazolate framework (ZIF-8). Because of its large surface area, high porosity, and efficient inspection of other analyte (interfering) gases, the ZnO@GC can provide intensified surface reactivity at RT. In the present study, such a hybrid sensor confirmed extraordinary gas sensing properties, which was characterized by excellent H2 selectivity, fast response, rapid recovery kinetics, and high gas response (ΔR/R0 ∼ 124.6%@10 ppm), particularly in extremely humid environments. The results reveal that adsorption sites provided by the ZIF-8 template-based ZnO@GC frameworks facilitate the adsorption and desorption of H2.

Establishment of a Rapid Micropropagation System for Kaempferia parviflora Wall. Ex Baker: Phytochemical Analysis of Leaf Extracts and Evaluation of Biological Activities.

This study aimed to establish a rapid in vitro plant regeneration method from rhizome buds of Kaempferia parviflora to obtain the valuable secondary metabolites with antioxidant and enzyme inhibition properties. The disinfection effect of silver oxide nanoparticles (AgO NPs) on rhizome and effects of plant growth regulators on shoot multiplication and subsequent rooting were investigated. Surface sterilization of rhizome buds with sodium hypochlorite was insufficient to control contamination. However, immersing rhizome buds in 100 mg L-1 AgO NPs for 60 min eliminated contamination without affecting the survival of explants. The number of shoots (12.2) produced per rhizome bud was higher in Murashige and Skoog (MS) medium containing 8 µM of 6-Benzyladenine (6-BA) and 0.5 µM of Thidiazuron (TDZ) than other treatments. The highest number of roots (24), with a mean root length of 7.8 cm and the maximum shoot length (9.8 cm), were obtained on medium MS with 2 µM of Indole-3-butyric acid (IBA). A survival rate of 98% was attained when plantlets of K. parviflora were acclimatized in a growth room. Liquid chromatography with tandem mass spectrometry (LC-MS/MS) was used to determine the chemical profile of K. parviflora leaf extracts. Results showed that several biologically active flavonoids reported in rhizomes were also present in leaf tissues of both in vitro cultured and ex vitro (greenhouse-grown) plantlets of K. parviflora. We found 40 and 36 compounds in in vitro cultured and ex vitro grown leaf samples, respectively. Greenhouse leaves exhibited more potent antioxidant activities than leaves from in vitro cultures. A higher acetylcholinesterase inhibitory ability was obtained for greenhouse leaves (1.07 mg/mL). However, leaves from in vitro cultures exhibited stronger butyrylcholinesterase inhibitory abilities. These results suggest that leaves of K. parviflora, as major byproducts of black ginger cultivation, could be used as valuable alternative sources for extracting bioactive compounds.

Facile Synthesis of Molybdenum Diselenide Layers for High-Performance Hydrogen Evolution Electrocatalysts.

A cost-effective solution-based synthesis route to grow MoSe2 thin films with vertically aligned atomic layers, thereby maximally exposing the edge sites on the film surface as well as enhancing charge transport to the electrode, is demonstrated for hydrogen evolution reaction. The surface morphologies of thin films are investigated by scanning electron microscopy and atomic force microscopy, and transmission electron microscopy analyses confirm the formation of the vertically aligned layered structure of MoSe2 in those films, with supporting evidences obtained by Raman. Additionally, their optical and compositional properties are investigated by photoluminescence and X-ray photoelectron spectroscopy, and their electrical properties are evaluated using bottom-gate field-effect transistors. The resultant pristine MoSe2 thin film exhibited low overpotential of 88 mV (at 10 mA·cm-2) and a noticeably high exchange current density of 0.845 mA·cm-2 with excellent stability, which is superior to most of other reported MoS2 or MoSe2-based catalysts, even without any other strategies such as doping, phase transformation, and integration with other materials.