Construction of an Electrical Conductor, Strain Sensor, Electrical Connection and Cycle Switch Using Conductive Graphite Cotton Fabrics.

Researchers in science and industry are increasingly interested in conductive textiles. In this article, we have successfully prepared conductive textiles by applying a graphite dispersion to cotton fabric using a simple brush-coating-drying method and the solvents of dimethyl sulfoxide, dimethyl formamide, and a solvent mixture of both. The sheet resistance of the resulting cotton fabrics could be influenced by the type of polar solvent used to prepare the graphite dispersion and the concentration of graphite. In addition, the graphite cotton fabrics showed semiconductive behavior upon studying the resistance at different temperatures. A flexible strain sensor was fabricated using these graphite cotton fabrics for human motion detection. Most importantly, the resulting strain sensor functions even after 100 bending cycles, indicating its excellent reproducibility. In addition, our results have also shown that these graphite cotton fabrics can be used as electrical interconnects in electrical circuits without any visible degradation of the conductive cotton. Finally, a cotton electrical cycle switch was made using the graphite cotton fabrics and worked in the on and off state.

Design and Characterization of Zeolite/Serpentine Nanocomposite Photocatalyst for Solar Hydrogen Generation.

In this work, a low-cost, high-yield hydrothermal treatment was used to produce nanozeolite (Zeo), nanoserpentine (Serp), and Zeo/Serp nanocomposites with weight ratios of 1:1 and 2:1. At 250 °C for six hours, the hydrothermal treatment was conducted. Various methods are used to explore the morphologies, structures, compositions, and optical characteristics of the generated nanostructures. The morphological study revealed structures made of nanofibers, nanorods, and hybrid nanofibril/nanorods. The structural study showed clinoptilolite monoclinic zeolite and antigorite monoclinic serpentine with traces of talcum mineral and carbonates. As a novel photoelectrochemical catalyst, the performance of the Zeo/Serp (2:1) composite was evaluated for solar hydrogen generation from water splitting relative to its constituents. At -1 V, the Zeo/Serp (2:1) composite produced a maximum current density of 8.44 mA/g versus 7.01, 6.74, and 6.6 mA/g for hydrothermally treated Zeo/Serp (1:1), Zeo, and Serp, respectively. The Zeo/Serp (2:1) photocatalysts had a solar-to-hydrogen conversion efficiency (STH) of 6.5% and an estimated hydrogen output rate of 14.43 mmole/h.g. Consequently, the current research paved the way for low-cost photoelectrochemical catalytic material for efficient solar hydrogen production by water splitting.

Fabrication and Characterization of Nanostructured Rock Wool as a Novel Material for Efficient Water-Splitting Application.

Rock wool (RW) nanostructures of various sizes and morphologies were prepared using a combination of ball-mill and hydrothermal techniques, followed by an annealing process. Different tools were used to explore the morphologies, structures, chemical compositions and optical characteristics of the samples. The effect of initial particle size on the characteristics and photoelectrochemical performance of RW samples generated hydrothermally was investigated. As the starting particle size of ball-milled natural RW rises, the crystallite size of hydrothermally formed samples drops from 70.1 to 31.7 nm. Starting with larger ball-milled particle sizes, the nanoparticles consolidate and seamlessly combine to form a continuous surface with scattered spherical nanopores. Water splitting was used to generate photoelectrochemical hydrogen using the samples as photocatalysts. The number of hydrogen moles and conversion efficiencies were determined using amperometry and voltammetry experiments. When the monochromatic wavelength of light was increased from 307 to 460 nm for the manufactured RW>0.3 photocatalyst, the photocurrent density values decreased from 0.25 to 0.20 mA/mg. At 307 nm and +1 V, the value of the incoming photon-to-current efficiency was ~9.77%. Due to the stimulation of the H+ ion rate under the temperature impact, the Jph value increased by a factor of 5 when the temperature rose from 40 to 75 °C. As a result of this research, for the first time, a low-cost photoelectrochemical catalytic material is highlighted for effective hydrogen production from water splitting.

Tuning the Metal-Insulator Transition Properties of VO2 Thin Films with the Synergetic Combination of Oxygen Vacancies, Strain Engineering, and Tungsten Doping.

Vanadium oxide (VO2) is considered a Peierls-Mott insulator with a metal-insulator transition (MIT) at Tc = 68° C. The tuning of MIT parameters is a crucial point to use VO2 within thermoelectric, electrochromic, or thermochromic applications. In this study, the effect of oxygen deficiencies, strain engineering, and metal tungsten doping are combined to tune the MIT with a low phase transition of 20 °C in the air without capsulation. Narrow hysteresis phase transition devices based on multilayer VO2, WO3, Mo0.2W0.8O3, and/or MoO3 oxide thin films deposited through a high vacuum sputtering are investigated. The deposited films are structurally, chemically, electrically, and optically characterized. Different conductivity behaviour was observed, with the highest value towards VO1.75/WO2.94 and the lowest VO1.75 on FTO glass. VO1.75/WO2.94 showed a narrow hysteresis curve with a single-phase transition. Thanks to the role of oxygen vacancies, the MIT temperature decreased to 35 °C, while the lowest value (Tc = 20 °C) was reached with Mo0.2W0.8O3/VO2/MoO3 structure. In this former sample, Mo0.2W0.8O3 was used for the first time as an anti-reflective and anti-oxidative layer. The results showed that the MoO3 bottom layer is more suitable than WO3 to enhance the electrical properties of VO2 thin films. This work is applied to fast phase transition devices.

A Review on Green Synthesis of TiO2 NPs: Photocatalysis and Antimicrobial Applications.

Nanotechnology is a fast-expanding area with a wide range of applications in science, engineering, health, pharmacy, and other fields. Nanoparticles (NPs) are frequently prepared via a variety of physical and chemical processes. Simpler, sustainable, and cost-effective green synthesis technologies have recently been developed. The synthesis of titanium dioxide nanoparticles (TiO2 NPs) in a green/sustainable manner has gotten a lot of interest in the previous quarter. Bioactive components present in organisms such as plants and bacteria facilitate the bio-reduction and capping processes. The biogenic synthesis of TiO2 NPs, as well as the different synthesis methods and mechanistic perspectives, are discussed in this review. A range of natural reducing agents including proteins, enzymes, phytochemicals, and others, are involved in the synthesis of TiO2 NPs. The physics of antibacterial and photocatalysis applications were also thoroughly discussed. Finally, we provide an overview of current research and future concerns in biologically mediated TiO2 nanostructures-based feasible platforms for industrial applications.