Stretchable Semiconducting Polymers with Hydrogen-Bonding-Capable Conjugation Breakers: Synthesis and Application in Organic Thin-Film Transistors.

Diketopyrrolopyrrole (DPP)-based conjugated copolymers are important organic semiconductors for applications in high-efficiency organic thin-film transistors (OTFTs). However, the direct application of these polymers with rigid backbones in stretchable devices has limitations. In this study, we designed and synthesized three kinds of DPPBT-based copolymers, DPPBT-A1, DPPBT-A3, and DPPBT-A5, which have amide-coupled alkylene conjugation breakers capable of hydrogen bonding. Linkers with different segment lengths were copolymerized with DPP and bithiophene (BT) backbone units. A DPP-based copolymer with alternating BT moieties, DPPBT, was synthesized as a reference fully conjugated copolymer. The synthesized polymers with freely rotational backbone linkers have sufficient flexibility to develop ordered phase domains, even in thin films, in comparison to the reference copolymer. However, the introduction of the conjugation breakers, which disconnect the intramolecular π-π overlapping, tends to decrease the hole mobility (µ) from 0.76 to 0.20 cm2 V-1 s-1 in the corresponding OTFT devices. The TFT fabricated using DPPBT-A3 showed a mobility of 0.50 cm2 V-1 s-1, and the mobility value did not show a significant change even when elongated by more than 50%. Therefore, the molecular design strategy of introducing amide-coupled alkylene conjugation breakers into conjugated polymer chains can contribute significantly to the development of high-mobility stretchable conjugated polymers in future.

Interfacial Capillary Spooling of Conductive Polyurethane-Silver Core-Sheath (PU@Ag) Microfibers for Highly Stretchable Interconnects.

Conductive fibers are core materials in textile electronics for the sustainable operation of devices under mechanical stimuli. Conventional polymer-metal core-sheath fibers were employed as stretchable electrical interconnects. However, their electrical conductivity is severely degraded by the rupture of metal sheaths at low strains. Because the core-sheath fibers are not intrinsically stretchable, designing a stretchable architecture of interconnects based on the fibers is essential. Herein, we introduce nonvolatile droplet-conductive microfiber arrays as stretchable interconnects by employing interfacial capillary spooling, motivated by the reversible spooling of capture threads in a spider web. Polyurethane (PU)-Ag core-sheath (PU@Ag) fibers were prepared by wet-spinning and thermal evaporation. When the fiber was placed on a silicone droplet, a capillary force was generated at their interface. The highly soft PU@Ag fibers were fully spooled within the droplet and reversibly uncoiled when a tensile force was applied. Without mechanical failures of the Ag sheaths, an excellent conductivity of 3.9 × 104 S cm-1 was retained at a strain of 1200% for 1000 spooling-uncoiling cycles. A light-emitting diode connected to a multiarray of droplet-PU@Ag fibers exhibited stable operation during spooling-uncoiling cycles.