Gas and Liquid Phase Imaging of Foam Flow Using Pure Phase Encode Magnetic Resonance Imaging.

Magnetic resonance imaging (MRI) is a non-invasive and non-optical measurement technique, which makes it a promising method for studying delicate and opaque samples, such as foam. Another key benefit of MRI is its sensitivity to different nuclei in a sample. The research presented in this article focuses on the use of MRI to measure density and velocity of foam as it passes through a pipe constriction. The foam was created by bubbling fluorinated gas through an aqueous solution. This allowed for the liquid and gas phases to be measured separately by probing the 1H and 19F behavior of the same foam. Density images and velocity maps of the gas and liquid phases of foam flowing through a pipe constriction are presented. In addition, results of computational fluid dynamics simulations of foam flow in the pipe constriction are compared with experimental results.

Velocity mapping of fast flows using a linearly ramped gradient waveform.

We report a new pure phase encoding measurement for velocity mapping. Velocity-sensitization is achieved using a repeating, linearly ramped gradient waveform instead of rectangular bipolar pulsed field gradients. This approach reduces eddy current effects and results in the sample experiencing a gradient waveform that more closely matches the ideal input. Errors in k-space mapping and calculated velocity values are reduced when contrasted with the previous measurement method. Velocity maps were acquired of high-speed (c. 6 m/s) water flow through a pipe constriction. The application of linearly ramped gradient waveforms to non-velocity-encoded imaging measurements is discussed.

Magnetic field gradient waveform correction of motion-sensitized SPRITE by pre-equalization.

Eddy currents caused by pulsed field gradients in magnetic resonance measurements of high-speed flow cause the magnetic field gradient amplitude waveform experienced by the sample to be different from the waveform demanded of the magnetic field gradient amplifiers. By measuring and using the system impulse response, pre-equalization magnetic field gradient waveform correction can be used to counteract the resulting errors in measured signal phase at the cost of minimal additional experimental time. The effectiveness of the pre-equalization method of magnetic field gradient waveform correction is tested with a motion-sensitized (pulsed field gradient) version of the SPRITE imaging pulse sequence which requires extreme gradient slew rates in excess of 1000 T/m/s in a 6.7-cm-bore set of gradient windings. Pre-equalized, motion-sensitized SPRITE is used to create velocity maps of high-speed (c. 4 m/s) water flow through a pipe constriction.

Motion-sensitized SPRITE measurements of hydrodynamic cavitation in fast pipe flow.

The pressure variations experienced by a liquid flowing through a pipe constriction can, in some cases, result in the formation of a bubble cloud (i.e., hydrodynamic cavitation). Due to the nature of the bubble cloud, it is ideally measured through the use of non-optical and non-invasive techniques; therefore, it is well-suited for study by magnetic resonance imaging. This paper demonstrates the use of Conical SPRITE (a 3D, centric-scan, pure phase-encoding pulse sequence) to acquire time-averaged void fraction and velocity information about hydrodynamic cavitation for water flowing through a pipe constriction.