RESUMO
We present a low coherent hybrid detection technique for the differential model delay (DMD) measurement of a conventional optical multimode fiber with a modified Mach-Zehnder interferometer. A low coherent hybrid detection technique enhances mode coupling between guided modes and the reference mode to easily resolve the modal distribution. An optical spectrum analyzer and a broadband source were used to obtain time-resolved optical beat signals. The measured interference signal was Fourier transformed to obtain time-delay information. A scanning offset launching method was used to excite every available mode in a multimode fiber (MMF). Measurements of a conventional 8-m-long MMF demonstrated the validity of our proposed method. The experimental results of our proposed method agree well with results obtained using a conventional time domain measurement method. Our proposed method can be used to measure the DMD in a short length of optical MMF with a temporal resolution better than 0.72 ps when using an 8-m-long single-mode fiber as a reference.
Assuntos
Análise de Falha de Equipamento/instrumentação , Análise de Falha de Equipamento/métodos , Tecnologia de Fibra Óptica/instrumentação , Tomografia de Coerência Óptica/instrumentação , Desenho de Equipamento , Fibras Ópticas , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Fatores de Tempo , Tomografia de Coerência Óptica/métodosRESUMO
A novel differential mode delay (DMD) measurement technique for a multimode optical fiber based on optical frequency domain reflectometry (OFDR) has been proposed. We have obtained a high-resolution DMD value of 0.054 ps/m for a commercial multimode optical fiber with length of 50 m by using a modified OFDR in a Mach-Zehnder interferometer structure with a tunable external cavity laser and a Mach-Zehnder interferometer instead of Michelson interferometer. We have also compared the OFDR measurement results with those obtained using a traditional time-domain measurement method. DMD resolution with our proposed OFDR technique is more than an order of magnitude better than a result obtainable with a conventional time-domain method.
RESUMO
We observed residual stress relaxation by CO(2) laser irradiation in the cores of optical fibers by direct stress measurement. It was demonstrated that the mechanical stress was fully relaxed by CO(2) laser irradiation and that the remaining stress in the core was thermal stress that was due to a mismatch of the thermal expansion coefficients of the fiber core and cladding. The net core stresses after relaxation were 17, 68, and 203 MPa in Ge-B-codoped fibers drawn at 0.53, 1.38, and 3.48 N, respectively. Changes in the refractive indices of the cores as a result of residual stress relaxation were also estimated.