Using of geographic information systems (GIS) to determine the suitable site for collecting agricultural residues.

The main aim of this study is to use the Geographic Information Systems (GIS) techniques to determine the optimum site to collect the residues in order to reduce cost and increase the benefits. To achieve these three scenarios were studied to reach the best collection sites for recycling rice straw in Sinbilawin center. The results indicate that the first scenario: The result was forty (40) collection sites in this status the cost of transfer will be very high because the collecting starts from inside village to the 40 sites and transfer to main sites to recycle operation. The second scenario: The total lengths of roads are not much then the cost of transfer is low and save time and efforts. The third scenario: The result was five collecting sites. It was shortest length and lowest cost. Transportation costs in the first scenario were difficult to calculate because of the difficulty to access a network of documented roads from satellite maps to use it with the GIS program. The total internal transport costs were 987,308.86 and 826,966.43 L.E (Egyptian pound, $ = 19.15 L.E) for second and third scenarios, respectively. The average transport costs per ton were 17 and 14 L.E/ton for the second and third scenarios, respectively. Also, the total lengths of roads were 817.62 and 615.65 km for the second and third scenarios, respectively.

Influence of water stress on engineering characteristics and oil content of sunflower seeds.

Knowing some physical and mechanical characteristics and oil percentage of sunflower seeds could be useful for harvesting and processing equipment and activities such as transportation, storage, food production processes and establishing database of this seed. The main aim of this research was to study the effect of water stress during irrigation on seed's properties and quality. For this purpose, a field experiment was done under four deficit irrigation treatments [80%, 60%, 100-80 (100% irrigation requirement ETc to seed formation, and then reduced to 80% until harvesting) and 100-60% (100% ETc to seed formation, and then reduced to 60% until harvesting)] in comparable with full irrigation (100%). Geometrical, gravimetrical and mechanical characteristics as well as oil seed content and yield of sunflower seed were estimated. Result showed that there was no significant effect of low (100-80%) and medium (80%) irrigation deficit treatments on geometrical, gravimetrical and mechanical characteristics, while applying 60% of irrigation requirement (ETc) showed a significant effect on them. On the other hand, low and medium irrigation stress treatments improved the oil yield and seed oil content. The highest increase was 8.54% and 5.6% for oil yield and oil content respectively, considering T100-80 followed by applying 80% ETc, but with high water stress (60% ETc) oil yield and seed oil content significantly decreased.