The effect of light compressive and tensile mechanical forces on SOST and POSTN expressions in human periodontal ligament cells: an in vitro study.

Periodontal ligament (PDL) cells play an important role in mechanosensing and secretion of signaling molecules during bone remodeling. However, the regulatory mechanism is unknown. The aim of the present study is to investigate the expression pattern of periostin and sclerostin in response to orthodontic forces in periodontal ligament cells in vitro. PDL cells were isolated from extracted teeth and treated with compressive forces of 25 gr/cm2 or equiaxial tension forces at frequency 1 Hz for 0, 24, 48, and 72 h. qRT-PCR was applied to evaluate the gene expressions. The secretion of sclerostin and periostin was assessed using ELISA. DAPI staining was used to evaluate apoptosis. The expression of sclerostin elevated significantly at protein and gene levels under compression forces after 24 h, while the application of tensile forces induced the expression of periostin and its upstream regulator RUNX2 (p < 0.05). Gene expression up-regulation was significant for POSTN and RUNX2 after 48 and 72 h tensile forces. Also, the gene expression of sclerostin reduced in a time-dependent manner after application of tensile force. The compression forces enhanced apoptosis to 7.5 ± 3.5% and induced gene expression of apoptotic markers of CASP9, and BCL2 within 72 h of exposure. Periostin and sclerostin play an important role in orthodontic loads and their expressions are affected oppositely by compressive and tensile forces that might be suggested as a biomarker for assessment of bone remodeling during orthodontic treatment.

Erratum: Effect of amitriptyline on orthodontic tooth movement in rats: An experimental study.

[This corrects the article DOI: 10.34172/joddd.2020.033.].

Effect of Hemostatic Agents on Shear Bond Strength of Orthodontic Eyelets Bonded with Conventional and Self-etch Adhesives.

Statement of the Problem: The risk of debonding of the orthodontic eyelets due to blood contamination from the impacted tooth is a clinical problem that orthodontists face routinely. Purpose: This study aimed to assess the effect of hemostatic agents (Viscostat clear and Astringedent X) on shear bond strength (SBS) of orthodontic eyelets bonded with conventional (Transbond XT) and universal adhesive (GC-G Premio bond) adhesives. Materials and Method: In this experimental study, 84 freshly extracted bovine lower incisors were randomly divided into 7 groups namely TBXT, Blood, SEP, VISCO + TBXT, VISCO + SEP, ASTX + TBXT, and ASTX + SEP groups. In the TBXT group, teeth were etched with phosphoric acid gel, and then, the Transbond XT primer was applied and eyelets were bonded with Transbond XT. In the blood group, first, contamination with blood was done followed by the same procedure as TBXT. In other groups, the teeth were etched with phosphoric acid and based on their group allocation, Transbond XT primer (in TBXT groups), GC-G Premio Bond (in SEP groups), ViscoStat Clear gel (in VISCO groups), or Astringedent X (in ASTX groups) were applied. The SBS was measured for each group and the adhesive remnant index (ARI) was determined. Results: The mean SBS was 20.79 MPa in VISCO+SEP group, 19.2 MPa in the TBXT group, 16.06 MPa in the SEP group, 15.43 MPa in VISCO+TBXT group, 9.39 MPa in AST-X+TBXT group, and 1.62 MPa in the blood group. The SBS of ASTX+SEP, blood and TBXT+ASTX groups had significant differences from the SBS of the control group (p< 0.05). The ARI score of 0 had the highest frequency in the blood group. Conclusion: Due to the high coagulative effect of Astringedent X and acceptable SBS of Astringedent X in combination with GC-G Premio bond, this combination can be recommended for exposure of impacted teeth that are at high risk of blood contamination.

Antimicrobial effects and mechanical properties of poly(methyl methacrylate) as an orthodontic acrylic resin containing Curcumin-Nisin-poly(L-lactic acid) nanoparticle: an in vitro study.

BACKGROUND: The porous surface of acrylic orthodontic removable appliances creates a niche for microbial plaque accumulation, and changes the oral flora by raising cariogenic bacteria including Streptococcus mutans. In this study, we evaluated the mechanical properties and antimicrobial activities of incorporating different concentrations of Curcumin-Nisin-poly(L-lactic acid) nanoparticle (CurNisNps) into orthodontic acrylic resin against Streptococcus mutans and Candida albicans. METHODS: Following synthesis and characterization of CurNisNps, acrylic resin specimens with different concentrations of CurNisNps (0, 1, 2, 5, and 10% w/w) were fabricated. Flexural strength values, antimicrobial effects, anti-biofilm potential, and anti-metabolic activity against S. mutans and C. albicans were assessed at different time intervals. Also, the expression of the virulence-factor-related genes of S. mutans and C. albicans was assessed by quantitative real-time polymerase chain reaction following treatment with CurNisNps. RESULTS: Acrylic resin containing 10% CurNisNps (30.76 ± 3.91 MPa) showed flexural failure in comparison with acrylic resin specimens without CurNisNps (50.67 ± 1.82 MPa) as the control group (P < 0.05). There was no significant decrease in the flexural strength values in samples containing 1, 2, and 5% of CurNisNps in comparison to the control group (P > 0.05). Acrylic resin with 5% CurNisNps showed the highest concentration of CurNisNps and clinically accepted flexural strength value (14.89 ± 3.26 MPa, P < 0.05) simultaneously. In the disc agar diffusion assay, 5% CurNisNps showed a high level of inhibitory activity for the test microorganisms. The reduction of growth inhibition zones of the different concentrations of CurNisNps against test microorganisms was positively associated with the time, in such a way that it was reduced significantly after 60 days. The anti-biofilm and anti-metabolic activities of acrylic resin specimens containing a 5% concentration of CurNisNps against S. mutans and C. albicans could significantly decrease the expression levels of gtfB (6.8-fold) and HWP (3.4-fold) in S. mutans and C. albicans, respectively. CONCLUSIONS: Our data support that 5% (w/w) of CurNisNps can serve as an excellent orthodontic acrylic resin additive against S. mutans and C. albicans biofilm without adverse effects on its mechanical property.

Effect of amitriptyline on orthodontic tooth movement in rats: an experimental study.

Background. Orthodontic tooth movement (OTM) occurs in the alveolar bone; therefore, any condition affecting bone quality can alter OTM. This study aimed to evaluate the effect of amitriptyline on OTM in rats. Methods. Forty-five male Wistar rats were randomly divided into three groups: (I) no injection, (II) injection with saline solution, and (III) injection of amitriptyline. Next, a 60-gr force was applied to the maxillary left first molar tooth of all the rats, using a nickel‒titanium closed-coil spring ligated between the maxillary incisors and the left first molar tooth. The rats were sacrificed after 21 days to measure OTM and perform histological analysis to determine the number, width, and depth of resorptive lacunae, osteoclast counts, and periodontal ligament (PDL) width. Results. The highest and the lowest OTM rates were found in the control and amitriptyline groups, respectively; however, there was no significant difference between the study groups in this regard. Histological analysis showed a significantly lower number of resorption lacunae in the amitriptyline group than the saline group. Conclusion. Although no significant difference was noted in OTM after amitriptyline administration, a reduction in the number of resorptive lacunae in rats injected with amitriptyline suggests that amitriptyline affects the bone tissue at the cellular level.

Design and Development of Dentistry Ethical Codes: Proposed for National Implementation in Iran.

OBJECTIVES: The dental profession has a special place of trust in the society, and dental clinicians must adhere to ethical standards in all dental procedures. Ethical conduct is one of the main expectations of individuals from this profession. The aim of this study was to design and develop dental ethical codes for national implementation in Iran. MATERIALS AND METHODS: This qualitative study was performed using directed content analysis method and purposive sampling. Data were collected until saturation through 15 semi-structured face-to-face individual interviews and two expert panels with academic staffs from dental faculties in Tehran, Iran. RESULTS: Data were classified into five principles and 90 codes. The principles included consideration of patients' interest as a priority, respect for human dignity and patient autonomy, confidentiality of patient information, the excellence of knowledge and skills, and building trust. CONCLUSION: The ethical codes for Iranian dentists were drafted considering Islamic teachings and the prevailing culture. Some codes were exclusively developed for the cultural atmosphere of Iran especially on topics such as interaction with patients previously treated by other dentists. Some codes addressed the principles of consultation and continuing the therapeutic communication with such patients. Some items have not been considered in codes released by other associations, such as religious considerations in Islamic cover and alcohol consumption that were taken into consideration in this draft. These codes can serve as a guide for professional practice of dentists. It seems that these sets can help us reach the standardized code.

Prevention of Enamel Adjacent to Bracket Demineralization Following Carbon Dioxide Laser Radiation and Titanium Tetra Fluoride Solution Treatment: An In Vitro Study.

Introduction: The aim of this study was to assess the caries-preventive potential of carbon dioxide (CO2) laser application in conjunction with the use of titanium tetra fluoride solution on the enamel adjacent to bracket. Methods: Seventy-five freshly extracted bovine incisors were used. In order to attach the brackets, the area of examination was covered with adhesive tape to limit acid etching of the entire enamel surface. Metal orthodontic brackets for upper central were bonded to all the teeth following the manufacturer's instruction. Then all the teeth were painted with 2 layers of acid-resistant nail varnish on all surfaces except the boxes area cervical to the brackets. The teeth were then randomly divided into five groups (n = 15): control group (C); laser group (L); titanium group (T); laser-titanium group (LT) and titanium-laser group (TL). The laser-titanium group was first irradiated with CO2 laser (same as the L group) then TiF4 solution was applied on the enamel (same as the T group). Samples in the TL group were first treated with TiF4 solution (same as the T group) and then irradiated with CO2 laser on the surface (same as the L group). Then, the teeth were immersed in pH-cycling solutions. After that, the amount of calcium released into the two solutions (de- and re-mineralization) was measured with an atomic absorption spectroscopy. The data were analyzed by one-way Analysis of var-iance (ANOVA) and Tukey test. Results: Calcium loss in LT, TL and T groups were significantly lower than those in the L and C groups (P < 0.05). Conclusion: The application of Titanium tetra fluoride 4% solution on enamel can inhibit as much as 87% of subsequent caries like lesion progression.

Prevalence of blood-borne viruses among Iranian dentists: Results of a national survey.

OBJECTIVES: Health care workers, including dentists, are at the front line for acquiring blood-borne virus infections. This study aimed to investigate the prevalence of hepatitis B, hepatitis C and human immunodeficiency viruses among Iranian dentists. MATERIAL AND METHODS: The survey included 1628 dental health care workers who attended the 51st annual Congress of the Iranian Dental Association. Data on the risk of blood-borne virus transmission during health care and infection control practices were gathered from self-administered questionnaires. Sera were screened serologically by enzyme-linked immunosorbent assay (ELISA). The positive samples were examined by polymerase chain reaction (PRC) followed by direct sequencing. RESULTS: Six (0.36%) and 81 (5.0%) were positive for hepatitis B surface antigen (HBsAg) and (anti-hepatitis B virus core antigen (anti-HBc), respectively. Only 1 (0.061%) was positive for anti-hepatitis C virus (anti-HCV). No case was positive for anti-human immunodeficiency virus (anti-HIV). One case was diagnosed as being occult hepatitis B virus (HBV) infection. One thousand five hundred thirty-five (94.3%) of participants had received at least 1 dose of HBV vaccine. One thousand three hundred fifty-nine (88.5%) contained hepatitis B surface antibody (anti-HBs) > 10 IU/ml, of whom 55 (4.0%) were anti-HBc positive, suggesting that they had been infected with HBV in the past. Anti-HBc positive cases had past histories of hepatitis, either their own or their spouses'. Individuals with inadequate anti-HBs levels (< 10 IU/ml) were significantly more prevalent among anti-HBc positive cases (p < 0.001). CONCLUSIONS: The prevalence of blood-borne viruses among dental HCWs found in this study was lower than past reports from Iranian dentists and general population. The implementation of HBV vaccination together with improvement in infection control procedures has reduced the potential for risk infection among Iranian dentists.

HBV vaccination status and response to hepatitis B vaccine among Iranian dentists, correlation with risk factors and preventive measures.

BACKGROUND: Studies showed that HBV vaccination and consequent level of antibody are not completely adequate among dentists despite performance of highly exposure prone procedures. OBJECTIVES: The objectives of the study were to evaluate the levels of responsiveness to HBV vaccine and to determine the occupational factors associated among dental staff. MATERIALS AND METHODS: In total, 1612 dental health care workers were recruited. The level of anti-HBs was tested using a commercially enzyme-linked immunosorbent assay (ELISA). Data on demographic, risk factors associated with dental practice and level of protective procedures and occupational exposure aspects were collected through self-reported questionnaires. RESULTS: Of 1538 vaccinated individuals, 55 (3.7%), 126 (8.4%) and 1309 (87.9%) had received one, two and full three doses of vaccine, respectively. One-hundred-seventy-six (11.5%) were nonimmune (anti-HBs < 10 IU/mL) and 1362 (88.5%) were immune (anti-HBs > 10 IU/ mL). 392/542 (72.3%) of dentists who received their third dose of vaccination less than five years before the commencement of study were completely immune compared to those who had completed all three recommended doses in a longer period (308/491, 64.3%) (P = 0.001). Fifty-eight (3.59%) of participants did not receive any HBV vaccine at all; however, they had positive results for anti-HBs, indicating a past HBV infection. Statistically, the levels of anti-HBs were significantly associated with gender, age, duration of dental practice engagement and regularly use of mask, glasses and shield. CONCLUSIONS: Since dental care workers have a high risk of exposure to hepatitis virus, they should be advised to receive hepatitis B vaccine and it should be confirmed if they have acquired immunity to HBV by testing the level of anti-HBs.

Effect of Fluoxetine Consumption on Orthodontic Tooth Movement in Rats.

OBJECTIVES: Fluoxetine is a selective serotonin re-uptake inhibitor (SSRI) widely used for depression, bipolar disorder, anxiety and obsessive-compulsive disorder. The aim of this study was to assess the effect of fluoxetine on orthodontic tooth movement (OTM) in rats. MATERIALS AND METHODS: Forty-five male Wistar rats were randomly divided into three groups namely the control group (no medication), saline and fluoxetine dissolved in saline. In all groups, nickel titanium closed-coil spring was used between the left maxillary central incisor and first molar to exert 60g force at 2mm activation. Radiographs were taken at one and 21 days. After 21 days, the rats were sacrificed. The distance between the first and second molar teeth, optical density of bone, periodontal ligament (PDL) width, lacuna length and depth and number of osteoclasts were measured and compared among the groups. RESULTS: Tooth movement significantly increased in the fluoxetine group (P=0.005). No significant differences were found in osteoclast count (P=0.069). The PDL width in the mesioapical region of root was significantly different among the groups (P=0.015). Statistical analysis did not show significant differences in depth or length of lacunae in any examined part of the root (P>0.05). Bone densitometry results showed that in fluoxetine group, density of bone in all four areas (alveolar bone, hard palate, skull and mandibular bone) significantly decreased from day one to day 21 (P< 0.05). CONCLUSION: This study indicated that fluoxetine decreased bone density, which resulted in subsequently greater tooth movement in rats; however, further studies are needed on humans.

The effects of diode laser (660 nm) on the rate of tooth movements: an animal study.

Low-level laser has been indicated to have the capability to facilitate the differentiation of the osteoclastic and osteoblastic cells which are responsible for the bone remodeling process. The aim of this study was to evaluate the effects of InGaAlP laser with a wavelength of 660 nm on the rate of tooth movement and histological status. Thirty male Wistar rats of 7 weeks old were selected for this study. The rats were randomly divided into two groups of 15 each to form the experimental (laser-irradiated) and control (non-irradiated) groups. The control group received unilateral orthodontic appliance design (one quadrant), but the laser-irradiated group received split-mouth design, with orthodontic appliance on both sides and laser irradiation on one side only (group b) and on the contralateral side (group c). The orthodontic appliance consisted of a NiTi closed coil spring with a length of 5 mm which was ligated to maxillary molar and incisor. A total of 60 g of force was applied to the rat molar. The diode laser (660 nm) was irradiated with an output power of 25 mW in continuous mode for a total time of 5 min in the laser-irradiated group. After 14 days of orthodontic tooth movement, the amount of tooth movements was measured. In the laser-irradiated group, the amount of tooth movement was significantly greater than that of the non-irradiated group (2.3-fold), but there was no significant difference between the non-irradiated and indirectly irradiated groups. Histopathological studies revealed that the number of osteoclasts in the laser-irradiated group was significantly greater than that of the non-irradiated group (1.5-fold) while this number was almost the same in the non-irradiated and indirectly irradiated groups. The results suggested that low-level laser can accelerate the rate of bone remodeling. However, in order to utilize the low-level laser as an adjunct in orthodontic practice on patients, further research studies are needed for finding the appropriate dosage for the human tissues.

The effect of remin pro and MI paste plus on bleached enamel surface roughness.

OBJECTIVE: Increased number of adult patients requesting orthodontic treatment result in bonding bracket to ceramic restorations more than before. The aim of this study was to evaluate and compare the shear bond strength of orthodontic brackets bonded to two types of ceramic bases with conventional orthodontic bonding resin and a new nano-filled composite resin. MATERIALS AND METHODS: Twenty four feldespathic porcelain and 24 lithium disilicate ceramic disks were fabricated. All of the samples were conditioned by sandblasting, hydrofluoric acid and silane. Maxillary incisor metal brackets were bonded to half of the disks in each group by conventional orthodontic bonding resin and the other half bonded with a nano-filled composite. The samples then were thermocycled for 2000 cycle between 5-55° C. Shear bond strength was measured and the mode of failure was examined. Randomly selected samples were also evaluated by SEM. RESULTS: The lowest bond strength value was found infeldespathic ceramic bonded by nano-filled composite (p<0.05). There was not any statistically significant difference between other groups regarding bond strength. The mode of failure in the all groups except group 1 was cohesive and porcelain damages were detected. CONCLUSION: Since less damages to feldspathic porcelain was observed when the nano-filled composite was used to bond brackets, the use of nano-filled composite resins can be suggested for bonding brackets to feldspathic porcelain restorations.