A photoelectrochemical aptasensor for the sensitive detection of streptomycin based on a TiO2/BiOI/BiOBr heterostructure.

In photoelectrochemical sensor (PEC sensor), sensitivity and selectivity are two essential factors which are determined by photosensitive of materials and identification of elements. Herein, a novel PEC aptamer sensor for streptomycin-specific detection was developed, with which the visible-light-active TiO2/BiOI/BiOBr heterostructure and aptamers were employed as photoactive material and bio-identification elements, separately. The combination of an appropriate amount of TiO2 with BiOI/BiOBr enhanced the photocurrent response, and thus is beneficial to the construction of PEC sensors. In addition, the one-pot synthesis of TiO2/BiOI/BiOBr has the advantage of being environmentally-friendly. Under optimized conditions, the photocurrent response of aptamer/TiO2/BiOI/BiOBr/ITO is linear with SRT concentration from 0.05 to 150 nM, and the detection limit (S/N = 3) is as low as 0.04 nM. This novel PEC sensing strategy provided an ultra-sensitive sensor with high selectivity and stability for SRT detection.

Electrochemiluminescence aptasensor for multiple determination of Hg2+ and Pb2+ ions by using the MIL-53(Al)@CdTe-PEI modified electrode.

An aptasensor based on MIL-53(Al)@CdTe was designed for multiple determination of Hg2+ and Pb2+ by electrochemiluminescence (ECL). Upon the recognition of Hg2+, aptamer 2-AuNPs form hairpin structures and are removed from the electrode. While in the presence of Pb2+, aptamer 1-PtNPs capture the target ions and form G-quadruplexes, and then bring PtNPs close enough to CdTe QDs to produce ECL resonance energy transfer. Upon aptamer interaction with Hg2+ and Pb2+, decreased ECL intensity was observed due to enhanced resonance energy transfer (ERET) and attenuated surface plasmon resonance (SPR). The ECL intensity difference (ΔECL) could therefore be used to detect heavy-metal ions with detection limits of 4.1 × 10-12 M (path 1, Hg2+), 3.7 × 10-11 M (path 2, Pb2+), and 2.4 × 10-11 M (path 3, Pb2+). The aptasensor could also be used for detecting Hg2+ and Pb2+ in fish and shrimp samples with good recoveries.

Electrochemiluminecence nanogears aptasensor based on MIL-53(Fe)@CdS for multiplexed detection of kanamycin and neomycin.

A dual gears electrochemiluminecence (ECL) aptasensing strategy for multiple selective determination of kanamycin and neocycin was designed on the basis of the combination of kanamycin and neocycin induced dual gears conversion, the loading platform of metal-organic frameworks (MOFs), surface plasmon resonance (SPR) and ECL resonance energy transfer (ERET) between CdS QDs and AuNPs (or PtNPs). In the absence of target, the dual gears were "off". Then the B1-AuNP (gear B) and aptamer 1-PtNPs acted as signal quenching elements to quench ECL intensity due to ERET process. Upon addition of kanamycin, the aptamer 1-PtNPs were removed from the gear gradually, the ECL was enhanced due to SPR process between AuNPs and CdS QDs. After the incubation of aptamer 2, the dual gears were "off" again and ECL intensity was decreased by ERET process between AuNPs and CdS QDs. In the presence of neomycin, dual gears were "on" again, the ECL signal was enhanced by SPR process between AuNPs and CdS QDs. Under optimal condition, the proposed aptasensor exhibited wide linear ranges of kanamycin (10-10-10-6 M) and neomycin (10-9-10-5 M), and relatively low detection limits to kanamycin (1.7 × 10-11 M) and neomycin (3.5 × 10-10 M). The developed aptasensor realized the multiple ECL detection of kanamycin and neomycin with single luminophore, and was successfully applied to the detection of kanamycin and neomycin in food samples.