Influence of Propolis Extract (Caffeic Acid Phenethyl Ester) Addition on the Candida albicans Adhesion and Surface Properties of Autopolymerized Acrylic Resin.

Background: Denture stomatitis has been linked to the adhesion and proliferation of Candida albicans (C. albicans) on denture bases, which is a common and recurrent problem in denture wearers. The current study aimed to evaluate the effect of incorporating caffeic acid phenethyl ester (CAPE) into autopolymerized polymethyl methacrylate (PMMA) acrylic resin on C. albicans adhesion, surface roughness, and hardness as well as the correlation between tested properties. Methods: Autopolymerized acrylic resin discs (N = 100, 50/C. albicans adhesion; 50/C. albicans surface roughness and hardness test) were fabricated in dimensions 15 × 2.5 mm, samples were categorized into 5 groups (n = 10) based on CAPE concentrations; unmodified (control), 2.5, 5, 10 and 15% wt of acrylic powder. Specimens were stored in distilled water for 48 h at 37°C. C. albicans adhesion was evaluated via direct culture method. Profilometer and Vickers hardness tester were used for surface roughness and hardness measurement. Post hoc Tukey's HSD with ANOVA test was performed to compare the difference of means amongst groups. P values were statistically significant at ≤0.05. Results: The addition of 2.5% of CAPE to PMMA has significantly reduced C. albicans counts in comparison to higher CAPE concentrations (p < 0.001). As for surface roughness, it was noticed that it increased with increased CAPE concentrations (p < 0.0001). While surface hardness decreased as CAPE concentrations increased (p < 0.0001). All tested properties showed a significant difference amongst groups for C. albicans colony count and surface parameters. Conclusion: The addition of 2.5% of CAPE to PMMA acrylic resin significantly decreased C. albicans count compared to higher CAPE concentrations. CAPE can be used as an adjunct in the prevention of DS by incorporating in the PMMA acrylic resin.

Color Stability and Surface Properties of PMMA/ZrO2 Nanocomposite Denture Base Material after Using Denture Cleanser.

OBJECTIVES: This study aimed to evaluate denture cleanser effects on color stability, surface roughness, and hardness of PMMA denture base resin reinforced with nano-ZrO2. MATERIALS AND METHODS: A total of 420 specimens were fabricated of unreinforced and nano-ZrO2 reinforced acrylic resin at 2.5% and 5%, resulting in 3 main groups. These groups were further subdivided (n = 10) according to immersion solution (distilled water, Corega, sodium hypochlorite, and Renew) and immersion duration. Surface roughness, hardness, and color were measured at baseline (2 days-T 0) in distilled water and then after 180 and 365 days of immersion (T 1 & T 2) in water or denture cleansing solutions. Data was collected and analyzed using two-way ANOVA followed by Bonferroni post hoc test (α = 0.05). RESULTS: Surface roughness increased significantly after denture cleanser immersion of unmodified and nano-ZrO2-modified PMMA materials while hardness decreased (P < 0.001). The denture cleansers significantly affected the color of both PMMA denture bases (P < 0.001). The immersion time in denture cleansers significantly affected all tested properties (P < 0.001). Within denture cleansers, NaOCl showed the highest adverse effects (P < 0.05) while Renew showed the least adverse effects. CONCLUSION: Denture cleansers can significantly result in color change and alter the surface roughness and hardness of denture base resin even with ZrO2 nanoparticles addition. Therefore, they should be carefully used.

The use of social media for professional purposes among dentists in Saudi Arabia.

AIM: To investigate the dentists' opinions towards social media (SM) use in daily practice and the expected limitations from its use in Saudi Arabia. METHODS: An electronic survey was carried out throughout May-June 2020 among a sample of dentists in Saudi Arabia. The survey covered three parts: the first part covered professional and demographic information, the second part covered the use of mobile phones and SM in dental practice, while the third part assessed dentists' opinion on SM use. Descriptive statistics included frequency distributions and percentages and independent t test/ANOVA test for the relationship between the mean of dentists' opinion towards SM and demographic variables. A p value of 0.05 or less was considered statistically significant. RESULTS: The majority of respondents (80%) believe that SM plays an active role in patients' decisions regarding the selection of a healthcare provider. The mean dentists' opinion scores on the use of SM were significantly lower among participants working more than 50 h per week compared with other participants (p = 0.014). CONCLUSION: The majority of sampled dentists believe that SM plays an active role in patients' decisions regarding the healthcare provider's selection. Directed campaigns can help dentists optimize the use of SM for both professional and personal purposes.

Prevalence of partial edentulism and RPD design in patients treated at College of Dentistry, Imam Abdulrahman Bin Faisal University, Saudi Arabia.

This study aimed to investigate the prevalence of partial edentulism, RPD type, design, and components and their frequency of use by patients at the prosthodontic clinics of the College of Dentistry, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia. The prepared surveys, laboratory authorization forms, and images of the RPD metal frameworks on casts were used for data collection. Two calibrated investigators studied the digital photographs to identify the Kennedy classification, type of RPD, major connector, clasp assembly, and other details. Data was collected and analyzed statistically. The results showed that the most common class of partial edentulism was Kennedy class I, whereas class IV was the least (p < 0.001). Sixty two percent of fabricated RPDs had metal frameworks, whereas 37.2% were frameless. RPI was the most frequently used clasp assembly (38.9%), a significant finding in Kennedy class I(p < 0.01). The maxillary anteroposterior palatal strap and mandibular lingual plate were the most commonly used major connectors, at 41.2% and 60.8%, respectively. Conclusions: Simple RPD design that accomplishes the treatment objectives as well as proper communication with a well-trained dental technician would promote the success of RPDs.

Effect of zirconium oxide nanoparticles addition on the optical and tensile properties of polymethyl methacrylate denture base material.

BACKGROUND: Polymethyl methacrylate (PMMA) is widely used for the fabrication of removable prostheses. Recently, zirconium oxide nanoparticles (nano-ZrO2) have been added to improve some properties of PMMA, but their effect on the optical properties and tensile strength are neglected. OBJECTIVE: The aim of this study was to investigate the effect of nano-ZrO2 addition on the translucency and tensile strength of the PMMA denture base material. MATERIALS AND METHODS: Eighty specimens (40 dumbbell-shaped and 40 discs) were prepared out of heat-polymerized acrylic resin and divided into four groups per test (n=10). The control group for each test included unreinforced acrylic, while the test groups were reinforced with 2.5, 5, and 7.5 wt% nano-ZrO2. Acrylic resin was mixed according to manufacturer's instructions, packed, and processed by conventional method. After polymerization, all specimens were finished, polished, and stored in distilled water at 37°C for 48±2 hours. Tensile strength (MPa) was evaluated using the universal testing machine while the specimens' translucency was examined using a spectrophotometer. Statistical analysis was carried out by SPSS using the paired sample t-test (p≤0.05). A scanning electron microscope was used to analyze the morphological changes and topography of the fractured surfaces. RESULTS: This study showed that the mean tensile strength of the PMMA in the test groups of 2.5%NZ, 5%NZ, and 7.5%NZ was significantly higher than the control group. The tensile strength increased significantly after nano-ZrO2 addition, and the maximum increase seen was in the 7.5%NZ group. The translucency values of the experimental groups were significantly lower than those of the control group. Within the reinforced groups, the 2.5%NZ group had significantly higher translucency values when compared to the 5%NZ and 7.5%NZ groups. CONCLUSION: The addition of nano-ZrO2 increased the tensile strength of the denture base acrylic. The increase was directly proportional to the nano-ZrO2 concentration. The translucency of the PMMA was reduced as the nano-ZrO2 increased. CLINICAL SIGNIFICANCE: Based on the results of the current study, the tensile strength was improved with different percentages of nano-ZrO2 additions. However, translucency was adversely affected. Therefore, it is important to determine the appropriate amount of reinforcing nano-ZrO2 that will create a balance between achieved properties - mechanical and optical.