Design of an antioxidant powder additive based on carvacrol encapsulated into a multilayer chitosan-alginate-maltodextrin emulsion.

Carvacrol has demonstrated antioxidant activity; however, its high volatility and low water solubility limit its direct application in food matrices. Then, an effective encapsulation system is required to protect it. This study aimed to design and characterize a carvacrol-based additive encapsulated in a spray-dried multilayer emulsion based on chitosan/sodium alginate/maltodextrin. Spray-drying temperature of 120 °C and 3 %(w/w) maltodextrin content maximized both encapsulation efficiency (~97 %) and loading capacity (~53 %). The powder's antioxidant properties were evaluated in two food simulant media: water (SiW) and water-ethanol (SiD). The highest antioxidant activity was observed in SiW for both ABTS•+ (8.2 ± 0.3mgEAG/g) and FRAP (4.1 ± 0.2mgEAG/g) methods because of the reduced release of carvacrol in SiD vs. SiW, as supported by micro- and macrostructural observations by SAXS and microscopy, respectively. An increase from 143 to 157 °C attributable to carvacrol protection and Tg = 44.4 °C (> ambient) were obtained by TGA and DSC, respectively. FT-IR confirmed intermolecular interactions (e.g. -COO- and -NH3+) as well as H-bonding formation. High water solubility (81 ± 3 %), low hygroscopicity (8.8 ± 0.2 %(w/w), poor flowability (CI:45 ± 4), and high cohesiveness (HR:1.8 ± 0.1) between particles were achieved, leading to a powdered antioxidant additive with high potential for applications which required avoiding/reducing oxidation on hydrophilic and hydrophobic food products.

Bioaccessibility assay, antioxidant activity and consumer-oriented sensory analysis of Beta vulgaris by-product encapsulated in Ca(II)-alginate beads for different foods.

Bioaccessibility analysis and antioxidant activity along in vitro digestion and a consumer-oriented sensory analysis were conducted in three potential functional foods based on Ca(II)-alginate beads containing bioactive compounds extracted from beet stems. Ca(II)-alginate beads per se, and two selected products (cookies and turkish delights supplemented with the beads) were prepared. Regarding the beads, among the attributes rated by consumers, visual appreciation predominates, being color in the just-as-right (JAR) category and in the like preference. Instead, both flavor and sweet taste were attributes highly penalized and should be improved in beads to be accepted as food per se. A higher percentage of customers preferred cookies and turkish delights instead of only beads, considering global satisfaction. Regarding in vitro digestion, there was a significant content of phenolic compounds in the products with beads, showing a bioaccessibility greater than 80% (for cookies) and 26% (for turkish delights). Also, the antioxidant capacity measured by ABTS ranged between 50 and 109% for cookies and turkish delights, being lower when measured by FRAP (between 20 and 30%, respectively). Thus, including the beads with beet stem extract in both products leads to a significant increase in the content of phenolic compounds and in the antioxidant capacity compared to their counterparts, protecting the compound during oral and gastric phases. These results allow the generation of improved Ca(II)-alginate systems with promising functional properties for the development of ingredients and functional foods.

Effects of in vitro digestion-fermentation over global antioxidant response and short chain fatty acid production of beet waste extracts in Ca(ii)-alginate beads.

The aim of the present work was to analyze the effect of in vitro gastrointestinal digestion-fermentation on antioxidant capacity, total phenols and production of short chain fatty acids (SCFAs) from biocompounds derived from beet waste (leaf and stem) encapsulated in different formulations of Ca(ii)-alginate beads. The encapsulated systems presented higher antioxidant capacity in different phases (digested and fermented) than the extracts without encapsulation, making Ca(ii)-alginate beads a suitable delivery vehicle. Levels of total phenolic compounds and antioxidant capacity of the fermented fraction were up to ten times higher than those of the digested fraction, boosted by the contribution of bioactive compounds from the by-product of beet as well as by sugars and biopolymers. Among the formulations used, those that had excipients (sugars and/or biopolymers) presented a better overall antioxidant response than the beads with just alginate. Guar gum and sucrose lead to a promising enhancement of Ca(ii)-alginate beads not only for preservation and protection but also in terms of stability under in vitro digestion-fermentation and production of SCFAs.

High-intensity ultrasound-assisted extraction of phenolic compounds from cowpea pods and its encapsulation in hydrogels.

Currently and according to the growing worldwide interest in the revaluation of agricultural by-products, the use of legumes waste presents great potential to obtain bioactive compounds. In this context, an extract rich in phenolic compounds was obtained from Vigna unguiculata (cowpea) pods by optimizing the high-intensity ultrasound conditions (10 min and 36% of amplitude) using response surface methodology. Then, the extract was encapsulated in Ca(II)-alginate beads with the addition of arabic or guar gums or cowpea isolated proteins. A complete morphological study by image analysis and microstructural evaluation by SAXS has been carried out. Results showed that beads containing alginate and alginate-guar gum have the highest loading efficiency of total phenolic compounds (47 ± 5%) and antioxidant activity (44 ± 3%). However, the coupled effect of the cowpea extract and the isolated proteins (at it higher concentration) increased the antioxidant capacity of the beads due to the contribution of the phenolic compounds and the amino acids with anti-radical activity, reaching a value of 67 ± 3 % of inhibition of ABTS.+. Finally, the microstructural analyses revealed that cowpea pod extract increased the interconnectivity of the rods due to the presence of trivalent cations, conferring versatility, and larger coordination to the network. Also, it was observed that the addition of cowpea proteins produced more interconnected bigger and fewer compacts rods than beads containing only alginate, increasing 12 and 49 % the interconnection and the size, respectively, and decreasing 10 % their compactness. This research demonstrated the use of cowpea sub-products as a source of bioactive compounds that further modulate the microstructure of the hydrogel network, and the outstanding potential for being incorporated in techno-functional foods by using Ca(II)-alginate as a carrier.

Effect of in vitro digestion-fermentation of Ca(II)-alginate beads containing sugar and biopolymers over global antioxidant response and short chain fatty acids production.

The aim of the present paper was to unravel the effect of a standardized in vitro European protocol of digestion-fermentation over Ca(II)-alginate beads synthesized with sugars and biopolymers. Special emphasis on the antioxidant capacity using methods that simulate physiological conditions, short-chain fatty acids (SCFAs) production, and a detailed study of the microstructure of the gel network by SAXS at several scales (1-100 nm) were considered. Beads released high antioxidant capacity during digestion assessed by several methods, comparable to some common foods; antioxidant capacity was improved with sucrose and arabic gum inclusion in the formulation. After fermentation by gut microbiota, a ten-fold increase in the antioxidant values and an important SCFAs production were obtained, revealing the enhanced ability to produce these functional biomolecules. The microstructural analysis of Ca(II)-alginate showed an advantageous behavior: they slightly changed in oral and gastric fluids and partially dissolved their structure in intestinal fluid, where absorption occurs.

Freezing and drying of pink grapefruit-lycopene encapsulated in Ca(II)-alginate beads containing galactomannans.

Lycopene extracted from pink grapefruit was encapsulated on Ca(II)-alginate beads with the addition of trehalose and galactomannans to improve its stability against freezing and drying. Three galactomannans of different physicochemical properties were studied since their inclusion affects both loading efficiency and release of lycopene in wet beads; however, there is no information about their performance during freezing and dehydration operations. The remaining lycopene and its stability towards isomerization were analyzed in beads subjected to continuous freezing, freezing/thawing cycles and vacuum- and freeze-drying. Isothermal crystallization studies were conducted by LF-NMR and related to beads formulation and lycopene stability. In the absence of excipients, lycopene was severely affected by all the treatments, retaining less than 20% of the original content. Alginate beads containing trehalose with guar gum protected more than 80% of the lycopene regardless of the employed freezing or drying methods. These beads concomitantly showed higher solid fraction than the other two galactomannans-containing systems, displaying guar gum ability to associate water. On the other hand, the addition of vinal gum affected lycopene stability (between 40 and 60% were recovered after treatments), even compromising the positive effect of a well-established cryoprotectant as trehalose. Thus, the addition of secondary excipients should be carefully conducted. The differences among galactomannans could be related to the substitution degree of the polymer chains, affecting the overall systems interactions. These results can contribute to excipients selection for the encapsulation of labile biomolecules in Ca(II)-alginate beads subjected to freezing and drying.

Effects of pH, extrusion tip size and storage protocol on the structural properties of Ca(II)-alginate beads.

The Ca(II)-alginate beads were formulated changing some synthesis variables: pH (3.8-6.8), extrusion tip size (0.25-0.50 mm) and washing/storage protocol, to evaluate possible implications in the structural properties of beads, which are critical to scale and standardize their production at industrial level. Regardless of the macro- (diameter, area, perimeter and roundness, studied by image analysis) and micro-structural (size, density and interconnectivity of rods assessed by SAXS) parameters analyzed, there are no effects related to the washing and storage protocol employed for any synthesis conditions. Structural parameters are only influenced by the synthesis pH. Both washing protocol and extrusion tip size effects on the consolidation of the alginate network are negligible at each pH value. Besides, none of the synthesis variables affected the availability of water within the beads as assessed by diffusion coefficient and water activity measurements. A model, relating chain-chain interactions and polymer chain packing, is proposed.