Mechanical properties of combined packable and high-filled flowable composite used for the fixed retainer: an in vitro study.

BACKGROUND: Clinicians often utilize both flowable and packable composites concurrently in bonding fixed retainers. Thus, this study aimed to assess the synergistic effect of these composites in the bonding process. METHODS: This in vitro study divided specimens into three groups: flowable composite (nano-hybrid, Tetric N-Flow, Ivoclar Vivadent), packable composite (nano-hybrid, Tetric N-ceram, Ivoclar Vivadent), and combined use of flowable and packable composite. Shear bond strength (SBS), adhesive remnant index (ARI), and wire pull-out resistance were compared among the groups. Statistical analyses were conducted using ANOVA and Tukey tests to compare study groups. Additionally, Chi-square and Kruskal-Wallis tests were employed to analyze the ARI index among the groups. RESULTS: ANOVA results indicated no statistically significant differences among test groups (P = 0.129) regarding SBS. However, a significant difference existed between flowable and packable composite groups (P = 0.01) regarding ARI scores. Among the study groups, flowable composite exhibited the highest frequencies of ARI scores of 1 and 2, whereas packable composite showed the highest frequency of ARI scores of 0. The combined group had higher frequencies of ARI scores of 0 and 1 compared to the flowable composite. The wire pull-out test revealed that the combined application of flowable and packable composite resulted in significantly lower detachments compared to the packable composite alone (P = 0.008). However, no significant differences were observed in the comparisons between the flowable-packable (P = 0.522) and combined-flowable (P = 0.128) groups. CONCLUSION: The combined use of flowable and packable composites for fixed retainers demonstrated adequate shear bond strength and ideal ARI scores, suggesting it as a suitable adhesive system for bonding orthodontic fixed retainers.

Comparison of the mechanical properties and surface topography of as-received and as-retrieved Copper-Nickel-Titanium arch wires: An ex-vivo study.

AIM: The mechanical and surface characteristics of Copper NiTi wires following intraoral aging in an important topic. This ex-vivo study is designed to assess the three most important mechanical properties; torsional stiffness, 3-point bending and surface hardness of the as-received Copper NiTi orthodontic archwires and compare them to the retrieved ones. MATERIAL AND METHODS: In this study, 50 round CuNiTi (0.016 inch) and 50 rectangular (0.018×0.025 inch) CuNiTi orthodontic wires (American Orthodontics, Tanzo Copper Nickel Titanium, Sheboygan, WI) were tested. The groups were as follow: 25 as-received 0.016 inch round CuNiTi archwires (group 1), 25 as-retrieved 0.016 inch round CuNiTi archwires (group 2), 25 as-received 0.018×0.025 inch rectangular CuNiTi archwires (group 3), and 25 as-retrieved 0.018×0.025 inch rectangular CuNiTi archwires (group 4). The physical properties of all of the samples were examined using Vickers hardness, bending and torsional tests. The Kolmogorov-Smirnov test was applied to assess the normal distribution of data. An independent t-test was used to compare the variables between the groups. RESULTS: The results showed that the hardness does not significantly differ between the as-received and as-retrieved archwires in both 0.016 and 0.018×0.025 inch archwires (P< 0.05). The bending test of the round wires showed that the values of the activation forces in the as-received ones were significantly higher than those of the as-retrieved (P=0.00). The torsional and bending test results of rectangular wires showed that the amounts of forces exerted from the as-retrieved archwires were significantly higher than the new archwires (P=0.00). CONCLUSIONS: Round CuNiTi archwires could be retied in the succeeding visits. However, the bending activation that declines significantly should be took into consideration. On the other hand, since bending and torsion activation of CuNiTi rectangular archwires increased after intraoral use, these wires should be retied cautiously.