Post-corrosion mechanical properties of absorbable open cell iron foams with hollow struts.

In-depth analyses of post-corrosion mechanical properties and architecture of open cell iron foams with hollow struts as absorbable bone scaffolds were carried out. Variations in the architectural features of the foams after 14 days of immersion in a Hanks' solution were investigated using micro-computed tomography and scanning electron microscope images. Finite element Kelvin foam model was developed, and the numerical modeling and experimental results were compared against each other. It was observed that the iron foam samples were mostly corroded in the periphery regions. Except for quasi-elastic gradient, other mechanical properties (i.e. compressive strength, yield strength and energy absorbability) decreased monotonically with immersion time. Presence of adherent corrosion products enhanced the load-bearing capacity of the open cell iron foams at small strains. The finite element prediction for the quasi-elastic response of the 14-day corroded foam was in an agreement with the experimental results. This study highlights the importance of considering corrosion mechanism when designing absorbable scaffolds; this is indispensable to offer desirable mechanical properties in porous materials during degradation in a biological environment.

Effect of Oat (Avena Sativa L.) Extract on Experimental Sciatic Nerve Injury in Rats.

Peripheral nerve disorders are the most common neurological problems; therefore, it is important to intervene to treat or stop the resulting side effects. This study aimed to investigate the effect of oat extract on experimental sciatic nerve injury in rats. Totally, 50 adult male rats were divided into five groups (n=10). Group 1 was exposed to sham condition, and group 2 was regarded as the control group (nerve injury without treatment). Moreover, groups 3-5 were subjected to sciatic nerve injury, and they received oral gavages of the oat extract (100, 200, and 400 mg/kg), respectively. Subsequently, 2 and 4 weeks later, the rats were euthanized for pathological evaluation of nerve repair. The results showed an increase in the formation of the perineurium and epineurium dose in the oat-treated groups (100, 200, and 400 mg/kg), compared to the control group after 2 weeks (P<0.05). Furthermore, the presence of inflammatory cells in the oat extract-treated groups (100, 200, and 400 mg/kg) decreased, compared to that in the control group after 2 weeks (P<0.05). In addition, the swelling of the axon significantly decreased in the oat extract-treated groups (200 and 400 mg/kg), compared to the control group (P<0.05). However, the axon dose-dependently increased in oat-treated groups (100, 200, and 400 mg/kg), compared to that in the control group after 4 weeks (P<0.05). These results suggest that oat extract has positive effects on sciatic nerve repair in rats.

Two spectral QSPR models of porphyrin macromolecules for chelating heavy metals and different ligands released from industrial solvents: CH2Cl2, CHCl3 and toluene.

Two simple and reliable correlations are introduced for the prediction of emission and absorption of porphyrins and their derivatives, i.e. metalloporphyrins and ligand coordinated metalloporphyrins. They can be used to sense the extracted precious metals. The proposed models require only simple structural parameters such as the number of carbon, metal and metal-free molecular fragments of desirable porphyrins or their derivatives. Since the proposed models depend on molecular structures of the desired compounds, they can be easily applied for complex molecular structures. Experimental data of 272 porphyrin derivatives were used to derive and test the novel models for the assessment of their emission (Em.) and absorption (Abs.) values in three solvents namely dichloromethane, toluene and chloroform. The values of the coefficients of determination (r 2) for the training set (183 compounds) in dichloromethane and three different test sets, corresponding to the three mentioned solvents, for the emission and absorption correlations were greater than 0.70. The calculated values of the root-mean-square error (RMSE) for the training sets of Em. and Abs. correlations were equal to 7.56 and 4.86 nm, respectively. Further statistical parameters also confirm the high reliability of the new models.

The effect of lower leg sensory impulses on the force sense of knee extensor muscles in healthy adults: The accuracy of sense-of-force studies.

BACKGROUND: Producing the target force of a muscle group by using visual feedback and reproducing the same force fully blind are regarded as a common approach for quantifying the sense of force. Force sense error is considered to be the difference between the produced target force and reproduced force. The present study aimed to evaluate the effects of tactile sensory feedback in the lower leg on the perceived magnitude of force sense. METHODS AND MATERIALS: In this cross-sectional study, 18 healthy men (mean age 24.31 ±â€¯3.94 years) were selected based on a simple randomized method. First, the quantity of force sense error of the knee extensor muscle group was measured before and after manipulating the tactile inputs of the leg. Then, methods A, B, and C were applied to measure force sense errors. In addition, the tactile impulses were manipulated in methods B and C by placing a piece of thick foam between the distal portion of lower leg among the subjects and the dynamometer. The tactile inputs remained intact during method A. RESULTS: The accuracy of the reproduced target force was significantly affected following the disturbance of tactile inputs in the lower leg in methods B and C, compared to method A (p < 0.05). CONCLUSION: Altering tactile inputs in the lower leg can affect the force sense of the knee extensor muscles. The received somatosensory inputs across the lower leg can affect the whole process of force perception at this joint.

Histopathology and Histomorphological Study of Wound Healing Using Clove Extract Nanofibers (Eugenol) Compared to Zinc Oxide Nanofibers on the Skin of Rats.

In order to evaluate the healing effect of eugenol and other nanofibers, 100 male Wistar rats (200&plusmn;10 g) were used with 14-15 weeks of age in this study. All of the male rats were transferred in the standard cages under controlled exposure conditions in a 12:12 h light/dark cycle with a constant temperature about 22&plusmn;2 oC. In addition, the male rats were fed with pellets. Firstly, anesthesia process was performed by 2% xylazine hydrochloride (10mg/Kg/IP) and 10% ketamine hydrochloride (100mg/Kg/IP), and then the rats were placed on the operating table. Then the dorsal surfaces of the rats&rsquo; skin to ileum were scrubbed and prepared as the next step. A circular wound (with a 7 mm diameter) was created by a 7 mm sterile biopsy punch. All 100 rats were divided into four groups (n=25) randomly named as control, nano zinc oxide (ZnO), eugenol nanofibers, and polycaprolactone groups. After that, they were divided into five groups regarding the wound closure rate in days 3, 5, 7, 14, and 21. Then, the wound dressings were placed on the wounds and renewed every 24 h. At the end of days 3, 5, 7, 14, and 21, the relevant tests, such as histopathology, were conducted by removing the tissue volume using a biopsy punch, and then decapitation process was performed on the rats. It was obvious that eugenol nanofiber showed the best granulation tissue by the production of collagen. Further studies are being performed on wound healing by eugenol nanofiber.

Effect of N-acetyl-cysteine nanoparticles on intra-abdominal adhesion after laparotomy in rats.

Postoperative adhesion (POA) is a common and well-known complication with an estimated risk of 50-100%. The antioxidant effect of n-acetyl-cysteine (NAC) can increase intracellular glutathione levels, thereby reducing adhesion. This study was conducted to compare the outcomes of NAC nanoparticles (Nano-NAC) on intra-abdominal adhesion (IAA) after laparotomy in rat. A total of 25 male Wistar rats were randomized into five groups: 50 mg/kg Nano-NAC, 75 mg/kg Nano-NAC, 150 mg/kg Nano-NAC, NAC and control. During the surgical procedure, some sections (2×2cm) were collected through abdominal midline incision to ensure the infliction of peritoneal damage by a standard adhesion. Macroscopic evaluation was performed on the 14th and 28th day and blood samples were collected to evaluate the inflammatory factor (C-reactive protein) on days 0, 14 and 28. According to the serologic results (CRP test), C-reactive protein was at highest level in 150 mg/kg Nano-NAC and control groups and at lowest level in 50 mg/kg Nano-NAC and 75 mg/kg Nano-NAC groups (p⟨0.001). The macroscopic evaluation results showed that frequency of adhesion bands was significantly lower in 50 mg/kg Nano-NAC group than the control at the intervals. Results showed that the intraperitoneal administration of lower Nano-NAC dosages (50 and 75 mg/kg) had a major role in the management of postoperative inflammation. Nano-NAC administration was proved feasible, safe and effective in reduction of the C-reactive protein level.

A simple approach for assessment of toxicity of nitroaromatic compounds without using complex descriptors and computer codes.

A simple approach is introduced to assess the toxicity of nitroaromatic compounds in terms of an oral LD50 dose (50% lethal dose) for rats. Most of the presented Quantitative Structure-Activity Relationship (QSAR) models for prediction of in vivo toxicity of nitroaromatics are calculated by quantum computing descriptors which are more difficult to interpret and apply, while the new model requires only the molecular structure of a desirable nitroaromatic compound. The novel model is based on the constitutional descriptors, such as the number of oxygen, sulphur, phosphorous and molecular fragments. Experimental data of 90 nitroaromatics are used to derive and test the new model as the logarithm of LD50 values, i.e. -log (LD50). Although it is based on only simple structural parameters, the reliability of the new model is also higher than the complex QSAR model because the values of the root-mean-square deviation (RMSD) of -log (LD50) for the new and the outputs of the latest QSAR method are 0.342 and 0.377, respectively.

Evaluation of Influence of Zeolite/Collagen Nanocomposite (ZC) and Hydroxyapatite (HA) on Bone Healing: A Study on Rabbits.

Bone healing is still a great challenge in orthopedic surgery and clinical practice. There is a dearth of research investigating the effect of Zeolite/Collagen (ZC) nanocomposite on bone regeneration. In the present study, a critical segmental defect of the rabbit femur was repaired using defects in femurs repaired by ZC nanocomposite, and the effects were examined histologically. In total, 45 rabbits at seven months of age weighing 3.5 kilograms were utilized in this study. After making the bone defects, all animals were randomized into three groups (n=15). In a normal control group (NC), a defect was created, no intervention was made, and the skin incision was sutured. On the other hand, in the ZC group, the nanocomposite of ZC was placed into the created defect. In the hydroxyapatite group (HA), the hydroxyapatite was placed into the created defect. The samples were collected on days 15, 30, and 45 postoperatively and assessed histopathologically. The mean scores of the index of the union were compared and considerable alterations were observed in this regard in the experimental groups (P&lt;0.05). The values of the index of spongiosa demonstrated that on day 15, it was the highest in the ZC group (2.2) and lowest in the HA and NC groups (0.6). Moreover, the values of the index of bone marrow demonstrated no noticeable alteration among the values of the index of bone marrow in the experimental groups (P&gt;0.05). The findings of this study demonstrated that ZC nanocomposite might be considered for reconstruction in bone damages. It seems the ZC nanocomposite bears a crucial capability in the reconstruction of bone damages and might be used as a biological frame in bone damages.

Role of dendrimers in advanced drug delivery and biomedical applications: a review.

AIM: Dendrimers dendritic structural design holds vast promises, predominantly for drug delivery, owing to their unique properties. Dendritic architecture is widespread topology found in nature and offers development of specific properties of chemical substances. Dendrimers are an ideal delivery vehicle candidate for open study of the effects of polymer size, charge, and composition on biologically relevant properties such as lipid bilayer interactions, cytotoxicity, bio-distribution, internalization, blood plasma retention time, and filtration. This article reviews role of dendrimers in advanced drug delivery and biomedical applications.

Skeletogenesis in the Persian sturgeon Acipenser persicus and its correlation with gene expression of vitamin K-dependent proteins during larval development.

The present study describes morphological development of the skeleton in the Persian sturgeon Acipenser persicus and discusses the hypothesis that expression of genes encoding vitamin K-dependent proteins (VKDP) might be correlated with the mineralization of skeletal tissues during early development in sturgeons. Results showed that development of cartilage started just after hatching (mean ± S.D., 10·9 ± 0·7 mm in total length, LT ) in the head and notochord, whereas the first signs of mineralization occurred in the dentary and in the dermopalatine and palatopterygoid elements of the upper jaw, coinciding with the onset of exogenous feeding (20·1 ± 1·5 mm LT ). All branchial arch elements developed between 19·3 and 22·3 mm LT , whereas mineralization was only observed in tooth plates associated with the hypobranchial 1 and gill rakers at 20·8 ± 1·5 mm LT and 48·4 ± 6·4 mm LT , respectively. Quantitative real-time PCR showed that transcripts of VKDP genes including bone Gla protein (bgp), matrix Gla protein (mgp) and Gla rich protein (grp) genes were significantly up-regulated during the transition to exogenous feeding, supporting hypotheses about relevance of the above-mentioned genes in chondrogenesis at early developmental stages. The strong mineralization of skeletal elements from 21·5 to 27·3 mm LT (20 days post hatch) was in accordance with the maximal levels of bgp, mgp and grp expression indicating a correlation between development of the skeleton and the expression of VKDP genes. These data are important for evaluating A. persicus larval quality, understanding the influence of rearing biotic and abiotic factors on skeletogenesis and recognizing the occurrence of skeletal deformities in this species.

Synthesis and characterization of MFI-type borosilicate zeolites and evaluation of their efficiency as drug delivery systems.

MFI-type borosilicate zeolites with different Si/B ratio were synthesized by hydrothermal method using silicic acid and sodium tetraborate decahydrate as starting materials. The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetry analysis (TGA/DTG) and Fourier transform infrared spectroscopy (FT-IR). Different characterization techniques confirmed the incorporation of boron atoms into the zeolite framework. SEM images revealed that the particle size of zeolites and their morphology can be controlled by different synthesis parameters. The effect of different parameters such as crystallization time and temperature, pH value of initial gel and Si/B ratio on the crystallinity, morphology and incorporation of boron atoms into final products was investigated and discussed in detail. The efficiency of synthesized borosilicate zeolites as drug delivery systems was examined by loading and in vitro release of anticancer drug doxorubicin (DOX). The results demonstrated that DOX-loaded borosilicate samples show a pH-sensitive drug release feature with higher drug release rate in relatively lower pH values. In vitro cytotoxicity of DOX- loaded borosilicate was evaluated by MTT assay.

A fuzzy-logic based decision-making approach for identification of groundwater quality based on groundwater quality indices.

Due to inherent uncertainties in measurement and analysis, groundwater quality assessment is a difficult task. Artificial intelligence techniques, specifically fuzzy inference systems, have proven useful in evaluating groundwater quality in uncertain and complex hydrogeological systems. In the present study, a Mamdani fuzzy-logic-based decision-making approach was developed to assess groundwater quality based on relevant indices. In an effort to develop a set of new hybrid fuzzy indices for groundwater quality assessment, a Mamdani fuzzy inference model was developed with widely-accepted groundwater quality indices: the Groundwater Quality Index (GQI), the Water Quality Index (WQI), and the Ground Water Quality Index (GWQI). In an effort to present generalized hybrid fuzzy indices a significant effort was made to employ well-known groundwater quality index acceptability ranges as fuzzy model output ranges rather than employing expert knowledge in the fuzzification of output parameters. The proposed approach was evaluated for its ability to assess the drinking water quality of 49 samples collected seasonally from groundwater resources in Iran's Sarab Plain during 2013-2014. Input membership functions were defined as "desirable", "acceptable" and "unacceptable" based on expert knowledge and the standard and permissible limits prescribed by the World Health Organization. Output data were categorized into multiple categories based on the GQI (5 categories), WQI (5 categories), and GWQI (3 categories). Given the potential of fuzzy models to minimize uncertainties, hybrid fuzzy-based indices produce significantly more accurate assessments of groundwater quality than traditional indices. The developed models' accuracy was assessed and a comparison of the performance indices demonstrated the Fuzzy Groundwater Quality Index model to be more accurate than both the Fuzzy Water Quality Index and Fuzzy Ground Water Quality Index models. This suggests that the new hybrid fuzzy indices developed in this research are reliable and flexible when used in groundwater quality assessment for drinking purposes.

An Update on Biomedical Application of Nanotechnology for Alzheimer's Disease Diagnosis and Therapy.

Approximately 35 million people worldwide suffer from Alzheimer's disease (AD). The cellular uptake and specific transport of drugs and imaging agents to brain are common issues in the diagnosis and therapy of AD. New advances in nanotechnology have supplied favorable solutions to this issue. Various nanocarriers such as polymeric nanoparticles, liposomes, micelles, dendrimers and nanogels have been studied for the delivery of drugs and imaging agents to brain. This review presents a succinct discussion of the applications of nanotechnology for Alzheimer's disease diagnosis and therapy.

Study of novel mechano-chemical activation process of red mud to optimize nitrate removal from water.

Red mud (RM) is the industrial waste of alumina production and causes serious environmental risks. In this paper, a novel activation procedure for RM (mechano-chemical processing) is proposed in order to improve the nitrate adsorption from water. High-energy milling and acidification were selected as mechanical and chemical activation methods, respectively. Synthesized samples of adsorbent were produced considering two parameters of activation: acid concentrations and acidification time in two selected milling times. Optimization of the activation process was based on nitrate removal from a stock solution. Experimental data were analyzed with two-way analysis of variance and Kruskal-Wallis methods to verify and discover the accuracy and probable errors. Best conditions (acceptable removal percentage > 75) were 17.6% w/w for acid concentrate and 19.9 minutes for acidification time in 8 hours for milling time. A direct relationship between increase in nitrate removal and increasing the acid concentration and acidification time was observed. The adsorption isotherms were studied and compared with other nitrate adsorbents. Characterization tests (X-ray fluorescence, X-ray diffraction, Fourier transform infrared spectrophotometry, dynamic light scattering, surface area analysis and scanning electron microscopy) were conducted for both raw and activated adsorbents. Results showed noticeable superiority in characteristics after activation: higher specific area and porosity, lower particle size and lower agglomeration in structure.

First-principles-based effective Hamiltonian simulations of bulks and films made of lead-free Ba(Zr,Ti)O3 relaxor ferroelectrics.

A review of the recent development and application of a first-principles-derived effective Hamiltonian technique to the study of lead-free Ba(Zr,Ti)O3 (BZT) relaxor ferroelectrics is provided. In addition to the computation and analysis of macroscopic properties (such as different types of dielectric responses and electric polarization) and their connections to previous published works, particular emphasis is given to microscopic insights arising from this atomistic technique. These include (i) the numerically-found determination of the physical origin of the relaxor behavior in BZT; and (ii) the prediction of polar nanoregions and the evolution of their morphology as a response to temperature, electric fields and epitaxial misfit strain. Other striking phenomena that were predicted in BZT compounds, such as Fano resonance and field-driven percolation, are also documented and discussed. Finally, a brief perspective of possible remaining computational studies to be conducted in relaxor ferroelectrics, in order to further understand them, is attempted.

Lung tissue engineering and preservation of alveolar microstructure using a novel casting method.

We used a rat model to decellularize and seed alveolar cells on a three-dimensional lung scaffold to preserve alveolar microarchitecture. We verified the preservation of terminal respiratory structure by casting and by scanning electron microscopy (SEM) of the casts after decellularization. Whole lungs were obtained from 12 healthy Sprague-Dawley rats, cannulated through the trachea under sterile conditions, and decellularized using a detergent-based method. Casting of both natural and decellularized lungs was performed to verify preservation of the inner microstructure of scaffolds for further cell seeding. Alveolar cell seeding was performed using green fluorescent protein (GFP) lung cells and non-GFP lung cells, and a peristaltic pump. We assessed cell seeding using histological and immunohistochemical staining, and enzymatic evaluation. All cellular components were removed completely from the scaffolds, and histological staining and SEM of casts were used to verify the preservation of tissue structure. Tensile tests verified conservation of biomechanical properties. The hydroxyproline content of decellularized lungs was similar to native lung. Histological and immunohistochemical evaluations showed effective cell seeding on decellularized matrices. Enzymatic measurement of trypsin and alpha 1 antitrypsin suggested the potential functional properties of the regenerated lungs. Casts produced by our method have satisfactory geometrical properties for further cell seeding of lung scaffolds. Preservation of micro-architecture and terminal alveoli that was confirmed by SEM of lung casts increases the probability of an effective cell seeding process.

Dewetting of evaporating thin films over nanometer-scale topographies.

A lubrication model is used to study dewetting of an evaporating thin film layer over a solid substrate with a nanometer-scale topography. The effects of the geometry of the topography, the contact angle, the film thickness, and the slippage on the dewetting have been studied. Our results reveal that the evaporation enhances the dewetting process and reduces the depinning time over the topography. Also it is shown that the depinning time is inversely proportional to the slippage and increasing the contact angle may considerably reduce the depinning time, while the film thickness increases the depinning time.

Evaluation of whole-body MR to CT deformable image registration.

Multimodality image registration plays a crucial role in various clinical and research applications. The aim of this study is to present an optimized MR to CT whole-body deformable image registration algorithm and its validation using clinical studies. A 3D intermodality registration technique based on B-spline transformation was performed using optimized parameters of the elastix package based on the Insight Toolkit (ITK) framework. Twenty-eight (17 male and 11 female) clinical studies were used in this work. The registration was evaluated using anatomical landmarks and segmented organs. In addition to 16 anatomical landmarks, three key organs (brain, lungs, and kidneys) and the entire body volume were segmented for evaluation. Several parameters--such as the Euclidean distance between anatomical landmarks, target overlap, Dice and Jaccard coefficients, false positives and false negatives, volume similarity, distance error, and Hausdorff distance--were calculated to quantify the quality of the registration algorithm. Dice coefficients for the majority of patients (> 75%) were in the 0.8-1 range for the whole body, brain, and lungs, which satisfies the criteria to achieve excellent alignment. On the other hand, for kidneys, Dice coefficients for volumes of 25% of the patients meet excellent volume agreement requirement, while the majority of patients satisfy good agreement criteria (> 0.6). For all patients, the distance error was in 0-10 mm range for all segmented organs. In summary, we optimized and evaluated the accuracy of an MR to CT deformable registration algorithm. The registered images constitute a useful 3D whole-body MR-CT atlas suitable for the development and evaluation of novel MR-guided attenuation correction procedures on hybrid PET-MR systems.

MRI-guided attenuation correction in whole-body PET/MR: assessment of the effect of bone attenuation.

OBJECTIVE: Hybrid PET/MRI presents many advantages in comparison with its counterpart PET/CT in terms of improved soft-tissue contrast, decrease in radiation exposure, and truly simultaneous and multi-parametric imaging capabilities. However, the lack of well-established methodology for MR-based attenuation correction is hampering further development and wider acceptance of this technology. We assess the impact of ignoring bone attenuation and using different tissue classes for generation of the attenuation map on the accuracy of attenuation correction of PET data. METHODS: This work was performed using simulation studies based on the XCAT phantom and clinical input data. For the latter, PET and CT images of patients were used as input for the analytic simulation model using realistic activity distributions where CT-based attenuation correction was utilized as reference for comparison. For both phantom and clinical studies, the reference attenuation map was classified into various numbers of tissue classes to produce three (air, soft tissue and lung), four (air, lungs, soft tissue and cortical bones) and five (air, lungs, soft tissue, cortical bones and spongeous bones) class attenuation maps. RESULTS: The phantom studies demonstrated that ignoring bone increases the relative error by up to 6.8% in the body and up to 31.0% for bony regions. Likewise, the simulated clinical studies showed that the mean relative error reached 15% for lesions located in the body and 30.7% for lesions located in bones, when neglecting bones. These results demonstrate an underestimation of about 30% of tracer uptake when neglecting bone, which in turn imposes substantial loss of quantitative accuracy for PET images produced by hybrid PET/MRI systems. CONCLUSION: Considering bones in the attenuation map will considerably improve the accuracy of MR-guided attenuation correction in hybrid PET/MR to enable quantitative PET imaging on hybrid PET/MR technologies.

Paclitaxel loaded niosome nanoparticle formulation prepared via reverse phase evaporation method: an in vitro evaluation.

Niosoms are nanoparticles used in drug delivery systems. Niosomes are prepared by various methods. In this research niosoms were prepared by reverse phase evaporation and the factors affecting the niosomes formation were studied. Percent of paclitaxel pegylated and non-pegylated prepared with Span 60 were 95 and 92, respectively while for those of pegylated and non-pegylated niosomes with Span 20, 94 and 90, respectively. In addition, the average diameters of pegylated and no-pegylated prepared with Span 60 and 20 were determined to be 191, 214, 244 and 284 nm, respectively. The amount of released drug (48 h) from pegylated and non pegylated formulations in the presence of Spans 60 and 20 were 8, 10, 6, 7%, respectively. Cytotoxicities ofpaclitaxel niosom polyethyleneglycol, paclitaxel niosome and free paclitaxel on MCF-7 cell line after 48 hours were studied by MTT assay. The results showed the formulation prepared with Span 60 is more effective than that of Span 20 and the IC50 of the former was decreased twice while IC50 of the later decreased 1.5 times.