A controlled nucleation and growth of Si nanowires by using a TiN diffusion barrier layer for lithium-ion batteries.

Uniform size of Si nanowires (NWs) is highly desirable to enhance the performance of Si NW-based lithium-ion batteries. To achieve a narrow size distribution of Si NWs, the formation of bulk-like Si structures such as islands and chunks needs to be inhibited during nucleation and growth of Si NWs. We developed a simple approach to control the nucleation of Si NWs via interfacial energy tuning between metal catalysts and substrates by introducing a conductive diffusion barrier. Owing to the high interfacial energy between Au and TiN, agglomeration of Au nanoparticle catalysts was restrained on a TiN layer which induced the formation of small Au nanoparticle catalysts on TiN-coated substrates. The resulting Au catalysts led to the nucleation and growth of Si NWs on the TiN layer with higher number density and direct integration of the Si NWs onto current collectors without the formation of bulk-like Si structures. The lithium-ion battery anodes based on Si NWs grown on TiN-coated current collectors showed improved specific gravimetric capacities (>30%) for various charging rates and enhanced capacity retention up to 500 cycles of charging-discharging.

Fabrication of a Microcavity Prepared by Remote Epitaxy over Monolayer Molybdenum Disulfide.

Advances in epitaxy have enabled the preparation of high-quality material architectures consisting of incommensurate components. Remote epitaxy based on lattice transparency of atomically thin graphene has been intensively studied for cost-effective advanced device manufacturing and heterostructure formation. However, remote epitaxy on nongraphene two-dimensional (2D) materials has rarely been studied even though it has a broad and immediate impact on various disciplines, such as many-body physics and the design of advanced devices. Herein, we report remote epitaxy of ZnO on monolayer MoS2 and the realization of a whispering-gallery-mode (WGM) cavity composed of a single crystalline ZnO nanorod and monolayer MoS2. Cross-sectional transmission electron microscopy and first-principles calculations revealed that the nongraphene 2D material interacted with overgrown and substrate layers and also exhibited lattice transparency. The WGM cavity embedding monolayer MoS2 showed enhanced luminescence of MoS2 and multimodal emission.

Enhanced nucleation of germanium on graphene via dipole engineering.

The preparation of crystalline materials on incommensurate substrates has been a key topic of epitaxy. van der Waals (vdW) epitaxy on two-dimensional (2D) materials opened novel opportunities of epitaxial growth overcoming the materials compatibility issue. Therefore, vdW epitaxy has been considered as a promising approach for the preparation of building blocks of flexible devices and thin film-based devices at the nano/microscale. However, an understanding of vdW epitaxy has not been thoroughly established. Especially, controlling nucleation during vdW epitaxy has not been achieved although nucleation in vdW epitaxy is suppressed due to the absence of surface dangling bonds on 2D materials. Here we show an enhancement of nucleation probability of germanium on graphene via introducing an out-of-plane dipole moment without any change in the chemical nature of graphene. A graphene/hexagonal boron nitride stack and transferred graphene on a polarized ferroelectric thin film were employed to demonstrate the significant enhancement of Ge nucleation on graphene. Theoretical calculations and chemical vapor deposition were employed to elucidate the effect of the out-of-plane dipole moment on nucleation in vdW epitaxy.

Solution-Processed n-Type Graphene Doping for Cathode in Inverted Polymer Light-Emitting Diodes.

n-Type doping with (4-(1,3-dimethyl-2,3-dihydro-1H-benzoimidazol-2-yl)phenyl) dimethylamine (N-DMBI) reduces a work function (WF) of graphene by ∼0.45 eV without significant reduction of optical transmittance. Solution process of N-DMBI on graphene provides effective n-type doping effect and air-stability at the same time. Although neutral N-DMBI act as an electron receptor leaving the graphene p-doped, radical N-DMBI acts as an electron donator leaving the graphene n-doped, which is demonstrated by density functional theory. We also verify the suitability of N-DMBI-doped n-type graphene for use as a cathode in inverted polymer light-emitting diodes (PLEDs) by using various analytical methods. Inverted PLEDs using a graphene cathode doped with N-DMBI radical showed dramatically improved device efficiency (∼13.8 cd/A) than did inverted PLEDs with pristine graphene (∼2.74 cd/A). N-DMBI-doped graphene can provide a practical way to produce graphene cathodes with low WF in various organic optoelectronics.

Design principles from multiscale simulations to predict nanostructure in self-assembling ionic liquids.

Molecular dynamics simulations (up to the nanoscale) were performed on the 3-methyl-1-pentylimidazolium ionic liquid cation paired with three anions; chloride, nitrate, and thiocyanate as aqueous mixtures, using the effective fragment potential (EFP) method, a computationally inexpensive way of modeling intermolecular interactions. The simulations provided insight (preferred geometries, radial distribution functions and theoretical proton NMR resonances) into the interactions within the ionic domain and are validated against 1H NMR spectroscopy and small- and wide-angle X-ray scattering experiments on 1-decyl-3-methylimidazolium. Ionic liquids containing thiocyanate typically resist gelation and form poorly ordered lamellar structures upon mixing with water. Conversely, chloride, a strongly coordinating anion, normally forms strong physical gels and produces well-ordered nanostructures adopting a variety of structural motifs over a very wide range of water compositions. Nitrate is intermediate in character, whereby upon dispersal in water it displays a range of viscosities and self-assembles into nanostructures with considerable variability in the fidelity of ordering and symmetry, as a function of water content in the binary mixtures. The observed changes in the macro and nanoscale characteristics were directly correlated to ionic domain structures and intermolecular interactions as theoretically predicted by the analysis of MD trajectories and calculated RDFs. Specifically, both chloride and nitrate are positioned in the plane of the cation. Anion to cation proximity is dependent on water content. Thiocyanate is more susceptible to water insertion into the second solvent shell. Experimental 1H NMR chemical shifts monitor the site-specific competition dependence with water content in the binary mixtures. Thiocyanate preferentially sits above and below the aromatic ring plane, a state disallowing interaction with the protons on the imidazolium ring.

Single crystalline ZnO radial homojunction light-emitting diodes fabricated by metalorganic chemical vapour deposition.

ZnO radial p-n junction architecture has the potential for forward-leap of light-emitting diode (LED) technology in terms of higher efficacy and economical production. We report on ZnO radial p-n junction-based light emitting diodes prepared by full metalorganic chemical vapour deposition (MOCVD) with hydrogen-assisted p-type doping approach. The p-type ZnO(P) thin films were prepared by MOCVD with the precursors of dimethylzinc, tert-butanol, and tertiarybutylphosphine. Controlling the precursor flow for dopant results in the systematic change of doping concentration, Hall mobility, and electrical conductivity. Moreover, the approach of hydrogen-assisted phosphorous doping in ZnO expands the understanding of doping behaviour in ZnO. Ultraviolet and visible electroluminescence of ZnO radial p-n junction was demonstrated through a combination of position-controlled nano/microwire and crystalline p-type ZnO(P) radial shell growth on the wires. The reported research opens a pathway of realisation of production-compatible ZnO p-n junction LEDs.

Charge transfer in crystalline germanium/monolayer MoS2 heterostructures prepared by chemical vapor deposition.

Heterostructuring provides novel opportunities for exploring emergent phenomena and applications by developing designed properties beyond those of homogeneous materials. Advances in nanoscience enable the preparation of heterostructures formed incommensurate materials. Two-dimensional (2D) materials, such as graphene and transition metal dichalcogenides, are of particular interest due to their distinct physical characteristics. Recently, 2D/2D heterostructures have opened up new research areas. However, other heterostructures such as 2D/three-dimensional (3D) materials have not been thoroughly studied yet although the growth of 3D materials on 2D materials creating 2D/3D heterostructures with exceptional carrier transport properties has been reported. Here we report a novel heterostructure composed of Ge and monolayer MoS2, prepared by chemical vapor deposition. A single crystalline Ge (110) thin film was grown on monolayer MoS2. The electrical characteristics of Ge and MoS2 in the Ge/MoS2 heterostructure were remarkably different from those of isolated Ge and MoS2. The field-effect conductivity type of the monolayer MoS2 is converted from n-type to p-type by growth of the Ge thin film on top of it. Undoped Ge on MoS2 is highly conducting. The observations can be explained by charge transfer in the heterostructure as opposed to chemical doping via the incorporation of impurities, based on our first-principles calculations.

Role of scaffold network in controlling strain and functionalities of nanocomposite films.

Strain is a novel approach to manipulating functionalities in correlated complex oxides. However, significant epitaxial strain can only be achieved in ultrathin layers. We show that, under direct lattice matching framework, large and uniform vertical strain up to 2% can be achieved to significantly modify the magnetic anisotropy, magnetism, and magnetotransport properties in heteroepitaxial nanoscaffold films, over a few hundred nanometers in thickness. Comprehensive designing principles of large vertical strain have been proposed. Phase-field simulations not only reveal the strain distribution but also suggest that the ultimate strain is related to the vertical interfacial area and interfacial dislocation density. By changing the nanoscaffold density and dimension, the strain and the magnetic properties can be tuned. The established correlation among the vertical interface-strain-properties in nanoscaffold films can consequently be used to tune other functionalities in a broad range of complex oxide films far beyond critical thickness.

Phonon Mode Transformation Across the Orthohombic-Tetragonal Phase Transition in a Lead Iodide Perovskite CH3NH3PbI3: A Terahertz Time-Domain Spectroscopy Approach.

We study the temperature-dependent phonon modes of the organometallic lead iodide perovskite CH3NH3PbI3 thin film across the terahertz (0.5-3 THz) and temperature (20-300 K) ranges. These modes are related to the vibration of the Pb-I bonds. We found that two phonon modes in the tetragonal phase at room temperature split into four modes in the low-temperature orthorhombic phase. By use of the Lorentz model fitting, we analyze the critical behavior of this phase transition. The carrier mobility values calculated from the low-temperature phonon mode frequencies, via two theoretical approaches, are found to agree reasonably with the experimental value (∼2000 cm(2) V(-1) s(-1)) from a previous time-resolved THz spectroscopy work. Thus, we have established a possible link between terahertz phonon modes and the transport properties of perovskite-based solar cells.

First-Principles Investigation of Nanopore Sequencing Using Variable Voltage Bias on Graphene-Based Nanoribbons.

In this study, we examine the mechanism of nanopore-based DNA sequencing using a voltage bias across a graphene nanoribbon. Using density function theory and a nonequilibrium Green's function approach, we determine the transmission spectra and current profile for adenine, guanine, cytosine, thymine, and uracil as a function of bias voltage in an energy minimized configuration. Utilizing the transmission current, we provide a general methodology for the development of a three nanopore graphene-based device that can be used to distinguish between the various nucleobases for DNA/RNA sequencing. From our analysis, we deduce that it is possible to use different transverse currents across a multinanopore device to differentiate between nucleobases using various voltages of 0.5, 1.3, and 1.6 V. Overall, our goal is to improve nanopore design to further DNA/RNA nucleobase sequencing and biomolecule identification techniques.

Proximity-induced magnetism in transition-metal substituted graphene.

We investigate the interactions between two identical magnetic impurities substituted into a graphene superlattice. Using a first-principles approach, we calculate the electronic and magnetic properties for transition-metal substituted graphene systems with varying spatial separation. These calculations are compared for three different magnetic impurities, manganese, chromium, and vanadium. We determine the electronic band structure, density of states, and Millikan populations (magnetic moment) for each atom, as well as calculate the exchange parameter between the two magnetic atoms as a function of spatial separation. We find that the presence of magnetic impurities establishes a distinct magnetic moment in the graphene lattice, where the interactions are highly dependent on the spatial and magnetic characteristic between the magnetic and carbon atoms, which leads to either ferromagnetic or antiferromagnetic behavior. Furthermore, through an analysis of the calculated exchange energies and partial density of states, it is determined that interactions between the magnetic atoms can be classified as an RKKY interaction.

Real-space multiple-scattering Hubbard model calculations for d- and f-state materials.

Calculations are presented of the electronic structure and X-ray spectra of materials with correlated d- and f-electron states based on the Hubbard model, a real-space multiple-scattering formalism and a rotationally invariant local density approximation. Values of the Hubbard parameter are calculated ab initio using the constrained random-phase approximation. The combination of the real-space Green's function with Hubbard model corrections provides an efficient approach to describe localized correlated electron states in these systems, and their effect on core-level X-ray spectra. Results are presented for the projected density of states and X-ray absorption spectra for transition metal- and lanthanide-oxides. Results are found to be in good agreement with experiment.

Thermoelectric Properties of Nano-Meso-Micro ß-MnO2 Powders as a Function of Electrical Resistance.

Particle sizes of manganese oxide (ß-MnO2) powders were modified by using a mortar and pestle ground method for period of times that varied between 15-60 min. Particle size versus ground time clearly shows the existence of a size-induced regime transition (i.e., regime I and II). Thermoelectric properties of ß-MnO2 powders as a function of electrical resistance in the range of R P = 10 - 80Ω were measured. Based on the data presented, we propose a model for the ß-MnO2 system in which nanometer-scale MnO2 crystallites bond together through weak van der Waals forces to form larger conglomerates that span in size from nanometer to micrometer scale.

Death Associated Protein Kinase (DAPK) -mediated neurodegenerative mechanisms in nematode excitotoxicity.

BACKGROUND: Excitotoxicity (the toxic overstimulation of neurons by the excitatory transmitter Glutamate) is a central process in widespread neurodegenerative conditions such as brain ischemia and chronic neurological diseases. Many mechanisms have been suggested to mediate excitotoxicity, but their significance across diverse excitotoxic scenarios remains unclear. Death Associated Protein Kinase (DAPK), a critical molecular switch that controls a range of key signaling and cell death pathways, has been suggested to have an important role in excitotoxicity. However, the molecular mechanism by which DAPK exerts its effect is controversial. A few distinct mechanisms have been suggested by single (sometimes contradicting) studies, and a larger array of potential mechanisms is implicated by the extensive interactome of DAPK. RESULTS: Here we analyze a well-characterized model of excitotoxicity in the nematode C. elegans to show that DAPK is an important mediator of excitotoxic neurodegeneration across a large evolutionary distance. We further show that some proposed mechanisms of DAPK's action (modulation of synaptic strength, involvement of the DANGER-related protein MAB-21, and autophagy) do not have a major role in nematode excitotoxicity. In contrast, Pin1/PINN-1 (a DAPK interaction-partner and a peptidyl-prolyl isomerase involved in chronic neurodegenerative conditions) suppresses neurodegeneration in our excitotoxicity model. CONCLUSIONS: Our studies highlight the prominence of DAPK and Pin1/PINN-1 as conserved mediators of cell death processes in diverse scenarios of neurodegeneration.

Correlation dynamics and enhanced signals for the identification of serial biomolecules and DNA bases.

Nanopore-based sequencing has demonstrated a significant potential for the development of fast, accurate, and cost-efficient fingerprinting techniques for next generation molecular detection and sequencing. We propose a specific multilayered graphene-based nanopore device architecture for the recognition of single biomolecules. Molecular detection and analysis can be accomplished through the detection of transverse currents as the molecule or DNA base translocates through the nanopore. To increase the overall signal-to-noise ratio and the accuracy, we implement a new 'multi-point cross-correlation' technique for identification of DNA bases or other molecules on the single molecular level. We demonstrate that the cross-correlations between each nanopore will greatly enhance the transverse current signal for each molecule. We implement first-principles transport calculations for DNA bases surveyed across a multilayered graphene nanopore system to illustrate the advantages of the proposed geometry. A time-series analysis of the cross-correlation functions illustrates the potential of this method for enhancing the signal-to-noise ratio. This work constitutes a significant step forward in facilitating fingerprinting of single biomolecules using solid state technology.

Next-Generation Epigenetic Detection Technique: Identifying Methylated Cytosine Using Graphene Nanopore.

DNA methylation plays a pivotal role in the genetic evolution of both embryonic and adult cells. For adult somatic cells, the location and dynamics of methylation have been very precisely pinned down with the 5-cytosine markers on cytosine-phosphate-guanine (CpG) units. Unusual methylation on CpG islands is identified as one of the prime causes for silencing the tumor suppressant genes. Early detection of methylation changes can diagnose the potentially harmful oncogenic evolution of cells and provide promising guideline for cancer prevention. With this motivation, we propose a cytosine methylation detection technique. Our hypothesis is that electronic signatures of DNA acquired as a molecule translocates through a nanopore would be significantly different for methylated and nonmethylated bases. This difference in electronic fingerprints would allow for reliable real-time differentiation of methylated DNA. We calculate transport currents through a punctured graphene membrane while the cytosine and methylated cytosine translocate through the nanopore. We also calculate the transport properties for uracil and cyanocytosine for comparison. Our calculations of transmission, current, and tunneling conductance show distinct signatures in their spectrum for each molecular type. Thus, in this work, we provide a theoretical analysis that points to a viability of our hypothesis.

Electronic fingerprints of DNA bases on graphene.

We calculate the electronic local density of states (LDOS) of DNA nucleotide bases (A,C,G,T), deposited on graphene. We observe significant base-dependent features in the LDOS in an energy range within a few electronvolts of the Fermi level. These features can serve as electronic fingerprints for the identification of individual bases in scanning tunneling spectroscopy (STS) experiments that perform image and site dependent spectroscopy on biomolecules. Thus the fingerprints of DNA-graphene hybrid structures may provide an alternative route to DNA sequencing using STS.