RESUMO
The new demands for sustainable operation in the chemical industry due to increasing environmental regulations and agreements have generated the need to adapt existing processes to more intelligent production. The plastics sector is in a complex position due to its contribution to economic development and the climate crisis. Therefore, environmental assessment has become an important tool due to the benefits it provides by quantifying the environmental performance of processes, allowing it to balance operational and environmental needs. Polyvinyl chloride (PVC) is one of the most globally used polymers thanks to its resistance, flexibility, and cost-effectiveness. The polymer is synthetized by suspension polymerization, which is characterized by high productivity and controllability. However, it presents problems associated with intensive energy consumption and the emission of toxic substances and greenhouse gases. Therefore, an environmental assessment of the suspension PVC production process was performed using the waste reduction algorithm (WAR). The potential environmental impact (PEI) was quantified using the generation rate and the output velocity for four cases and three different fuels. It was found that the process transforms raw materials with high impacts, such as VCM, into substances with lower PEI, such as PVC. However, the process has a high generation of PEI due to the effects of energy consumption (-2860, -2410, 3020, and 3410 for cases 1-4, respectively). The evaluation of the toxicological impacts shows that the ATP category is the only one that presents a positive generation value (75 PEI/day); the product contributes to the formation and emission of impacts. The atmospheric categories showed that the energy consumption of the process is the most critical aspect with a contribution of 91% of the total impacts emitted. The AP and GWP categories presented the highest values. It was determined that the most suitable fuel is natural gas; it has lower impacts than liquid and solid fuels (coal). Additionally, it can be concluded that the PVC production process by suspension is environmentally acceptable compared to the polyethylene or polypropylene processes, with output impacts 228 and 2561 times lower, respectively.