Treatment of pharmaceutical industry wastewater for water reuse in Jordan using hybrid constructed wetlands.

Developing cost-efficient wastewater treatment technologies for safe reuse is essential, especially in developing countries simultaneously facing water scarcity. This study developed and evaluated a hybrid constructed wetlands (CWs) approach, incorporating tidal flow (TF) operation and utilising local Jordanian zeolite as a wetland substrate for real pharmaceutical industry wastewater treatment. Over 273 days of continuous monitoring, the results revealed that the first-stage TFCWs filled with either raw or modified zeolite performed significantly higher reductions in Chemical Oxygen Demand (COD, 58 %-60 %), Total Nitrogen (TN, 32 %-37 %), and Phosphate (PO4, 46 %-64 %) compared to TFCWs filled with normal sand. Water quality further improved after the second stage of horizontal subsurface flow CWs treatment, achieving log removals of 1.09-2.47 for total coliform and 1.89-2.09 for E. coli. With influent pharmaceutical concentrations ranging from 275 to 2000 µg/L, the zeolite-filled hybrid CWs achieved complete removal (>98 %) for ciprofloxacin, ofloxacin, erythromycin, and enrofloxacin, moderate removal (43 %-81 %) for flumequine and lincomycin, and limited removal (<8 %) for carbamazepine and diclofenac. The overall accumulation of pharmaceuticals in plant tissue and substrate adsorption accounted for only 2.3 % and 4.3 %, respectively, of the total mass removal. Biodegradation of these pharmaceuticals (up to 61 %) through microbial-mediated processes or within plant tissues was identified as the key removal pathway. For both conventional pollutants and pharmaceuticals, modified zeolite wetland media could only slightly enhance treatment without a significant difference between the two treatment groups. The final effluent from all hybrid CWs complied with Jordanian treated industry wastewater reuse standards (category III), and systems filled with raw or modified zeolite achieved over 95 % of samples meeting the highest water reuse category I. This study provides evidence of using hybrid CWs technology as a nature-based solution to address water safety and scarcity challenges.

Optimization of nitrogen source supply for enhanced biosynthesis and quality of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by extremely halophilic archaeon Haloferax mediterranei.

The extreme halophilic archaeon, Haloferax mediterranei can accumulate polyhydroxyalkanoate (PHA) from different renewable resources. To enhance the biosynthesis and quality of PHA, H. mediterranei cultivation media was optimized at different C/N ratios using glucose as the main carbon source. Three sets of media (yeast extract [YE], NH4 Cl and combination of YE and NH4 Cl) were prepared at different nitrogen concentrations to achieve C/N ratios of 9, 20, and 35, respectively. The media containing YE (organic nitrogen source) produced a higher growth rate of H. mediterranei than NH4 Cl (inorganic source) at all tested C/N ratios. The highest PHA accumulation (18.4% PHA/cell dry mass) was achieved in a media that combined YE with NH4 Cl at a C/N ratio of 20. Analysis of the produced polymers revealed the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV) with different 3-hydroxyvalerate (3HV) content. The polymers produced from YE and the combined media have greater 3HV content (10 mol%) than those polymers recovered from NH4 Cl (1.5 mol%). Resultingly, PHBHV from YE and the combined media displayed reduced melting points at 144°C. The nitrogen type/concentration was found to also have an impact on the molecular weights and polydispersity indices of the produced biopolymers. Furthermore, the tensile strengths were found to vary with the best tensile strength (14.4 MPa) being recorded for the polymer recovered from YE at C/N = 9. Interestingly, the tensile strength of PHBHV was significantly higher than petroleum-based polyethylene (13.5 MPa), making it a much more suitable bioplastic for industrial application.

A one-stage cultivation process for the production of poly-3-(hydroxybutyrate-co-hydroxyvalerate) from olive mill wastewater by Haloferax mediterranei.

Olive mill wastewater (OMW), a highly polluting waste from the olive oil industry, was utilized as sole carbon source for the production of polyhydroxyalkanoate (PHA) by extremely halophilic Haloferax Mediterranei (H. mediterranei) in a one stage cultivation step. H. mediterranei showed remarkable cell growth and tolerated the inhibitory effect of polyphenols present in medium containing 25% of OMW. H. mediterranei cultivation conditions were optimized in medium containing 15% OMW by investigating several parameters that affect the production of PHA. The highest polymer yield (0.2g/L) and PHA content (43% PHA/cell dry mass) were achieved at 37°C, 170rpm and 22% salt concentration. Analysis of the produced PHA revealed the production of copolyester poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV) containing 6.5mol% 3-hydroxyvalerate (3HV). The production of PHBHV was observed without the need for fermentation step or adding external carbon source. The PHBHV displayed reduced melting points at 140.1°C and 154.4°C when compared to homopolymer polyhydroxybutyrate.

Non-equilibrium zinc uptake onto compost particles from synthetic stormwater.

Zinc uptake onto different particle size compost was evaluated in batch and column studies using a synthetic stormwater to quantify sorption capacity and kinetics. The results showed that the pseudo equilibrium time for uptake increased from 2h to greater than 120h as the particle size of compost increased from 75µm to 6.75mm. This was due to intra-particle diffusion becoming a rate limiting process as the particle size increased. Column effluent data with 1.18mm particles could be fitted by Freundlich isotherm while that from the 4.75mm particles and a mixed particle size columns showed rate limited sorption with tailing and could not be adequately fitted using an equilibrium based isotherm. The results have established rate-limited sorption in amended filtration media due to larger particles under these flow conditions. This needs to be accounted for in the design of these filtration media and during performance modelling.

Simple models for the release kinetics of dissolved organic carbon from woody filtration media.

The mechanisms and kinetics of dissolved organic carbon (DOC) release from woody materials (pine, hardwood and compost) under non-equilibrium leaching conditions was examined through batch and column tests. Mechanistically based kinetic models (first and second order) had a low predictive power for DOC release compared to those based solely on regression (Elovitch, power law). The DOC release data showed a bi-phasic response, with an early period of rapid release (<24h) controlled by film diffusion followed by a slower rate controlled by intra-particle diffusion. After flow interruption, DOC release was primarily controlled by intra-particle diffusion; however, the specific rate parameters generally varied with each flow cycle and between different wood types.

Effect of media type and particle size on dissolved organic carbon release from woody filtration media.

Sequential batch leaching tests were used to evaluate the mass of DOC released from composted garden organics (yard waste), pine and hardwood under pseudo-equilibrium conditions. All media showed an initial rapid decline in DOC values followed by a slower rate during later time periods. Greater than 50% of the DOC leached occurred within the initial time period (<24 h). The mass of DOC leached varied significantly between the materials and to a lesser degree between different particle size ranges. The pine had the lowest leached DOC fraction (2.8-4.8 mg/g), while the hardwood (21-27 mg/g) and compost (13.6-32.7 mg/g) were significantly greater. The type and processing of the woody material incorporated into these systems can have a significant impact on the treated stormwater.