Reversing the circulation of ferromagnetic nanodisks with a local circular magnetic field.

Ferromagnetic nanodisks have a unique closed-flux vortex state with two degrees of freedom that results in four different magnetization states that are degenerate in energy and stable against thermal fluctuations. Such disks could be interesting for magnetic memory devices if the independent switching of each degree of freedom can be realized. Polarity switching of the vortex core has been demonstrated, but it is difficult to manipulate switching of the vortex due to the high symmetry of the structure. In this work, we reverse the circulation direction of a circular ferromagnetic nanodisk by applying a local circular Oersted field via a metallic atomic force microscope tip placed at the center of the disk. The resulting field reverses the circulation of the vortex without switching the orientation of the core. Switching of the vortex is accomplished by the sudden increase in the current that occurs when there is dielectric breakdown of a thin insulating layer on top of the disk. Micromagnetic simulations indicate that a line current concentrated in the center of a nanodisk can reverse the magnetization of the disk at a value over one order of magnitude smaller than the current required if the current is instead uniformly distributed across the cross section of disk. These results can be applied to reducing the switching current in circularly symmetric device structures.

Characterizing pilus-mediated adhesion of biofilm-forming E. coli to chemically diverse surfaces using atomic force microscopy.

Biofilms are complex communities of microorganisms living together at an interface. Because biofilms are often associated with contamination and infection, it is critical to understand how bacterial cells adhere to surfaces in the early stages of biofilm formation. Even harmless commensal Escherichia coli naturally forms biofilms in the human digestive tract by adhering to epithelial cells, a trait that presents major concerns in the case of pathogenic E. coli strains. The laboratory strain E. coli ZK1056 provides an intriguing model system for pathogenic E. coli strains because it forms biofilms robustly on a wide range of surfaces.E. coli ZK1056 cells spontaneously form living biofilms on polylysine-coated AFM cantilevers, allowing us to measure quantitatively by AFM the adhesion between native biofilm cells and substrates of our choice. We use these biofilm-covered cantilevers to probe E. coli ZK1056 adhesion to five substrates with distinct and well-characterized surface chemistries, including fluorinated, amine-terminated, and PEG-like monolayers, as well as unmodified silicon wafer and mica. Notably, after only 0-10 s of contact time, the biofilms adhere strongly to fluorinated and amine-terminated monolayers as well as to mica and weakly to "antifouling" PEG monolayers, despite the wide variation in hydrophobicity and charge of these substrates. In each case the AFM retraction curves display distinct adhesion profiles in terms of both force and distance, highlighting the cells' ability to adapt their adhesive properties to disparate surfaces. Specific inhibition of the pilus protein FimH by a nonhydrolyzable mannose analogue leads to diminished adhesion in all cases, demonstrating the critical role of type I pili in adhesion by this strain to surfaces bearing widely different functional groups. The strong and adaptable binding of FimH to diverse surfaces has unexpected implications for the design of antifouling surfaces and antiadhesion therapies.

Contact printing of colloidal nanocrystal thin films for hybrid organic/quantum dot optoelectronic devices.

Novel thin film optoelectronic devices containing both inorganic colloidal semiconductor quantum dots (QDs) and organic semiconductor thin films have been widely investigated in recent years for a variety of applications. Here, we review one of the most versatile and successful methods developed to integrate these two dissimilar material classes into a functional multilayered device: contact printing of colloidal QD films. Experimental details regarding the contact printing process are outlined, and the key advantages of this QD deposition method over other commonly encountered techniques are discussed. The use of tapping mode atomic force microscopy (AFM) to effectively characterize QD film morphology both on an elastomeric stamp (before contact printing) and as-transferred to the organic semiconductor receiving film (after contact printing) is also described. Finally, we offer suggestions for future efforts directed toward the goal of rapid, continuous QD deposition over larger substrates for the advancement of hybrid optoelectronic thin film devices.

Detection of charge storage on molecular thin films of tris(8-hydroxyquinoline) aluminum (Alq3) by Kelvin force microscopy: a candidate system for high storage capacity memory cells.

Retention and diffusion of charge in tris(8-hydroxyquinoline) aluminum (Alq(3)) molecular thin films are investigated by injecting electrons and holes via a biased conductive atomic force microscopy tip into the Alq(3) films. After the charge injection, Kelvin force microscopy measurements reveal minimal changes with time in the spatial extent of the trapped charge domains within Alq(3) films, even for high hole and electron densities of >10(12) cm(-2). We show that this finding is consistent with the very low mobility of charge carriers in Alq(3) thin films (<10(-7) cm(2)/(Vs)) and that it can benefit from the use of Alq(3) films as nanosegmented floating gates in flash memory cells. Memory capacitors using Alq(3) molecules as the floating gate are fabricated and measured, showing durability over more than 10(4) program/erase cycles and the hysteresis window of up to 7.8 V, corresponding to stored charge densities as high as 5.4 × 10(13) cm(-2). These results demonstrate the potential for use of molecular films in high storage capacity nonvolatile memory cells.

Patterned removal of molecular organic films by diffusion.

We demonstrate that "contact patterning" subtractively patterns a wide range of molecular organic films of nanoscale thickness with nanometer-scale accuracy. In "contact patterning", an elastomeric stamp with raised features is brought into contact with the organic film and subsequently removed, generating patterns by the diffusion of the film molecules into the stamp. The mechanism of material removal via diffusion is documented over spans of minutes, hours, and days and is shown to be consistently repeatable. Contact patterning provides a photolithography-free, potentially scalable approach to subtractive patterning of a wide range of molecular organic films.

Nanoscale morphology revealed at the interface between colloidal quantum dots and organic semiconductor films.

The degree of interpenetration at the interface between colloidal quantum dots (QDs) and organic semiconductor molecules commonly employed in hybrid light-emitting devices (QD-LEDs) has been examined using tapping-mode atomic force microscopy. Both phase separation-driven and Contact Printing-enabled QD/semiconductor heterojunction fabrication methodologies lead to significant QD embedment in the underlying organic film with the greatest degree of QD penetration observed for QD monolayers that have been contact printed. The relative performance of QD-LEDs fabricated via three different methods using the same materials set has also been investigated.

Quantitative changes in the elasticity and adhesive properties of Escherichia coli ZK1056 prey cells during predation by bdellovibrio bacteriovorus 109J.

Atomic force microscopy (AFM) was used to explore the changes that occur in Escherichia coli ZK1056 prey cells while they are being consumed by the bacterial predator Bdellovibrio bacteriovorus 109J. Invaded prey cells, called bdelloplasts, undergo substantial chemical and physical changes that can be directly probed by AFM. In this work, we probe the elasticity and adhesive properties of uninvaded prey cells and bdelloplasts in a completely native state in dilute aqueous buffer without chemical fixation. Under these conditions, the rounded bdelloplasts were shown to be shorter than uninvaded prey cells. More interestingly, the extension portions of force curves taken on both kinds of cells clearly demonstrate that bdelloplasts are softer than uninvaded prey cells, reflecting a decrease in bdelloplast elasticity after invasion by Bdellovibrio predators. On average, the spring constant of uninvaded E. coli cells (0.23 +/- 0.02 N/m) was 3 times stiffer than that of the bdelloplast (0.064 +/- 0.001 N/m) when measured in a HEPES-metals buffer. The retraction portions of the force curves indicate that compared to uninvaded E. coli cells bdelloplasts adhere to the AFM tip with much larger pull-off forces but over comparable retraction distances. The strength of these adhesion forces decreases with increasing ionic strength, indicating that there is an electrostatic component to the adhesion events.