Environmental hazard and risk assessment of thiochemicals. Application of integrated testing and intelligent assessment strategies (ITS) to fulfil the REACH requirements for aquatic toxicity.

REACH requires information on hazardous properties of substances to be generated avoiding animal testing where possible. It is the objective of the present case study with thiochemicals to extract as much information as possible from available experimental data with fish, daphnia and algae and to fill data gaps for analogues to be registered under REACH in 2018. Based on considerations of chemical similarity and common mode of action (MOA) the data gaps regarding the aquatic toxicity of the thiochemicals were largely closed by trend analysis ("category approach") and read-across within the same group, for example, thioglycolates or mercaptopropionates. Among 16 thiochemicals to be registered by 2018 there are only 2 substances with sufficient data. 36 data gaps for 14 thiochemicals were identified. Most of the required data (>60%) could be estimated by in silico methods. Only 14 tests (6 algae, 6 daphnia, 1 limit fish test and 1 acute fish test) were proposed. When the results of these tests are available it has to be discussed whether 2 further fish (limit) tests are required. For two substances (exposure-based) waiving was suggested. The relatively high toxicity of the thiochemicals is manifested in low predicted no-effect concentrations (PNECs). Only preliminary predicted environmental concentrations (PECs) could be derived for the thiochemicals for which a risk assessment has to be performed (production rate >10 t/y). The preliminary PEC/PNEC ratios indicate no risk for the aquatic compartment at the production site. PECs due to down-stream use must not exceed the estimated PNECs.

The German postgraduate degree program in ecotoxicology (SETAC GLB and GDCh): a success story.

This article gives a comprehensive overview on the strategy, the development and the progress of the German postgraduate degree program in ecotoxicology (SETAC GLB and GDCh). The program soon prompted positive results: more than 10 years now the courses had an average enrolment rate of 90 %, and employment-seeking graduates from the first courses mostly succeeded in quickly finding employment relevant to their training. With over 450 students enrolled to date, the degree program contributes significantly to the field of Environmental Chemistry and Ecotoxicology.

Integrated testing and intelligent assessment-new challenges under REACH.

BACKGROUND, AIM AND SCOPE: Due to a number of drawbacks associated with the previous regime for the assessment of new and existing chemicals, the European Union established a new regulation concerning the registration, evaluation, authorisation and restriction of chemicals (REACH). All relevant industrial chemicals must now be assessed. Instead of the authorities, industry itself is responsible for the risk assessment. To achieve better and more efficient assessments while reducing animal testing, all information-standard, non-standard and non-testing-has to be used in an integrated manner. To meet these challenges, the current technical guidance documents for risk assessment of new and existing chemicals had to be updated and extended considerably. This was done by experts in a number of REACH Implementation Projects. This paper presents the most relevant results of the expert Endpoint Working Group on Aquatic Toxicity in order to illustrate the change of paradigm in the future assessment of hazards to the aquatic environment by chemical substances. MAIN FEATURES AND CHALLENGES: REACH sets certain minimum data requirements in order to achieve a high level of protection for human health and the environment. It encourages the assessor to use alternative information instead of or in addition to standard one. This information has to be equivalent to the standard information requirement and adequate to draw overall conclusions with respect to the regulatory endpoints classification and labelling, persistent, bioaccumulative and toxic (PBT) assessment and predicted no-effect concentrations (PNEC) derivation. The main task of the expert working group was to develop guidance on how to evaluate the toxicity of a substance based on integration of information from different sources and of various degrees of uncertainty in a weight of evidence approach. INTEGRATED TESTING AND INTELLIGENT ASSESSMENT: In order to verify the equivalence and adequacy of different types of information, a flexible sequence of steps was proposed, covering characterisation of the substance, analysis of modes of action, identification of possible analogues, evaluation of existing in vivo and in vitro testing data as well as of QSAR results. Finally, all available data from the different steps have to be integrated to come to an overall conclusion on the toxicity of the substance. This weight of evidence approach is the basis for the development of integrated testing strategies (ITS), in that the available evidence can help to determine subsequent testing steps and is essential for an optimal assessment. Its flexibility helps to meet the different requirements for drawing conclusions on the endpoints classification and labelling, PNEC derivation as well as PBT assessment. The integration of all kinds of additional information in a multi-criteria assessment reduces the uncertainties involved with extrapolation to the ecosystem level. The weight of evidence approach is illustrated by practical examples. CONCLUSIONS AND PERSPECTIVES: REACH leads to higher challenges in order to make sound decisions with fewer resources, i.e. to move away from extensive standard testing to an intelligent substance-tailored approach. Expert judgement and integrated thinking are key elements of the weight of evidence concept and ITS, potentially leading to better risk assessments. Important sub-lethal effects such as endocrine disruption, which are not covered by the current procedure, can be considered. Conclusions have to be fully substantiated: Risk communication will be an important aspect of future assessments.

Acute to chronic ratios in aquatic toxicity--variation across trophic levels and relationship with chemical structure.

For fish, daphnids, and algae, acute to chronic ratios (ACRs) have been determined from experimental data regarding new and existing chemicals. Only test results in accord with the European Union Technical Guidance Document (TGD) and validated by authorities were considered. Whereas the median ACRs of 10.5 (fish), 7.0 (daphnids), and 5.4 (algae) are well below the ACR safety factor of 100 as implied by the TGD, individual ACRs vary considerably and go up to 4400. The results suggest that a safety factor of 100 is not protective for all chemicals and trophic levels. Neither a correlation between ACR and baseline toxicity as modeled through the logarithmic octanol-water partition coefficient nor an ACR correlation across trophic levels exists. Narcosis is associated with a preference for a low ACR; nevertheless, low ACRs are frequently obtained for nonnarcotics. Analysis of chemical structures led to the derivation of structural alerts to identify compounds with a significantly increased potential for a high ACR, which may prove to be useful in setting test priorities. At present, however, life-cycle tests are the only way to conservatively predict long-term toxicity.

Environmental risk assessment of airborne trichloroacetic acid--a contribution to the discussion on the significance of anthropogenic and natural sources.

In environmental risk assessments the question has to be answered, whether risk reduction measures are necessary in order to protect the environment. If the combination of natural and anthropogenic sources of a chemical substance leads to an unacceptable risk, the man-made emissions have to be reduced. In this case the proportions of the anthropogenic and natural emissions have to be quantified. Difficulties and possible solutions are discussed in the scope of the OECD- and EU-risk assessments of trichloroacetic acid (TCA) and tetrachloroethylene. In the atmosphere, TCA is formed by photo-oxidative degradation of tetrachloroethylene (PER) and 1,1,1-trichloroethane. The available data on atmospheric chemistry indicate that tetrachloroethylene is the more important pre-cursor. With its high water solubility and low volatility, TCA is adsorbed onto aerosol particles and precipitated during rainfalls. Extended monitoring in rainwater confirmed the global distribution of airborne TCA. TCA reaches soils by dry and wet deposition. In addition formation of TCA from tetrachloroethylene in plants was observed. Consequently, high concentrations were detected in needles, leaves and in forest soil especially in mountain regions. The effect assessment revealed that plants exposed via soil are the most sensitive species compared to other terrestrial organisms. A PNECsoil of 2.4 microg/kg dw was derived from a long-term study with pine and spruce seedlings. When this PNEC is compared with the measured concentrations of TCA in soil, in certain regions a PEC/PNEC ratio >1 is obtained. This clearly indicates a risk to the terrestrial ecosystem, with the consequence that risk reduction measures are deemed necessary. To quantify the causes of the high levels of TCA in certain soils, and to investigate the geographical extent of the problem, intensive and widespread monitoring of soil, air and rainwater for TCA and tetrachloroethylene would be necessary to be able to perform a full mass balance study at an appropriate number of sites. In addition, measurements of the 14C content in TCA isolated from soil could clarify whether a significant proportion of the TCA occurs from natural sources. The possible formation of TCA in soil can also be tested by incubation of isotope enriched inorganic chloride with subsequent mass spectrometry of TCA.