Environmental health science research: opportunities and challenges for some developing countries in Africa.

Due to ongoing developmental projects, there is a need for regular monitoring of the impact of pollutants on the environment. This review documented the challenges and opportunities in the field of environmental health sciences in some African countries. A systematic review was used to investigate opportunities and challenges in the field of environmental health science in Africa by examining published work with a specific focus on Africa. The reports showed that funding and infrastructure as the major problems. The study also highlighted recruiting study participants, retention, and compensation as a bane in the field in Africa. The absence of modern equipment also hinders research. The review, however, noted research collaboration from the region including studies on emerging pollutants such as pharmaceuticals, per and polyfluoroalkyl substances (PFAS), and microplastic (MPs) as great opportunities. The study concluded that collaboration with other continents, exchange programs and improved governmental interventions may help.

Trace metals concentrations in fresh milk from dairy farms and stores: An assessment of human health risk.

Milk may be consumed daily for the supply of essential nutrients in the body, however, depending on the source, milk may contain different concentrations of trace metals. The present study investigated the presence of trace metals in fresh milk purchased from different dairy farms and stores to determine the possible health risks to humans. A total of 15 fresh milk samples were purchased from various dairy farms (7 fresh milk samples) and stores (8 milk samples). Trace metals in collected milk samples were determined using Inductively Coupled Plasma Mass Spectrometer (ICP-MS). The human health risk was determined through the Hazard Quotient (HQ), Carcinogenic and Non-carcinogenic Risk. The results showed the presence of trace metals in fresh milk stores in the following order Pb>As>Se>Cr>Ni. The highest concentration for all the elements was recorded in Mg from milk purchased from the stores and ranged from 3.37±0.16 mg/L to 4.70±0.43 mg/L. In all the milk samples analyzed, levels of As, Pb, Se, Cr, and other elements were within the acceptable range recommended by the World Health Organization (WHO). Differences obtained in the concentrations of trace metals from both the purchased milk samples and those from the dairy farms were not significant (p<0.05). The Estimated Daily Intake (EDI) and Hazard Quotient Index showed no potential health risk for each trace metal indicating no health risk for the milk consumers at this stage. The traces of trace metals in the milk samples suggest the need for regular monitoring of trace metals in milk samples because prolonged exposure to these trace metals may seriously endanger the health of consumers.

POST-OPERATIVE INTENSIVE CARE UNIT ADMISSION FOR ELECTIVE BRAIN TUMOUR SURGERIES: A NIGERIAN NEUROSURGICAL UNIT EXPERIENCE.

Background: Patients, post elective brain tumour surgeries, are usually admitted into the Intensive Care Unit (ICU) for quick identification of life-threatening complications or for elective ventilation. The Covid-19 pandemic exerted additional strain on the limited ICU spaces. This study was to probe the need for ICU admission following elective surgery for brain tumour in our environment on the background of enormous constraints. Methods: Data was collected prospectively from patients who had elective brain tumour surgery over 12-months at the University College Hospital, Ibadan. Data included the indications for ICU admission and outcome. Chi-square test and Student t-test were used for analysis at α ≤ 0.05. Results: There were 56 patients with a mean age of 44.6 years and M:F ratio of 1:1. 61.8% of the patients were admitted into the ICU for observation. Patients who had open surgeries were 2 times more likely to be admitted (p<0.01; OR = 2.2, CI: 2.0 - 36.8) than those who had endoscopic surgeries. Awake craniotomy patients did not require ICU care compared with the 63% of the patients who had General Anaesthesia + Endo Tracheal Tube (GA+ETT). Patients with skull base and posterior fossa tumours were more likely to be admitted into the ICU (p=0.036). Of the 34 patients admitted into the ICU, 11(19.6%) had prolonged ICU stay and were 2 times more likely to die compared with those with short admissions (p<0.01; OR = 2.5, CI: 2.29 - 70.02). Conclusion: Observation is the main reason patients are admitted into the ICU. The endoscopic and awake surgery approaches appear to preclude the need for ICU admission, thus capable of cutting costs.

Sustainability of multifaceted usage of biomass: A review.

The paper focuses on collection of information on recent multifaceted usage of biomass materials with critical examination on its sustainability. The use of biomass is becoming popular, with wide global acceptance as it is considered as green technology. The use of biomass products across industrial parallels, the material combination and production processes were elucidated in this paper. Biomass materials are seen as affordable alternative to conventional materials for domestic and industrial applications. The multifaceted use of biomass, which includes, energy generation, metallurgical applications, construction purposes, reinforcement in metal matrix composite, microelectromechanical system, biochemical and traditional medicine were discussed. This underscores the need to develop a sustainable plan to meet with its diverse usage to be beyond laboratory efforts. This paper examined whether the availability of biomass can sustain its multifaceted usage or not. It also examined the modalities to ensure sustainable use of biomass. Different policies were highlighted and discussed in line with continuous multifaceted use of biomass.

Optimization of heat treatment parameters of medium carbon steel quenched in different media using Taguchi method and grey relational analysis.

Quenching is one of the major processes of heat treatment of medium carbon steel that aims at improving its mechanical properties. However, the effectiveness of this process is dependent on several control factors that must be maximized to obtain optimum results in terms of hardness, yield strength, ultimate tensile strength among others. This study aims at optimizing the process of improving the mechanical properties of medium carbon steel by varying some key factors like the quenchant used (A), heat treatment temperature (B), and soaking time (C). The measured responses in this study were the hardness, yield strength (YS), and ultimate tensile strength (UTS). Optimization was conducted in two stages. The first stage dealt with the mono-optimization of process parameters using Taguchi's Signal-to-Noise (S/N) ratio. A total of nine (9) experiments were performed based on standard L9 orthogonal array because each of the three control factors has three (3) levels. The second stage was multi-objective optimization using Taguchi-based grey relational analysis (GRA). The optimal conditions for hardness, YS, and UTS were obtained at A2B3C3, A3B2C3, and A3B3C3, respectively. Using ANOVA as statistical analysis, it was observed that the soaking time was the main control factor for all three measured responses (31.95% contribution ratio for hardness, 62.46%, and 66.76% for YS and UTS, respectively), while the quenchant had the least contribution. Analysis of the Taguchi-based GRA revealed that the results obtained are in total conformance to that of the Taguchi method, with soaking time having the highest contribution ratio of 69.41%.

Dataset for the development of a diagnostic schedule for a defective LC-195V5 CNC milling machine at FUTA central workshop.

The dataset represented in this article describe a diagnostic schedule for a defective LC-195V5 CNC milling machine using PERT. The efficiency of the technicians who repaired the CNC machine tools was measured based on fault location within the shortest possible time. A diagnostic schedule was developed which showed the sequential means of troubleshooting within a possible shortest time. Two approaches were employed. Forward Pass (FP), which involved the diagnosis from electrical parts through Computer (CNC) to mechanical components and Backward Pass (BP) which involved the diagnosis from computer component through electrical parts to mechanical parts. Three different levels of expertise (trials) were used for each of the mode of diagnosis and the time to diagnose each component part was recorded. Two separate PERT network diagrams were drawn based on the inter-relationship of the component parts of the machine and their Critical Paths were determined.

Dataset on the evaluation of chemical and mechanical properties of steel rods from local steel plants and collapsed building sites.

The quality of steel rods used in structural applications has been subjected to continuous scrutiny by researchers in Nigeria. In this data article, the experimental data on the chemical and mechanical properties of steel rods from collapsed building sites and local steel plants have been reported. The chemical composition consisting of carbon, manganese, silicon, sulphur, phosphorus among other elements were recorded using an optical emission spectrometer. Some of the main elements were used to evaluate the carbon equivalent value and the results are reported in this article. The yield strength, ultimate tensile strength and percentage elongation were also presented as obtained from the universal testing machine. The hardness values of the steel rod samples were also presented.

Experimental data on mechanical properties evaluation of medium carbon steel quenched in different waste media.

Several wastes can be instrumental in the improvement of the mechanical properties of medium carbon steel when quenched. The quenching media employed such as coconut water (CW), pap water (PW) and spent engine oil (SPE) have been largely considered as wastes. The data in this article are related to the research article titled "Mechanical Properties Improvement Evaluation of Medium Carbon Steels Quenched in Different Media" (Ikubanni et al., 2017) [1]. The article provides information on the mechanical properties evaluation of medium carbon steel quenched in different media. Twenty-seven (27) samples of medium carbon steel samples were heated to temperatures of 730 °C, 760 °C and 790 °C and soaked for 30, 45 and 60 min respectively. The test results recorded include hardness value, yield strength (YS) and the ultimate tensile strength (UTS) for each of the samples at different heating temperatures and soaking time for the different quenching media.

Costs and benefits of routine follow-up after curative treatment for endometrial cancer.

OBJECTIVE: To examine the costs of routine outpatient follow-up after curative treatment of endometrial cancer, and to determine whether this leads to early detection of recurrence or survival. The impact of specific disease characteristics on survival is examined. DESIGN: Retrospective chart review, and calculation of costs. SETTING: Ottawa Regional Cancer Centre-Civic Division (ORCC-C). PATIENTS: All 432 patients referred to the ORCC-C with endometrial cancer between 1982 and 1991 who received treatment with curative intent and who continued with routine follow-up. RESULTS: Cancer recurred in 50 patients (11.57%). There was no statistically significant difference in overall survival between patients with symptomatic and asymptomatic recurrences, or between those with recurrences detected during routine follow-up visits or in the interval between routine visits. Of 4830 Papanicolaou (Pap) smears performed routinely, cancer was detected in 6 cases. The mean cost of the routine follow-up procedures for each patient with a recurrence was $19,200. CONCLUSION: Intensive follow-up of women with endometrial cancer does not result in improved survival. A prospective randomized study is warranted to evaluate other potential benefits of follow-up, such as improved quality of life or decreased morbidity. There is no economic or clinical justification for the routine use of the Pap smear in the follow-up of patients with endometrial cancer. The potential benefits of routine follow-up in endometrial cancer and other types of cancer with favourable prognoses warrant critical evaluation.