Microplastics in the Volta Lake: Occurrence, distribution, and human health implications.

Pollution of plastic waste in aquatic ecosystems in Ghana is of significant concern with potential adverse effects on food safety and ecosystem function. This study examined the abundance and distribution of microplastics (MPs) in freshwater biota samples namely: the African river prawn (Macrobrachium vollenhovenii), the Volta clam (Galatea paradoxa), Nile tilapia (Oreochromis niloticus), and sediment from the Volta Lake. Both biota and sediment samples were subjected to microscopic identification and FTIR analysis. In biota samples, the highest mean microplastic abundance of 4.7 ± 2.1 items per individual was found in the prawn, while the Nile tilapia recorded the least (2.8 ± 0.6 items per individual). A total of 398 microplastic particles were observed in sediment samples from the Volta Lake. Microfibers were the major plastic shapes identified in biota and sediment samples. We examined the relationship between microplastic abundance, biota size, and sediment properties. Despite the lack of statistical significance, microplastic shape, size, and polymer composition in assessed organisms mirrored those in the benthic sediment. Polyethylene, polypropylene, polyester, and polystyrene were the four dominant polymer types identified in the organisms and sediments. Although the estimated human exposure was relatively low compared with studies from other regions of the world, the presence of microplastics raises concern for the safety of fisheries products consumed by the general populace in the country. This research is essential for developing effective mitigation measures and tackling the wider effects of microplastic contamination on Ghana's freshwater ecosystems, particularly the Volta Lake.

Further to quantification of content, can reflectance spectroscopy determine the speciation of cobalt and nickel on a mine waste dump surface?

Toxic elements released due to mining activities are of the most important environmental concerns, characterised not only by their concentration, but also by their distribution among different chemical species, known as speciation. These are conventionally determined using chemical analysis and sequential extraction, which are expensive and time-demanding. In this study, the possibility of using visible-near-infrared-shortwave infrared (VNIR-SWIR) reflectance spectroscopy was investigated as an alternative technique to quantify the contents of cobalt (Co) and nickel (Ni) in soil samples collected from Sarcheshmeh copper mine waste dump surface, in Iran. As a novel approach, the capability of VNIR-SWIR spectroscopy was also investigated in speciation of those elements. Three machine learning (ML) techniques (i.e., extreme gradient boosting (EGB), random forest (RF) and support vector regression (SVR)) were used to make relationships between soil spectral responses and Co and Ni contents of the samples. For all ML algorithms, the best prediction accuracies were obtained by the models developed on the first derivative (FD) spectra (for Co: RMSEp values of 7.82, 8.03 and 9.22 mg·kg-1, and for Ni: RMSEp values of 9.88, 10.32 and 11.02 mg·kg-1, using EGB, RF and SVR, respectively). Spatial variability maps of elements showed relatively similar patterns between observed and predicted values. Correlation and ML (EGB, RF, SVR)-based methods revealed that the most important wavelengths for Co and Ni prediction were those related to iron oxides/hydroxides and clay minerals, as two main soil properties responsible for controlling their speciation. This study demonstrated that the EGB technique was successful at indirect quantification and spatial variability mapping of Co and Ni on the mine waste dump surface. In addition, it provided an inspiration for implementation of the VNIR-SWIR reflectance spectroscopy as a potentially fast and cost-effective method for speciation studies of toxic elements, especially in heterogeneous soil environments.

Prediction of the concentration of cadmium in agricultural soil in the Czech Republic using legacy data, preferential sampling, Sentinel-2, Landsat-8, and ensemble models.

The current study assesses and predicts cadmium (Cd) concentration in agricultural soil using two Cd datasets, namely legacy data (LD) and preferential sampling-legacy data (PS-LD), along with four streams of auxiliary datasets extracted from Sentinel-2 (S2) and Landsat-8 (L8) bands. The study was divided into two contexts: Cd prediction in agricultural soil using LD, ensemble models, 10 and 20 m spatial resolution of S2 and L8 (context 1), and Cd prediction in agricultural soil using PS-LD, ensemble models and 10 and 20 m spatial resolution of S2 and L8 (context 2). In context 1, ensemble 1, L8 with PS-LD was the cumulative optimal approach that predicted Cd in agricultural soil with a higher R2 value of 0.76, root mean square error (RMSE) of 0.66, mean absolute error (MAE) of 0.35, and median absolute error (MdAE) of 0.13. However, with R2 = 0.78, RMSE = 0.63, MAE = 0.34, and MdAE = 0.15, ensemble 1, S2 of PS-LD was the best prediction approach in predicting Cd concentration in agricultural soil in context 2. Overall, the predictions from both contexts indicated that ensemble 1 of S2 combined with PS-LD was the most appropriate and best model for Cd prediction in agricultural soil. The modeling approaches' uncertainty in both contexts was assessed using ensemble-sequential gaussian simulation (EnSGS), which revealed that the degree of uncertainty propagated in the study area was within 5% in both contexts. The combination of the PS dataset and the LD along with ensemble models and the remote sensing dataset, produced promising results. Nonetheless, the results demonstrated that the 20 m spatial resolution band dataset used in the prediction of Cd in agricultural soil outperformed the 10 m spatial resolution. When PS is combined with LD, an appropriate modeling approach, and a well-correlated remote sensing dataset are used, good results are obtained.

Prediction of the concentration of antimony in agricultural soil using data fusion, terrain attributes combined with regression kriging.

Potentially toxic elements in agricultural soils are primarily derived from anthropogenic and geogenic sources. This study aims to predict and map antimony (Sb) concentration in soil using multiple regression kriging in two distinct modeling approaches, namely Sb prediction using data fusion coupled with regression kriging (scenario 1) and Sb prediction using data fusion, terrain attributes, and regression kriging (scenario 2). Cubist regression kriging (cubist_RK), conditional inference forest regression kriging (CIF_RK), extreme gradient boosting regression kriging (EGB_RK) and random forest regression kriging (RF_RK) were the modeling techniques used in the estimation of Sb concentration in agricultural soil. The validation results suggested that in scenario 1, EGB_RK was the optimal modeling approach for Sb prediction in agricultural soil with root mean square error (RMSE) = 1.31 and mean absolute error (MAE) = 0.61, bias = 0.37, and high coefficient of determination R2 = 0.81. Similarly, the EGB_RK was also the optimal modeling approach in scenario 2, with the highest R2 = 0.76, RMSE = 0.90, bias = 0.06, and MAE = 0.48 values than the other regression kriging modeling approaches. The cumulative assessment suggested that the EGB_RK in scenario 2 yielded optimal results compared to the respective modeling approach in scenario 1. The uncertainty propagated by the modeling approaches in both scenarios indicated that the degree of uncertainty during the modeling process was distributed across the study area from a low to a moderate uncertainty level. However, cubist_RK in scenario 2 exhibited some elevated spots of uncertainty levels. As a result, the combination of data fusion, terrain attributes, and regression kriging modeling approaches produces optimal results with a high R2 value, minimal errors as well as bias. Furthermore, combining terrain attributes with data fusion is promising for reducing model error, bias and yielding high-accuracy predictions.

Optimal zinc level and uncertainty quantification in agricultural soils via visible near-infrared reflectance and soil chemical properties.

Zinc (Zn) is a vital element required by all living creatures for optimal health and ecosystem functioning. Therefore, several researchers have modeled and mapped its occurrence and distribution in soils. Nonetheless, leveraging model predictive performances while coupling information derived from visible near-infrared (Vis-NIR) and soils (i.e. chemical properties) to estimate potential toxic elements (PTEs) like Zn in agricultural soils is largely untapped. This study applies two methods to rapidly monitor Zn concentration in agricultural soil. Firstly, employing Vis-NIR and machine learning algorithms (MLAs) (Context 1) and secondly, applying Vis-NIR, soil chemical properties (SCP), and MLAs (Context 2). For the Vis-NIR information, single and combined pretreatment methods were applied. The following MLAs were used: conditional inference forest (CIF), partial least squares regression (PLSR), M5 tree model (M5), extreme gradient boosting (EGB), and support vector machine regression (SVMR) respectively. For context 1, the results indicated that M5-MSC (M5 tree model-multiplicative scatter correction) with coefficient of determination (R2) = 0.72, root mean square error (RMSE) = 21.08 (mg/kg), median absolute error (MdAE) = 13.69 and ratio of performance to interquartile range (RPIQ) = 1.63 was promising. Regarding context 2, CIF with spectral pretreatment and soil properties [CIF-DWTLOGMSC + SCP (conditional inference forest-discrete wavelet transformation-logarithmic transformation-multiplicative scatter correction-soil chemical properties)] yielded the best performance of R2 = 0.86, RMSE = 14.52 (mg/kg), MdAE = 6.25 and RPIQ = 1.78. Altogether, for contexts 1 and 2, the CIF-DWTLOGMSC + SCP approach (context 2) was the best Zn model outcome for the agricultural soil. The uncertainty map revealed a low to high error distribution in context 1, and a low to moderate distribution in context 2 for all models except CIF, which had some patches with high uncertainty. We conclude that a multiple optimization approach for modeling Zn levels in agricultural soils is invaluable and may provide fast and reliable information needed for area-specific decision-making.

Combination of enrichment factor and positive matrix factorization in the estimation of potentially toxic element source distribution in agricultural soil.

The study intended to assess the level of pollution of potential toxic elements (PTEs) at different soil depths and to evaluate the source contribution in agricultural soil. One hundred and two soil samples were collected for both topsoil (51), and the subsoil (51) and the content of PTEs (Cr, Cu, Cd, Mn, Ni, Pb, As and Zn) were determined using inductively coupled plasma-optical emission spectroscopy (ICP-OES). The concentrations of Zn and Cd in both soil horizons indicated that the current study levels were higher than the upper continental crust (UCC), world average value (WAV), and European average values (EAV). Nonetheless, the concentration values of PTEs such as Mn and Cu for EAV, As, Cu, Mn, and Pb for UCC, and Pb for WAV were lower than the average values of the corresponding PTEs in this study. The single pollution index, enrichment factor, and ecological risk revealed that the pollution level ranged from low to high. The pollution load index, Nemerow pollution index, and risk index all revealed that pollution levels ranged from low to high. The spatial distribution confirmed that pollution levels varied between the horizons; that is, the subsoil was considered slightly more enriched than the topsoil. Principal component analysis identified the PTE source as geogenic (i.e. for Mn, Cu, Ni, Cr) and anthropogenic (i.e. for Pb, Zn, Cd, and As). PTEs were attributed to various sources using enrichment factor-positive matrix factorization (EF-PMF) and positive matrix factorization (PMF), including geogenic (e.g. rock weathering), fertilizer application, steel industry, industrial sewage irrigation, agrochemicals, and metal works. Both receptor models allotted consistent sources for the PTEs. Multiple linear regression analysis was applied to the receptor models (EF-PMF and PMF), and their efficiency was tested and assessed using root-mean-square error (RMSE), mean absolute error (MAE), and R2 accuracy indicators. The validation and accuracy assessment of the receptor models revealed that the EF-PMF receptor model output significantly reduces errors compared with the parent model PMF. Based on the marginal error levels in RMSE and MAE, 7 of the 8 PTEs (As, Cd, Cr, Cu, Ni, Mn, Pb, and Zn) analysed performed better under the EF-PMF receptor model. The EF-PMF receptor model optimizes the efficiency level in source apportionment, reducing errors in determining the proportion contribution of PTEs in each factor. The purpose of building a model is to maximize efficiency while minimizing inaccuracy. The marginal error limitation encountered in the parent model PMF was circumvented by EF-PMF. As a result, EF-PMF is feasible and useful for apparently polluted environments, whether farmland, urban land, or peri-urban land.

Prediction of nickel concentration in peri-urban and urban soils using hybridized empirical bayesian kriging and support vector machine regression.

Soil pollution is a big issue caused by anthropogenic activities. The spatial distribution of potentially toxic elements (PTEs) varies in most urban and peri-urban areas. As a result, spatially predicting the PTEs content in such soil is difficult. A total number of 115 samples were obtained from Frydek Mistek in the Czech Republic. Calcium (Ca), magnesium (Mg), potassium (K), and nickel (Ni) concentrations were determined using Inductively Coupled Plasma Optical Emission Spectroscopy. The response variable was Ni, while the predictors were Ca, Mg, and K. The correlation matrix between the response variable and the predictors revealed a satisfactory correlation between the elements. The prediction results indicated that support vector machine regression (SVMR) performed well, although its estimated root mean square error (RMSE) (235.974 mg/kg) and mean absolute error (MAE) (166.946 mg/kg) were higher when compared with the other methods applied. The hybridized model of empirical bayesian kriging-multiple linear regression (EBK-MLR) performed poorly, as evidenced by a coefficient of determination value of less than 0.1. The empirical bayesian kriging-support vector machine regression (EBK-SVMR) model was the optimal model, with low RMSE (95.479 mg/kg) and MAE (77.368 mg/kg) values and a high coefficient of determination (R2 = 0.637). EBK-SVMR modelling technique output was visualized using a self-organizing map. The clustered neurons of the hybridized model CakMg-EBK-SVMR component plane showed a diverse colour pattern predicting the concentration of Ni in the urban and peri-urban soil. The results proved that combining EBK and SVMR is an effective technique for predicting Ni concentrations in urban and peri-urban soil.

Multi-geochemical background comparison and the identification of the best normalizer for the estimation of PTE contamination in agricultural soil.

Identifying a suitable geochemical background level (GBL) and an appropriate normalizer is imperative for ensuring soil quality, health, and security. The objective of this study was to identify the appropriate normalizer and suitable GBL for determining PTE enrichment levels in agricultural soils and investigate if there are any statistical differences due to the GBL [World Average Value (WAV) European Average Value (EAV)] used. Forty-nine topsoil samples were obtained from seven agricultural communities in the Frdek-Mstek District (Czech Republic). Portable X-ray fluorescence was used to determine the total PTEs (Cr, Ni, Cu, Y, Ba, Th, As, Pb, and Zn) concentration levels in the soil. Correlation matrix analysis was used to determine the metallic relationship between the PTEs and the normalizers (Al, Fe, Ti, Zr, Sr and Rb). Pollution indices such as contamination factor (CF), geoaccumulation index (Igeo) and enrichment factor (EF) analysis were used to determine the most suitable GBL. Al, Fe, Sr, Ti and Rb strongly correlated with the CF, Igeo and EF, whereas WAV performed better than the other geochemical background (EAV). The results indicated that Rb was the suitable normalizer and WAV was the appropriate GBL for agricultural soil and provided a foundation for evaluating and surveilling soil quality and health in agricultural soil.

A geostatistical approach to estimating source apportionment in urban and peri-urban soils using the Czech Republic as an example.

Unhealthy soils in peri-urban and urban areas expose individuals to potentially toxic elements (PTEs), which have a significant influence on the health of children and adults. Hundred and fifteen (n = 115) soil samples were collected from the district of Frydek Mistek at a depth of 0-20 cm and measured for PTEs content using Inductively coupled plasma-optical emission spectroscopy. The Pearson correlation matrix of the eleven relevant cross-correlations suggested that the interaction between the metal(loids) ranged from moderate (0.541) correlation to high correlation (0.91). PTEs sources were calculated using parent receptor model positive matrix factorization (PMF) and hybridized geostatistical based receptor model such as ordinary kriging-positive matrix factorization (OK-PMF) and empirical Bayesian kriging-positive matrix factorization (EBK-PMF). Based on the source apportionment, geogenic, vehicular traffic, phosphate fertilizer, steel industry, atmospheric deposits, metal works, and waste disposal are the primary sources that contribute to soil pollution in peri-urban and urban areas. The receptor models employed in the study complemented each other. Comparatively, OK-PMF identified more PTEs in the factor loadings than EBK-PMF and PMF. The receptor models performance via support vector machine regression (SVMR) and multiple linear regression (MLR) using root mean square error (RMSE), R square (R2) and mean square error (MAE) suggested that EBK-PMF was optimal. The hybridized receptor model increased prediction efficiency and reduced error significantly. EBK-PMF is a robust receptor model that can assess environmental risks and controls to mitigate ecological performance.

Trend analysis of global usage of digital soil mapping models in the prediction of potentially toxic elements in soil/sediments: a bibliometric review.

The rising and continuous pollution of the soil from anthropogenic activities is of great concern. Owing to this concern, the advent of digital soil mapping (DSM) has been a tool that soil scientists use in this era to predict the potentially toxic element (PTE) content in the soil. The purpose of this paper was to conduct a review of articles, summarize and analyse the spatial prediction of potentially toxic elements, determine and compare the models' usage as well as their performance over time. Through Scopus, the Web of Science and Google Scholar, we collected papers between the year 2001 and the first quarter of 2019, which were tailored towards the spatial PTE prediction using DSM approaches. The results indicated that soil pollution emanates from diverse sources. However, it provided reasons why the authors investigate a piece of land or area, highlighting the uncertainties in mapping, number of publications per journal and continental efforts to research as well as published on trending issues regarding DSM. This paper reveals the complementary role machine learning algorithms and the geostatistical models play in DSM. Nevertheless, geostatistical approaches remain the most preferred model compared to machine learning algorithms.

Source apportionment, contamination levels, and spatial prediction of potentially toxic elements in selected soils of the Czech Republic.

The sustenance of humans and livestock depends on the protection of the soil. Consequently, the pollution of the soil with potentially toxic elements (PTEs) is of great concern to humanity. The objective of this study is to investigate the source apportionment, concentration levels and spatial distribution of PTEs in selected soils in Frýdek-Místek District of the Czech Republic. The total number of soil samples was 70 (topsoil 49 and 21 subsoils) and was analysed using a portable XRF machine. Contamination factor and the pollution index load were used for the assessment and interpreting the pollution and distribution of PTEs in the soils. The inverse distance weighting was used for the spatial evaluation of the PTEs. The results of the analysis showed that the area is composed of low-to-high pollution site. PTEs displayed spatial variation patterns. The average PTE concentration decreases in this Fe > Ti > Ba > Zr > Rb > Sr > Cr > Y>Cu > Ni > Th order for the topsoil and also decreases in this Fe > Ti > Zr > Ba > Rb > Sr > Cr > Y > Cu > Ni > and Th order for the subsoil. These PTEs Cr, Ni, Cu, Rb, Y, Zr, Ba, Th, and Fe were far above the baseline European average value and the World average value level, respectively. The source apportionment showed the dominance of Cr, Ni, Rb, Ti, Th, Zr, Cu, Fe in the topsoil, while the subsoil was dominated by all the PTEs (factor 1 to 6) except Ba. The study concludes that indiscriminate human activities have an enormous effect on soil pollution.