Are we adequately managing the oral health needs of children: a survey of the experience of general dentists and self-assessed confidence in pediatric dentistry.

Childhood caries is a public health problem with a significant burden on the community. The specialist dental workforce cannot adequately manage all treatment needs in children. Therefore, the general dental community remains critical in delivering care to children. The purpose of this study was to investigate the self-rated confidence of general practitioners in treating children. A cross-sectional survey was designed that involved general dentists in various primary care centers in Jordan. Participants were asked to complete a questionnaire about their experience and self-perceived level of confidence in performing various procedures in children using the Likert scale. Descriptive statistics, t-tests and one-way analysis of variance (ANOVA) were used for data analysis. A total of 150 general dentists completed the questionnaire. The overall confidence score was high (3/4). Most respondents (86.7%) reported high confidence in providing prophylaxis and preventive treatment. The lowest level of confidence was reported for dental trauma and interceptive orthodontics. No statistically significant gender disparity was found except for the management of dental trauma in which males were significantly more confident than females. Regarding years of experience, confidence levels in dental trauma management were significantly higher among dentists with 5-10 years of experience compared to the recently graduated and the longest qualified dentists (p = 0.008). Similarly, for interceptive orthodontics, participants with 5-10 years of practice were significantly more confident compared to dentists in the other groups (p = 0.021). One-third of participants (30.1%) were not willing to treat children and considered them disruptive to their practice. Overall, This study revealed low levels of confidence in dental trauma management and interceptive orthodontics in children. Modification of dental curricula to increase clinical exposure should positively reflect on future levels of confidence. Strategies should be implemented to encourage general dentists to treat children to ensure equitable access for all.

The Use of Local Anesthesia in Pediatric Dentistry: A Survey of Specialists' Current Practices in Children and Attitudes in Relation to Articaine.

Aims: This study aimed to evaluate the clinical practices of local anesthesia in children. The study also sought to investigate pediatric dentists' views on articaine infiltration anesthesia and their willingness to use it to replace the inferior dental nerve block in primary molars. Materials and Methods: A cross-sectional survey was emailed to 183 registered specialists. Descriptive statistics along with chi-square and Fisher's exact tests were used for data analysis. Results: A total of 72 responses were received. The sample consisted of 62 (86.1%) females and 10 (13.8%) males with varying levels of experience. The vast majority of respondents (98.6%) used topical anesthesia in their practice with children. The most frequently used anesthetic agent was 2% lidocaine (72.2%) followed by 4% articaine (54.2%). The entire sample indicated that they frequently find difficulties in dose calculation for their child patient. Gender and level of experience did not significantly influence specialists' practice or their knowledge of local anesthesia. More than a third (31.9%) of participants were not happy to replace the block anesthesia with articaine infiltration for the treatment of lower primary molars. The most indicated reasons for this unwillingness were lack of effectiveness (11%) and inadequate scientific evidence (11%). Conclusion: Most pediatric dentists used topical anesthesia with children. Lidocaine was the most commonly used injectable local anesthesia. Specialists' current practices of local anesthesia in children generally conformed well to good standards. However, inadequate knowledge regarding dose calculation was revealed. In addition, specialists' reluctance to use articaine infiltration instead of the block anesthesia was evident in the current population. Further studies, with larger sample size are encouraged.

Fracture strength of endocrown maxillary restorations using different preparation designs and materials.

PURPOSE: This study investigated the impact of preparation design and material types on fracture strength in maxillary premolars endocrowns after thermodynamic aging. MATERIALS AND METHODS: Eighty two-rooted maxillary premolar crowns underwent endodontic treatment (N = 80, n = 10). The teeth were categorized into ten groups (4-mm deep with no intracanal extension lithium disilicate glass ceramic & multilayer zirconia endocrowns (LE0 & ZE0); 4-mm deep with 4-mm intracanal extension in one canal (LE1 & ZE1); 4-mm deep with 2-mm intracanal extensions in both canals (LE2 & ZE2); flat overlays with no endocore (LO & ZO); glass fiber reinforced post & core and crown (LC & ZC)). After cementation, all specimens were subjected to 1500 thermocycles and 1,200,000 chewing cycles with an axial occlusal load of 49 N. A static loading test was performed at a non-axial 45° loading using a universal testing machine and failure modes (Type I: restoration debonding; Type II: restoration fracture; Type III: restoration/tooth complex fracture above bone level; Type IV: restoration/tooth complex fracture below bone level) were evaluated using a stereoscope. Data were ananalzed using 2-way ANOVA and Tukey's tests (alpha = 0.05). RESULTS: The endocrowns manufactured from multilayered zirconia and pressed lithium disilicate glass ceramic exhibited a fracture load ranging between 1334 ± 332 N and 756 ± 150 N, with ZC presenting the highest and LE2 the lowest values. The differences were not statistically significant (p > 0.05). CONCLUSION: All endocrowns tested in this study performed similar considering the different designs and materials tested. The distribution of fracture modes did not differ significantly depending on the design of the restoration and the type of material used.

Blended learning in undergraduate dental education: a global pilot study.

AIMS: To explore the global trends in blended learning in undergraduate dental education during the COVID pandemic and during the recovery phase by engaging with the students and faculty and evaluate the implications for dental education in the post-COVID era. METHODS: It was a pilot cross-sectional study which employed a convenience sampling technique to recruit representatives of dental faculty and undergraduate students in 80 dental institutions globally. A previously validated questionnaire consisting of a combination of closed and open-ended items was used for data collection. Responses to these online questionnaires were processed and analysed using the R statistical computing environment. RESULTS: A total of 320 dental students and 169 faculty members from 47 different dental institutions participated in the study. Video and Live Online Tutorials were considered to be the most effective method of online learning followed by online question banks by both groups. Significant differences were noted between faculty and students regarding time spent and effectiveness of online teaching and learning, respectively, both before and after the start of COVID. The results highlight the faculty need to engage more closely with the students to address their learning needs. Finally, the participants provided several recommendations regarding the future development of teaching and learning strategies as well as assessments in the post-pandemic era. CONCLUSIONS: This is the first study which explores blended learning in dental education with participants from multiple institutions in different regions of the globe. Compared to the faculty, students considered online learning to be less interactive and preferred learning activities and all assessments to be delivered face-to-face. The results underscore the need to adapt teaching practices to suit the learning needs of the students.

Fabrication and mechanical properties of biomimetic nacre-like ceramic/polymer composites for chairside CAD/CAM dental restorations.

OBJECTIVE: To fabricate and characterise a novel chairside CAD/CAM composite dental materials. These composites have a nacre-like anisotropic microstructure, consisting of highly aligned ceramic scaffolds infiltrated with polymer. METHOD: Bi-directional freeze casting of alumina ceramic suspension was used to fabricate highly aligned ceramic scaffolds that were subsequently uniaxially pressed to control the ceramic volume fraction and then infiltrated with UDMA/TEGDMA polymer. The produced composites were subjected to mechanical testing, namely three-point bending, hardness and fracture toughness tests. RESULTS: Novel biomimetic ceramic/polymer composites (BCPCs) were fabricated with nacre-like brick and mortar anisotropic microstructure. The mechanical properties were dependent on the ceramic volume fraction. The 70 vol% BCPC had sufficient flexural strength (135.08-145.77 MPa), stiffness (57.75-61.22 GPa) and hardness (3.07-3.36 GPa) and showed remarkable fracture resistance with KIC value of (2.54 MPa m1/2). SIGNIFICANT: Novel biomimetic ceramic/polymer composites show great potential as the next generation of CAD/CAM dental materials, as they closely resemble the combined mechanical properties of dentine and enamel.

Debris Extrusion Using Reciproc Blue and XP Endo Shaper Systems in Root Canal Retreatment.

This study aimed at assessing the performance of Reciproc Blue (RB) and XP Endo Shaper (XPS), used for canal retreatment on extracted teeth, in terms of debris extrusion and obturating materials removal. Thirty mandibular premolars were prepared to ProTaper X2 file, obturated using warm vertical compaction, and then incubated for 28 days at 100% humidity at 37°C. Teeth were randomly assigned into two groups, according to the system used for retreatment (RB and XPS). During retreatment, debris extruded beyond the apex was collected in preweighed Eppendorf tubes, and the retreatment time was measured. Afterward, the teeth were longitudinally sectioned to assess the remaining obturating materials. Data were statistically analyzed using the Mann-Whitney test and chi-square test at a 95% confidence level. All the samples had extruded debris at varying weights ranging from 0.125 mg to 3.680 mg. XPS extruded less debris than RB, but no difference was detected (Mann-Whitney test; P > 0.05). RB and XPS required 54.9 ± 17.9 and 22.3 ± 9.3 seconds to perform retreatment procedures, respectively (Mann-Whitney test; P < 0.05). The sealer was found in all the samples. Compared to the RB group, fewer samples with remaining gutta-percha were found in the XPS group (Chi-square test; P < 0.05). None of the files fractured during the retreatment procedure. The tested files appear to extrude debris beyond the apex. Although XPS was able to remove the gutta-percha completely from the majority of the canals, it was unable to remove the sealer.

Evaluating In Vitro Performance of Novel Nickel-Titanium Rotary System (TruNatomy) Based on Debris Extrusion and Preparation Time from Severely Curved Canals.

INTRODUCTION: This laboratory-based study aimed to investigate the quantitative amount of apically extruded debris from severely curved root canals and the preparation time for the novel rotary system TruNatomy (TN; Dentsply Sirona, Charlotte, NC) compared with Reciproc Blue (RCB; VDW Dental, Munich, Germany), HyFlex (HyFlex Controlled Memory [HCM; Coltene/Whaledent, Altstatten, Switzerland] and HyFlex EDM [HEDM, Coltene/Whaledent]), and ProTaper Next (PTN; Dentsply Maillefer, Ballaigues, Switzerland) rotary systems. METHODS: One hundred mandibular molar human teeth with severe curvature of the mesiobuccal canal (25°-45°) were included in the present study. The specimens were randomly distributed into 5 balanced groups (n = 20): TN, RCB, HCM, PTN, and HEDM. The amount of extruded debris for each group during instrumentation at body temperature was collected in an Eppendorf tube. After desiccation, the mean debris weights for each group were calculated. The total preparation time for each group was also recorded. Data were statistically analyzed using the Kruskal-Wallis test at a significance level of P < .05. RESULTS: The HCM and HEDM groups extruded a significantly higher amount of debris than the other tested groups (P < .001). TN extruded the least amount of debris, but it was not significantly different compared with the RCB and PTN groups (P > .05). In terms of preparation time, the TN group did not show any significant difference compared with the other groups. CONCLUSIONS: All instrumentation systems extruded debris. TN was among the groups that produced the lowest amount of apically extruded debris that is clinically acceptable. The amount of apically extruded debris using the TN system was equal to 2 popular systems and statistically significantly less than 2 other popular systems studied.

Implications of resin-based composite (RBC) restoration on cuspal deflection and microleakage score in molar teeth: Placement protocol and restorative material.

OBJECTIVE: To assess the cuspal deflection of standardised large mesio-occluso-distal (MOD) cavities in third molar teeth restored using conventional resin-based composite (RBC) or their bulk fill restorative counterparts compared with the unbound condition using a twin channel deflection measuring gauge. Following thermocycling, the cervical microleakage of the restored teeth was assessed to determine marginal integrity. METHODS: Standardised MOD cavities were prepared in forty-eight sound third molar teeth and randomly allocated to six groups. Restorations were placed in conjunction with (and without) a universal bonding system and resin restorative materials were irradiated with a light-emitting-diode light-curing-unit. The dependent variable was the restoration protocol, eight oblique increments for conventional RBCs or two horizontal increments for the bulk fill resin restoratives. The cumulative buccal and palatal cuspal deflections from a twin channel deflection measuring gauge were summed, the restored teeth thermally fatigued, immersed in 0.2% basic fuchsin dye for 24h, sectioned and examined for cervical microleakage score. RESULTS: The one-way analysis of variance (ANOVA) identified third molar teeth restored using conventional RBC materials had significantly higher mean total cuspal deflection values compared with bulk fill resin restorative restoration (all p<0.0001). For the conventional RBCs, Admira Fusion (bonded) third molar teeth had significantly the lowest microleakage scores (all p<0.001) while the Admira Fusion x-tra (bonded) bulk fill resin restored teeth had significantly the lowest microleakage scores compared with Tetric EvoCeram Bulk Fill (bonded and non-bonded) teeth (all p<0.001). SIGNIFICANCE: Not all conventional RBCs or bulk fill resin restoratives behave in a similar manner when used to restore standardised MOD cavities in third molar teeth. It would appear that light irradiation of individual conventional RBCs or bulk fill resin restoratives may be problematic such that material selection is vital in the absence of clinical data.