Enrichment of Starch Desserts with the Addition of Apple Juice and Buckwheat Fiber.

Buckwheat hulls which are rich in fiber are good ingredients to increase the nutritional value of food products. The aim of this study was to determine the effect of the applied additives in the form of fiber and apple juice on the properties of both potato and corn starch (normal and waxy). In order to characterize the rheological properties of kissel, the pasting characteristic was measured. In the obtained gels, the basic quality parameters were determined. The analysis of texture, color parameters, and also total polyphenol content were determined. Buckwheat hulls, in addition to their high fiber content, are a valuable source of phenolic compounds and can be a great additive in starch desserts. The addition of buckwheat hulls and apple juice improved the nutritional value of the final products but also caused changes in the technological qualities: it increased the initial temperature of potato starch mixtures (by approx. 9 °C); it decreased the viscosity of cold desserts (from 8 to 55%); and increased the hardness of the final product by more than 7 times. In the case of other starches, the recorded changes were much smaller than for potato starch-based products.

Comparison of the Rheological Behavior of Fortified Rye-Wheat Dough with Buckwheat, Beetroot and Flax Fiber Powders and Their Effect on the Final Product.

This study was focused on the replacement of the part of the flour (10% w/w) in rye-wheat bread with three different botanical origin powders with a high dietary fiber content (buckwheat hulls, beetroot and flax powder). The dough was based on rye-wheat flour without and with the addition of fiber powders with different botanical origins and was tested, and the quality of the finished baked products made from those doughs were assessed. In order to characterize the flour mixtures, their basic parameters were determined, and their pasting characteristic was performed. The dough parameters were described by the Burger rheological model and also the creep and recovery test. On the other hand, in bread, the basic parameters of baking, crumb and crust color parameters were determined, and an analysis of the crumb texture was carried out. Additionally, a sensory analysis of the finished products was carried out. The applied fiber additives influenced the pasting characteristics of the tested rye-wheat flour and were influenced by the dough rheological properties. It was found that used fiber powders changed the quality parameters of the final products. Despite this, using fiber at the amount of 10% as a flour substitute allowed us to obtain bread of a similar quality to the control sample.

An Insight into Pasting and Rheological Behavior of Potato Starch Pastes and Gels with Whole and Ground Chia Seeds.

With regard to technological innovations, we applied chia (oilseeds) as a stabilizer additive in a normal and waxy potato starch sample to obtain stable starch-based gels during 20 days of storage. The aim of this study was to investigate the 5% w/w normal and waxy potato starch pastes (hot samples) and gels (cold samples) with the addition of 1% w/w whole and ground chia seeds properties as pasting and flow properties of pastes and textural properties of gels. The pasting process using a viscograph showed that normal and waxy potato starch with the addition of chia had a different pasting characteristic. The addition of chia seeds had a greater effect on the properties of normal potato starch than waxy potato starch. From a rheological point of view, starch pastes without chia were less theologically stable as they showed bigger areas of hysteresis loops. Minor changes in the hardness of gels were obtained in normal starch gels with chia seeds during 20 days of storing compared to the samples without chia seeds, whereas in the waxy starch gels, the effect was the opposite.

The Impact of Fiber from Buckwheat Hulls Waste on the Pasting, Rheological and Textural Properties of Normal and Waxy Potato Starch Gels.

The aim of this study was to investigate the impact of fiber from buckwheat hull waste (BH) on the pasting, rheological, and textural properties of 4% and 5% (w/w) pastes and gels based on the potato starches with different amylose/amylopectin contents. The starch and starch/fiber mixtures were characterized by pasting and flow measurements as well as by viscoelastic and textural analysis. The pasting properties showed a greater BH effect (0.2%) on the gelatinization of PS than WPS. The starch gels and starch fiber mixtures showed biopolymer gel behavior. In the WPS/BH pastes, a smaller increase in hardness was noted compared to PS/BH.

Quality Assessment of Wheat Bread Incorporating Chia Seeds.

The aim of this study was to develop a concept of production for wheat bread enriched with chia seeds and to examine selected physicochemical properties. The examined product was wheat-flour bread made by a single-phase method, using yeast. The production concept assumed the modification of the recipe by replacing part of the wheat flour (1 or 5% w/w) with whole (CHw) or ground chia seeds (CHg). Bread quality was determined by calculating: dough yield, bread yield, baking loss, total baking loss and loaf volumes. Color was determined using the CIE L*a*b* system. In the texture analysis, the following texture parameters were measured: hardness, cohesion, chewiness and elasticity. The contents of crude fat, crude fiber, total protein, total ash and the total content of polyphenols were assessed to characterize the nutritive value of the bread. The breads with 1% addition of chia (1%CHw, 1%CHg) were characterized by the highest volume of loaves, which increased by at least 8.6% compared to the control bread (C), while in the case of 5% chia, the loaf volume depended on the form of seeds (better results were obtained with whole seeds). Substituting wheat flour with 1% chia seeds (whole or ground) resulted in a significant increase in nutritional value. For potential bread manufacturers, from a technological and economic point of view, replacing wheat flour with whole chia seeds at 1% (w/w) is most advantageous, compared to 5% (w/w).

The Effect of the Addition of Dietary Fibers from Apple and Oat on the Rheological and Textural Properties of Waxy Potato Starch.

The aim of this paper was to investigate the influence of dietary fibers from oat (OF) and apple (AF) (concentration 0.2%) on the pasting properties, rheological (including thixotropic and anti-thixotropic) and textural properties of 3% and 4% (w/w) waxy potato starch pastes. The samples were characterized by their pasting characteristics, the hysteresis loop test, and textural properties measured during storage. It was found that the breakdown viscosity values of the blends, including oat fibers, were lower than those of the others (waxy potato starch (WPS), WPS-AF), which suggests that these samples would have higher resistance to retrogradation and therefore would form a more stable paste. The pattern of flow curves showed that the investigated waxy potato starch and starch-fiber pastes were non-Newtonian fluids, thinned by shear. Areas of the hysteresis loops indicated that pastes with fibers had anti-thixotropic or mixed thixotropic/anti-thixotropic character. The greatest areas of the anti-thixotropy hysteresis loops were characteristic for WPS, while its mixtures with AF and OF caused a decrease in the value of these areas. It can indicate that starch-fiber blends were more stable during shearing. Fiber-type and starch concentration strongly affected the textural parameters of the starch-fiber gels.

Thixotropic properties of waxy potato starch depending on the degree of the granules pasting.

This paper presents the rheological instability (thixotropy/antithixotropy) of waxy potato starch (WPS) pastes depending on their concentration (1-5% w/w) and pasting temperature (80, 95 and autoclaved: 121°C, at 0.1MPa). The hysteresis loop, apparent viscosity at constant shear rate as well as the in-shear structural recovery tests with and without pre-shearing were applied. The pastes were also characterized by the granularity profile, molecular weight, polydispersity and optical transmittance. Differences in rheological properties of the pastes prepared at 80 and 95°C as well as autoclaved resulted from degree of granules pasting. At 121 °C dissolution of the granules occurred, while at the lower temperatures only the partial pasting of the granules took place. Pasting temperature of WPS significantly influenced rheological parameters of the resulted pastes which had thixotropic, antithixotropic or mixed thixotropic/antithixotropic behavior. Autoclaved pastes, regardless their concentration were antithixotropic as demonstrated by the areas of hysteresis loops derived from the flow curves signalized by the degree of structure recovery (DSR) which exceeded unity. The apparent viscosity of WPS pasted at 121°C strongly decreased as compared to the samples pasted at lower temperatures. Samples pasted at 80 and 95°C showed both thixotropic and antithixotropic behavior, with a predominance of the latter. The starch concentration played an important role in the formation of the rheological properties of the resulted pastes. Its influence was strongly connected with the degree of the granules pasting, therefore with the temperature of pastes preparation. For the pastes prepared at 80 and 95°C the values of thixotropy and apparent viscosity increased, while the values of DSR decreased with an increase of concentration. In the autoclaved pastes the antithixotropy, DSR and apparent viscosity increased with increasing starch concentration. It was also found that apart from the concentration and temperature also the shear rate influence the thixotropic behavior.

Thixotropic properties of normal potato starch depending on the degree of the granules pasting.

The aim of this paper was the study of the rheological instability (thixotropy and/or antithixotropy) of normal potato starch (NPS) pastes depending on their concentration (2-5%) and degree of pasting. Flow curves with hysteresis loops, apparent viscosity at constant shear rate and in-shear structural recovery tests were carried out. Granule size profiles, the pasting characteristic of corresponding starch suspensions and the transmittance of the pastes, the molecular weights and polydispersity of granular starch and its pastes prepared at 80, 95 and 121°C were also studied. The degree of pasting was dependent on the temperature and the concentration and influenced strongly the rheological behavior of the pastes. All pastes belonged to the non-Newtonian liquids thinned by shear and were rheologically unstable to the various extent. Thixotropic properties were connected to the size and the number of the starch granules in the pastes as well as depended on the measuring method used. In the 2 and 3% samples pasted at 80°C the swelling of the granules prevailed their destruction (thixotropy was observed). In the other samples the destruction predominated the swelling (antithixotropy observed).