Electroreductive Desulfurative Transformations with Thioethers as Alkyl Radical Precursors.

Thioethers are highly prevalent functional groups in organic compounds of natural and synthetic origin but remain remarkably underexplored as starting materials in desulfurative transformations. As such, new synthetic methods are highly desirable to unlock the potential of the compound class. In this vein, electrochemistry is an ideal tool to enable new reactivity and selectivity under mild conditions. Herein, we demonstrate the efficient use of aryl alkyl thioethers as alkyl radical precursors in electroreductive transformations, along with mechanistic details. The transformations proceed with complete selectivity for C(sp3 )-S bond cleavage, orthogonal to that of established transition metal-catalyzed two-electron routes. We showcase a hydrodesulfurization protocol with broad functional group tolerance, the first example of desulfurative C(sp3 )-C(sp3 ) bond formation in Giese-type cross-coupling and the first protocol for electrocarboxylation of synthetic relevance with thioethers as starting materials. Finally, the compound class is shown to outcompete their well-established sulfone analogues as alkyl radical precursors, demonstrating their synthetic potential for future desulfurative transformations in a one-electron manifold.

Spectroscopy, molecular structure, and electropolymerization of Ni(II) and Cu(II) complexes containing a thiophene-appending fluorinated Schiff base ligand.

In this contribution, we describe the preparation, characterization, and electrochemical behavior of a series of four new mononuclear M(II) complexes featuring a symmetric substituted N2O2-tetradentate Schiff base ligand, bearing either trifluoromethyl and p-bromophenyl (M = Ni, 3; Cu, 4) or trifluoromethyl and the π-extended p-(2-thienyl)phenylene (M = Ni, 5; Cu, 6) substituents. Complexes 3 and 4 were readily synthesized by reacting the diprotic fluorinated Schiff base proligand 2 with the appropriate hydrated metal(II) acetates, whereas 5 and 6 were obtained upon Stille cross-coupling reaction of 3 and 4 with 2-(tributylstannyl)-thiophene, respectively. Compounds 3-6 were isolated as neutral, air, and thermally stable-coloured solids, with yields ranging from 60 to 80%. The four complexes, the diimine precursor 1 and its trifluoroacetylated derivative 2, were identified using analytical (EA, ESI-MS), spectroscopic (IR, 1H, 13C, and 19F NMR), and X-ray crystallographic methods. X-ray crystal structure determination of complexes 3-5 revealed that both four-coordinate Ni(II) and Cu(II) metal ions adopt a square planar geometry. The magnetic properties of powdered samples of the Cu(II) derivatives 4 and 6 have been investigated (2-300 K) and found consistent in both cases with a single isolated copper(II) ion (s = 1/2). DFT calculations were used to examine the optimal geometries of complexes 5 and 6, allowing for a consistent perspective of their structure and characteristics. The primary aspects of the UV-vis spectra were interpreted using TD-DFT computations. Finally, electrochemical data indicate that complexes 5 and 6 polymerize at high anodic potentials in acetonitrile (greater than 2.0 V vs. Ag/AgCl). Cyclic voltammetry, scanning electron microscopy, and energy-dispersive X-ray spectroscopy (SEM-EDS) analyses were used to characterize the obtained films poly-5 and poly-6.

On-nanoparticle monolayers as a solute-specific, solvent-like phase.

In addition to modifying surface properties, self-assembled monolayers, SAMs, on nanoparticles can selectively incorporate small molecules from the surrounding solution. This selectivity has been used in the design of substrate-specific catalytic systems but its degree has not been quantified. This work uses catalytic centers embedded in on-nanoparticle hydrophobic SAMs to monitor and quantify the partitioning of molecules between the bulk solvent and these monolayers. A combination of experiments and theory allows us to relate the logarithm of the incorporation-into-SAM constant to the "bulk" log P values, characterizing the incoming substrates. These results are in line with classic, semi-empirical linear free energy relationships between partitioning solvent systems; in this way, they substantiate the view of nanoscopic on-particle SAMs acting akin to a bulk solvent phase.

Proving Cooperativity of a Catalytic Reaction by Means of Nanoscale Geometry: The Case of Click Reaction.

Establishing whether a reaction is catalyzed by a single-metal catalytic center or cooperatively by a fleeting complex encompassing two such centers may be an arduous pursuit requiring detailed kinetic, isotopic, and other types of studies─as illustrated, for instance, by over a decade-long work on single-copper versus di-copper mechanisms of the popular "click" reaction. This paper describes a method to interrogate such cooperative mechanisms by a nanoparticle-based platform in which the probabilities of catalytic units being proximal can be varied systematically and, more importantly, independently of their volume concentration. The method relies on geometrical considerations rather than a detailed knowledge of kinetic equations, yet the scaling trends it yield can distinguish between cooperative and non-cooperative mechanisms.

Stereoelectronically-induced allosteric binding: shape complementarity promotes positive cooperativity in fullerene/buckybowl complexes.

A novel 2 : 1 host-guest complex forms between 8-tert-butyl-6b2-azapenta-benzo[bc,ef,hi,kl,no]corannulene (1) and C60 with positive cooperativity (α = 2.56) and high affinity (K1 × K2 = 2.8 × 106 M-2) at 25 °C. The C60 undergoes increasing shape complementarity toward 1 throughout the binding process.

Fluorescent Polymers Conspectus.

The development of luminescent materials is critical to humankind. The Nobel Prizes awarded in 2008 and 2010 for research on the development of green fluorescent proteins and super-resolved fluorescence imaging are proof of this (2014). Fluorescent probes, smart polymer machines, fluorescent chemosensors, fluorescence molecular thermometers, fluorescent imaging, drug delivery carriers, and other applications make fluorescent polymers (FPs) exciting materials. Two major branches can be distinguished in the field: (1) macromolecules with fluorophores in their structure and (2) aggregation-induced emission (AIE) FPs. In the first, the polymer (which may be conjugated) contains a fluorophore, conferring photoluminescent properties to the final material, offering tunable structures, robust mechanical properties, and low detection limits in sensing applications when compared to small-molecule or inorganic luminescent materials. In the latter, AIE FPs use a novel mode of fluorescence dependent on the aggregation state. AIE FP intra- and intermolecular interactions confer synergistic effects, improving their properties and performance over small molecules aggregation-induced, emission-based fluorescent materials (AIEgens). Despite their outstanding advantages (over classic polymers) of high emission efficiency, signal amplification, good processability, and multiple functionalization, AIE polymers have received less attention. This review examines some of the most significant advances in the broad field of FPs over the last six years, concluding with a general outlook and discussion of future challenges to promote advancements in these promising materials that can serve as a springboard for future innovation in the field.

An Electrocatalytic Reaction As a Basis for Chemical Computing in Water Droplets.

Aqueous droplets covered with amphiphilic Janus Au/Fe3O4 nanoparticles and suspended in an organic phase serve as building blocks of droplet-based electronic circuitry. The electrocatalytic activity of these nanoparticles in a hydrogen evolution reaction (HER) underlies the droplet's ability to rectify currents with typical rectification ratios of ∼10. In effect, individual droplets act as low-frequency half-wave rectifiers, whereas several appropriately wired droplets enable full-wave rectification. When the HER-supporting droplets are combined with salt-containing "resistor" ones, the resulting ensembles can act as AND or OR gates or as inverters.

Mixed-Charge Nanocarriers Allow for Selective Targeting of Mitochondria by Otherwise Nonselective Dyes.

Targeted delivery of molecular cargos to specific organelles is of paramount importance for developing precise and effective therapeutics and imaging probes. This work describes a disulfide-based delivery method in which mixed-charged nanoparticles traveling through the endolysosomal tract deliver noncovalently bound dye molecules selectively into mitochondria. This system comprises three elements: (1) The nanoparticles deliver their payloads by a kiss-and-go mechanism - that is, they drop off their dye cargos proximate to mitochondria but do not localize therein; (2) the dye molecules are by themselves nonspecific to any cellular structures but become so with the help of mixed-charge nanocarriers; and (3) the dye is engineered in such a way as to remain in mitochondria for a long time, up to days, allowing for observing dynamic remodeling of mitochondrial networks and long-term tracking of mitochondria even in dividing cells. The selectivity of delivery and long-lasting staining derive from the ability to engineer charge-imbalanced, mixed [+/-] on-particle monolayers and from the structural features of the cargo. Regarding the former, the balance of [+] and [-] ligands can be adjusted to limit cytotoxicity and control the number of dye molecules adsorbed onto the particles' surfaces. Regarding the latter, comparative studies with multiple dye derivatives we synthesized rationalize the importance of polar groups, long alkyl chains, and disulfide moieties in the assembly of fluorescent nanoconstructs and long-lasting staining of mitochondria. Overall, this strategy could be useful for delivering hydrophilic and/or anionic small-molecule drugs difficult to target to mitochondria by classical approaches.

On-Nanoparticle Gating Units Render an Ordinary Catalyst Substrate- and Site-Selective.

When an organometallic catalyst is tethered onto a nanoparticle and is embedded in a monolayer of longer ligands terminated in "gating" end-groups, these groups can control the access and orientation of the incoming substrates. In this way, a nonspecific catalyst can become enzyme-like: it can select only certain substrates from substrate mixtures and, quite remarkably, can also preorganize these substrates such that only some of their otherwise equivalent sites react. For a simple, copper-based click reaction catalyst and for gating ligands terminated in charged groups, both substrate- and site-selectivities are on the order of 100, which is all the more notable given the relative simplicity of the on-particle monolayers compared to the intricacy of enzymes' active sites. The strategy of self-assembling macromolecular, on-nanoparticle environments to enhance selectivities of "ordinary" catalysts presented here is extendable to other types of catalysts and gating based on electrostatics, hydrophobicity, and chirality, or the combinations of these effects. Rational design of such systems should be guided by theoretical models we also describe.

Cyclic (Aryl)(Amido)Carbenes: NHCs with Triplet-like Reactivity.

The synthesis and study of a library of cyclic (aryl)(amido)carbenes (CArAmCs), which represent a class of electrophilic NHCs that feature low calculated singlet-triplet gaps (ΔEST =19.9 kcal mol-1 ; B3LYP/def2-TZVP) and exhibit reactivity profiles expected from triplet carbenes, are described. The electrophilic properties of the CArAmCs were quantified by analyzing their respective selenium adducts, which exhibited the largest downfield 77 Se NMR chemical shifts (up to 1645 ppm) measured for any NHC derivative known to date, as well as their Ir carbonyl complexes, from which large Tolman electronic parameter (TEP) values (up to 2064 cm-1 ) were ascertained. The CArAmCs were found to engage in reactions that are typically observed with triplet carbenes, including C-H insertions, [2+1] cycloadditions with alkenes as well as alkynes, and spontaneous oxidation upon exposure to oxygen.

Redox- and light-switchable N-heterocyclic carbenes: a "soup-to-nuts" course on contemporary structure-activity relationships.

Switchable catalysts respond to various types of stimuli in a manner that results in distinct structural or electronic changes. When each state exhibits a different activity, selectivity, or solubility, the corresponding catalyst may be used to control chemical reactions in a temporally- or spatially-resolved fashion. N-Heterocyclic carbenes (NHCs) are versatile scaffolds for building switchable catalysts and many examples that respond to changes in electrochemical potential or light have been introduced. Such types of switchable NHCs will be described in this Feature Article. The accompanying discussions include design considerations, characterization methodology, quantification of the underlying switching phenomena, and utility in catalytic applications. Challenges for the field as well as perspectives on potential opportunities for future development are also provided.

Estrogenoterapia en pacientes postoperadas de cáncer ginecológico / Estrogentherapy in patients with operations for gynecological cancer

La ooforectomía bilateral es parte necesaria en el tratamiento de los tumores ginecológicos localmente avanzados; así como secuencia rutinaria al realizar histerectomía en mujeres perimenopáusicas o postmenopáusicas para prevenir una neoplasia anexial. En el presente estudio se revisó la experiencia de varios autores en la terapia hormonal con estrógenos y así valorar el riesgo-beneficio de la terapia sustitutiva en el manejo de la enfermedad coronaria, osteoporosis en pacientes con antecedentes de cáncer mamario y/o de ovario en la mujer joven con necesidad de estrógenos