Dead in the water - Role of relic DNA and primer choice for targeted sequencing surveys of anaerobic sewage sludge intended for biological monitoring.

DNA-based monitoring of microbial communities that are responsible for the performance of anaerobic digestion of sewage wastes has the potential to improve resource recoveries for wastewater treatment facilities. By treating sludge with propidium monoazide (PMA) prior to amplicon sequencing, this study explored how the presence of DNA from dead microbial biomass carried over with feed sludge may mislead process-relevant biomarkers, and whether primer choice impacts such assessments. Four common primers were selected for amplicon preparation, also to determine if universal primers have sufficient taxonomic or functional coverage for monitoring ecological performance; or whether two domain-specific primers for Bacteria and Archaea are necessary. Anaerobic sludges of three municipal continuously stirred-tank reactors in Victoria, Australia, were sampled at one time-point. A total of 240 amplicon libraries were sequenced on a Miseq using two universal and two domain-specific primer pairs. Untargeted metabolomics was chosen to complement biological interpretation of amplicon gene-based functional predictions. Diversity, taxonomy, phylogeny and functional potentials were systematically assessed using PICRUSt2, which can predict community wide pathway abundance. The two chosen universal primers provided similar diversity profiles of abundant Bacteria and Archaea, compared to the domain-specific primers. About 16 % of all detected prokaryotic genera covering 30 % of total abundances and 6 % of PICRUSt2-estimated pathway abundances were affected by PMA. This showed that dead biomass in the anaerobic digesters impacted DNA-based assessments, with implications for predicting active processes, such as methanogenesis, denitrification or the identification of organisms associated with biological foams. Hence, instead of running two sequencing runs with two different domain-specific primers, we propose conducting PMA-seq with universal primer pairs for routine performance monitoring. However, dead sludge biomass may have some predictive value. In principal component analysis the compositional variation of 239 sludge metabolites resembled that of 'dead-plus-alive' biomass, suggesting that dead organisms contributed to the potentially process-relevant sludge metabolome.

Coupling Partial Nitritation, Anammox and n-DAMO in a membrane aerated biofilm reactor for simultaneous dissolved methane and nitrogen removal.

Anaerobic technologies with downstream autotrophic nitrogen removal have been proposed to enhance bioenergy recovery and transform a wastewater treatment plant from an energy consumer to an energy exporter. However, approximately 20-50 % of the produced methane is dissolved in the anaerobically treated effluent and is easily stripped into the atmosphere in the downstream aerobic process, contributing to the release of greenhouse gas emissions. This study aims to develop a solution to beneficially utilize dissolved methane to support high-level nitrogen removal from anaerobically treated mainstream wastewater. A novel technology, integrating Partial Nitritation, Anammox and Methane-dependent nitrite/nitrate reduction (i.e. PNAM) was demonstrated in a membrane-aerated biofilm reactor (MABR). With the feeding of ∼50 mg NH4+-N/L and ∼20 mg/L dissolved methane at a hydraulic retention time of 15 h, around 90 % of nitrogen and ∼100 % of dissolved methane can be removed together in the MABR. Microbial community characterization revealed that ammonia-oxidizing bacteria (AOB), nitrite-oxidizing bacteria (NOB), anammox bacteria, nitrite/nitrate-dependent anaerobic methane oxidation microorganisms (n-DAMO bacteria and archaea) and aerobic methanotrophs co-existed in the established biofilm. Batch tests confirmed the active microbial pathways and showed that AOB, anammox bacteria and n-DAMO microbes were jointly responsible for the nitrogen removal, and dissolved methane was mainly removed by the n-DAMO process, with aerobic methane oxidation making a minor contribution. In addition, the established system was robust against dynamic changes in influent composition. The study provides a promising technology for the simultaneous removal of dissolved methane and nitrogen from domestic wastewater, which can support the transformation of wastewater treatment from an energy- and carbon-intensive process, to one that is energy- and carbon-neutral.

One-year stable pilot-scale operation demonstrates high flexibility of mainstream anammox application.

Mainstream nitrogen removal via anammox is widely recognized as a promising wastewater treatment process. However, its application is challenging at large scale due to unstable suppression of nitrite-oxidizing bacteria (NOB). In this study, a pilot-scale mainstream anammox process was implemented in an Integrated Fixed-film Activated Sludge (IFAS) configuration. Stable operation with robust NOB suppression was maintained for over one year. This was achieved through integration of three key control strategies: i) low dissolved oxygen (DO = 0.4 ± 0.2 mg O2/L), ii) regular free nitrous acid (FNA)-based sludge treatment, and iii) residual ammonium concentration control (NH4 + with a setpoint of ∼8 mg N/L). Activity tests and FISH demonstrated that NOB barely survived in sludge flocs and were inhibited in biofilms. Despite receiving organic-deficient wastewater from a pilot-scale High-Rate Activated Sludge (HRAS) system as the feed, the system maintained a stable effluent total nitrogen concentration mostly below 10 mg N/L, which was attributed to the successful retention of anammox bacteria. This study successfully demonstrated large-scale long-term mainstream anammox application and generated new practical knowledge for NOB control and anammox retention.