Bone regeneration after marginal bone resection in two-stage treatment of chronic long bone infection - a combined histopathological and clinical pilot study.

INTRODUCTION: In chronic bone infection, marginal bone resection avoids large and difficult to reconstruct bone defects. However, there is still a lack of knowledge on bone regeneration during chronic bone infection and bone healing capability after marginal bone resection. Therefore, the purpose of this study was to investigate the clinical and histopathological outcomes after marginal bone resection in chronic long bone infection. We hypothesized that there is a regenerative bone healing potential after marginal bone resection that results in an acceptable clinical outcome and improved pathohistological bone healing parameters during treatment. MATERIALS AND METHODS: Nine patients were treated for chronic bone infections in a two-stage manner with marginal bone resection of the infected area and the placement of an antibiotic-loaded polymethyl methacrylate (PMMA) spacer at stage one followed by bone reconstruction at stage two combined with systemic antibiotic therapy. Comparable bone samples were harvested at the border region between vital and necrotic bone area during stage one and the identical location during stage two. Control bone samples were harvested from five healthy patients without bone infection. Clinical outcome in terms of infection eradication and bone consolidation were assessed. The phenotypic changes of osteocyte and morphological changes of lacunar-canalicular network were investigated by histological and immunohistochemical staining between the two observation periods. Furthermore, expression levels of major bone formation and resorption markers were investigated by immunohistochemical and tartrate-resistant acid phosphatase (TRAP) staining. RESULTS: The clinical results with a follow-up of 12.9 months showed that eight of nine patients (88.9%) achieved bone consolidation after a planned two-stage procedure of marginal resection of necrotic bone and consecutive reconstruction. In four of the nine patients (44.4%), additional marginal debridements after stage two had to be performed. After marginal resection at stage one, the improved bone formation ability at stage two was demonstrated by significantly lower percentage of empty lacunae, significantly more mature osteocytes and higher BMP-2 positive cell density, whereas decreased resorption was indicated by significantly lower osteoclast density and RANKL/OPG ratio. In patients requiring additional debridement compared to patients without additional debridements, a significantly higher percentage of empty lacunae was found at stage one. CONCLUSION: Marginal bone resection combined with local and systemic antibiotic therapy is a feasible treatment option to avoid large bone defects as bone from the marginal resection area seems to have good regenerative potential. Despite a high revision rate of 44.4%, this technique avoids large bone resection and revisions can be done by further marginal debridements.

Rifampicin restores extracellular organic matrix formation and mineralization of osteoblasts after intracellular Staphylococcus aureus infection.

AIMS: Bone regeneration during treatment of staphylococcal bone infection is challenging due to the ability of Staphylococcus aureus to invade and persist within osteoblasts. Here, we sought to determine whether the metabolic and extracellular organic matrix formation and mineralization ability of S. aureus-infected human osteoblasts can be restored after rifampicin (RMP) therapy. METHODS: The human osteoblast-like Saos-2 cells infected with S. aureus EDCC 5055 strain and treated with 8 µg/ml RMP underwent osteogenic stimulation for up to 21 days. Test groups were Saos-2 cells + S. aureus and Saos-2 cells + S. aureus + 8 µg/ml RMP, and control groups were uninfected untreated Saos-2 cells and uninfected Saos-2 cells + 8 µg/ml RMP. RESULTS: The S. aureus-infected osteoblasts showed a significant number of intracellular bacteria colonies and an unusual higher metabolic activity (p < 0.005) compared to uninfected osteoblasts. Treatment with 8 µg/ml RMP significantly eradicated intracellular bacteria and the metabolic activity was comparable to uninfected groups. The RMP-treated infected osteoblasts revealed a significantly reduced amount of mineralized extracellular matrix (ECM) at seven days osteogenesis relative to uninfected untreated osteoblasts (p = 0.007). Prolonged osteogenesis and RMP treatment at 21 days significantly improved the ECM mineralization level. Ultrastructural images of the mineralized RMP-treated infected osteoblasts revealed viable osteoblasts and densely distributed calcium crystal deposits within the extracellular organic matrix. The expression levels of prominent bone formation genes were comparable to the RMP-treated uninfected osteoblasts. CONCLUSION: Intracellular S. aureus infection impaired osteoblast metabolism and function. However, treatment with low dosage of RMP eradicated the intracellular S. aureus, enabling extracellular organic matrix formation and mineralization of osteoblasts at later stage. Cite this article: Bone Joint Res 2022;11(5):327-341.

Implant-bone-interface: Reviewing the impact of titanium surface modifications on osteogenic processes in vitro and in vivo.

Titanium is commonly and successfully used in dental and orthopedic implants. However, patients still have to face the risk of implant failure due to various reasons, such as implant loosening or infection. The risk of implant loosening can be countered by optimizing the osteointegration capacity of implant materials. Implant surface modifications for structuring, roughening and biological activation in favor for osteogenic differentiation have been vastly studied. A key factor for a successful stable long-term integration is the initial cellular response to the implant material. Hence, cell-material interactions, which are dependent on the surface parameters, need to be considered in the implant design. Therefore, this review starts with an introduction to the basics of cell-material interactions as well as common surface modification techniques. Afterwards, recent research on the impact of osteogenic processes in vitro and vivo provoked by various surface modifications is reviewed and discussed, in order to give an update on currently applied and developing implant modification techniques for enhancing osteointegration.

Galleria mellonella as an alternative in vivo model to study bacterial biofilms on stainless steel and titanium implants

The purpose of this study was to establish an infection model of Galleria mellonella larvae as an alternative in vivo model for biofilm-associated infections on stainless steel and titanium implants. First, the model was established with sterile implants to evaluate biocompatibility. Titanium or stainless steel implants were implanted without adverse effects over the entire observation period of 5 days compared to controls and even up to the pupae and moth stage. Then, stainless steel and titanium implants contaminated with Staphylococcus aureus were implanted into larvae to mimic biofilm-associated infection. For both materials, pre-incubation of the implant with S. aureus led to significantly reduced survival of the larvae compared to sterile implants. Larvae could not be rescued by gentamicin, whereas gentamicin significantly improved the survival of the larvae in case of planktonic infection with S. aureus without an implant, confirming the typical character­istics of reduced antibiotic susceptibility of biofilm infections. Biofilm formation and various stages of biofilm maturation were confirmed by surface electron microscopy and by measuring bacterial gene expression of biofilm-related genes on contaminated implants, which confirmed biofilm formation and upregulation of autolysin (atl ) and sarA genes. In con­clusion, G. mellonella can be used as an alternative in vivo model to study biofilm-associated infections on stainless steel and titanium implants, which may help to reduce animal infection experiments with vertebrates in the future.

Strontium and bisphosphonate coated iron foam scaffolds for osteoporotic fracture defect healing.

The purpose of this work was to investigate new bone formation in macroporous iron foams coated with strontium (FeSr) or bisphosphonate (FeBiP) compared to plain iron foam (Fe) and empty defect in a critical size metaphyseal bone defect model in ovariectomized rats. 60 female rats were subjected to bilateral ovariectomy and multi-deficient diet for 3 months. A 4 mm wedge shaped metaphyseal osteotomy was created, fixed with a mini-plate and subsequently filled with Fe, FeSr, FeBiP or left empty. After 6 weeks, µCt analysis revealed a statistically significant increased bone formation at the implant interface in FeSr compared to FeBiP (p = 0.035) and Fe (p = 0.002), respectively. Increased mineralized tissue was also seen within the pores in FeSr (p = 0.023) compared to Fe. Histomorphometry revealed significantly increased bone formation at the implant interface in FeSr (p < 0.001) and FeBiP (p = 0.006) compared to plain Fe with increased osteoblast and decreased osteoclast activity in combination with increased BMP2 and decreased RANKL/OPG in immunohistochemistry. ToF-SIMS analysis showed overlapping Ca signals with Fe for both FeSr and FeBiP thereby indicating tissue in-growth into the scaffolds. In conclusion, iron foam with strontium or bisphosphonate coating are of further interest in metaphyseal fracture defects in osteopenic bone.

Functional adaptation of crustacean exoskeletal elements through structural and compositional diversity: a combined experimental and theoretical study.

The crustacean cuticle is a composite material that covers the whole animal and forms the continuous exoskeleton. Nano-fibers composed of chitin and protein molecules form most of the organic matrix of the cuticle that, at the macroscale, is organized in up to eight hierarchical levels. At least two of them, the exo- and endocuticle, contain a mineral phase of mainly Mg-calcite, amorphous calcium carbonate and phosphate. The high number of hierarchical levels and the compositional diversity provide a high degree of freedom for varying the physical, in particular mechanical, properties of the material. This makes the cuticle a versatile material ideally suited to form a variety of skeletal elements that are adapted to different functions and the eco-physiological strains of individual species. This review presents our recent analytical, experimental and theoretical studies on the cuticle, summarising at which hierarchical levels structure and composition are modified to achieve the required physical properties. We describe our multi-scale hierarchical modeling approach based on the results from these studies, aiming at systematically predicting the structure-composition-property relations of cuticle composites from the molecular level to the macro-scale. This modeling approach provides a tool to facilitate the development of optimized biomimetic materials within a knowledge-based design approach.

Ultrastructure and mineral composition of the cornea cuticle in the compound eyes of a supralittoral and a marine isopod.

The cuticle of the cornea in Crustacea is an interesting example of a composite material compromising between two distinct functions. As part of the dioptric apparatus of the ommatidia within the complex eye it forms transparent micro-lenses that should as well maintain the mechanical stability of the head capsule. We analyzed the ultrastructure and composition of the isopod cornea cuticle of the terrestrial species Ligia oceanica and the marine Sphaeroma serratum. We used a variety of tissue preparation methods, electron microscopic techniques as well as electron microprobe analysis and Raman spectroscopic imaging. The results reveal various structural adaptations that likely increase light transmission. These are an increase in the thickness of the epicuticle, a reduction of the thickness of the outer layer of calcite, a spatial restriction of pore canals to interommatidial regions, and, for S. serratum only, an increase in calcite crystal size. In both species protein-chitin fibrils within the proximal exocuticle form a peculiar reticular structure that does not occur within the cuticle of the head capsule. In L. oceanica differential mineralization results in a spherically shaped interface between mineralized and unmineralized endocuticle, likely an adaptation to increase the refractive power of the cornea maintaining the mechanical stability of the cuticle between the ommatidia. The results show that the habitat and differences in the general structure of the animal's cuticle affect the way in which the cornea is adapted to its optical function.