A Review and Follow-Up of Uterine Smooth Muscle Tumours of Uncertain Malignant Potential (STUMP): A Case Series and Literature Review.

OBJECTIVES: to analyse the clinical-pathological characteristics, treatment, and evolution of uterine smooth muscle tumours with uncertain malignant potential (STUMP) diagnosed in the Salamanca University Hospital with the implementation of the 2014 WHO criteria. MATERIALS AND METHODS: a retrospective descriptive study of patients diagnosed with STUMP from January 2015 to March 2023 at the Salamanca University Hospital. Demographic data, preoperative clinical data, treatment, complications, therapeutic results, anatomopathological findings and recurrence time were obtained. RESULTS: a total of four patients were identified and included in the study. The mean age at diagnosis was 48 years (range 36-67). The surgical indications were abnormal uterine bleeding, compressive symptoms, and the growth of a pelvic mass suspected to be a degenerated myoma from the residual cervix after a subtotal hysterectomy 6 years earlier. In all cases, a laparotomic procedure was performed. A total hysterectomy, sub-total hysterectomy, and the excision of the cervix with STUMP localization were accomplished in two, one, and one patient, respectively. The mean diameter of the tumour pieces was 13 cm (range 8-17 cm), with a mean volume of 816 cc (range 234-1467 cc). The mean follow-up was 47 months, with no recurrence to date. CONCLUSIONS: STUMPs are a heterogeneous group of tumours with a difficult-to-predict clinical evolution. In most cases, their diagnosis is histological after performing surgery for suspected leiomyoma. Due to their low incidence, there are no specific guidelines for their treatment and control. However, considering their potential risk of recurrence and metastasis, it is advisable to maintain six-monthly controls for 5 years and then annual controls for 5 years more.

Effect of ultrasonic agitation on marginal adaptation, intratubular penetration and bonding strength of calcium-silicate-based endodontic sealers: A laboratory study.

The effect of ultrasonic activation (UA) on marginal adaptation, intratubular penetration and bond strength provided by three calcium silicate-based sealers was evaluated. Ninety-six distobuccal root canals of maxillary molars were randomly divided into 8 groups (n = 12) according to the sealer and UA application: EndoSequence BC sealer (ESBC), Sealer Plus BC (SPBC) and Bio-C Sealer (BCS), using AH Plus (AH) as a control group. The specimens were sectioned at 2, 4 and 6 mm from the apex. The data were statistically analysed using Kruskall-Wallis, Dunn, Mann-Whitney and chi-squared tests. UA improved the marginal adaptation of ESBC (6 mm), SPBC (all levels), BCS (2/4 mm) and AH (4 mm) (p < 0.05); the bond strength of SBPC (2 mm) and BCS (6 mm) were also improved (p < 0.05). The UA of endodontic silicate-based sealers improved the marginal adaptation in all levels and the bond strength of SBPC and BCS sealer.

Reproductive Health Practices in Spanish Women Who Underwent Voluntary Termination of Pregnancy.

Background: The incidence of Voluntary Termination of Pregnancy (VTP) is an important indicator of unplanned pregnancies and the differences in the functioning of contraceptive services and the effectiveness of their use. Its analysis is essential for monitoring the well-being of women and their partners. Our aim was to analyse the socio-demographic profile of women who request voluntary termination of pregnancy in the province of Salamanca, as well as their satisfaction with the intervention and its influence on their contraceptive methods. Methods: An intervention study (before-after) designed without a control group, including all women requesting a voluntary termination of pregnancy through the Salamanca Public Health System. Socio-demographic and reproductive health variables were used. After the termination of pregnancy, a satisfaction survey and analysis of consequences were carried out. Results: A total of 176 surveys were obtained. Women who underwent VTP in Salamanca were between 20 and 25 years old, had secondary education but were still studying or working, lived alone and had no children. The most commonly used contraceptive method was the condom (55%), followed by the pill (25%). The most frequent reason for termination of pregnancy was economic (47.7%). The abortion entailed a significant change in contraception. Whereas before the abortion only 34% used a hormonal method, 66% were willing to use one afterwards (p = 0.006). Conclusion: Reproductive health education needs to be improved so that couples use reliable contraceptive methods appropriately. Although women are generally satisfied with the care received during abortion, they would prefer better accessibility to the procedure and more comprehensive information about the process from a neutral stance.

Diagnostico de Chagas Congénito en el Hospital de Niños "Sor María Ludovica" / Diagnosis of Congenital Chagas in the Children's Hospital "Sor María Ludovica"

Introducción:La transmisión congénita de Trypanosoma cruzi constituye, en la actualidad, la vía que genera mayor cantidad de nuevos casos de infección aguda. El diagnóstico y tratamiento temprano aseguran una elevada probabilidad de cura parasitológica. El objetivo del trabajo fue evaluar el seguimiento de potenciales casos de Chagas Congénito, estimar la tasa de transmisión materno-fetal y la capacidad diagnóstica del microhematocrito. Materiales y métodos: Se realizó un estudio descriptivo transversal sobre hijos de mujeres con Chagas, que concurrieron al Laboratorio Central del H.I.A.E.P. Sor María Ludovica durante abril 2013-febrero 2019. Los niños fueron estudiados por microhematocrito y pruebas serológicas. Los resultados se obtuvieron del Sistema Informático de Laboratorio de Wiener®. Resultados: En el período de tiempo evaluado, fueron estudiados por microhematocrito un total de 268 niños (edad promedio= 2,35 meses), obteniéndose 16 resultados positivos. De los 252 niños con microhematocrito negativo, 58 fueron seguidos por pruebas serológicas hasta el año de vida, obteniéndose 3 resultados positivos. Se evidenció una pérdida de seguimiento serológico del 77%. La tasa de transmisión congénita estimada fue del 6,9% y el porcentaje de detección diagnóstica de la técnica directa, del 84,2%. Conclusión: La búsqueda de infección congénita en hijos de mujeres con Chagas, y su seguimiento hasta el año de vida, resulta esencial para lograr la detección y tratamiento temprano de nuevos casos. Sin embargo, la pérdida de seguimiento de potenciales casos de Chagas Congénito resulta alarmante. Esto enfatiza la necesidad de plantear estrategias sólidas para mejorar la aplicación del algoritmo diagnóstico

Introduction:Congenital Trypanosoma cruzi transmission is currently the route that generates the largest number of new cases of acute infection. Early diagnosis and treatment ensure a high probability of parasitological cure. The aim of this article was to evaluate the follow-up of possible cases of Congenital Chagas, to estimate the maternal-fetal transmission rate and the diagnostic capacity of microhematocrit. Materials and methods: A cross-sectional descriptive study was carried out on children born from Chagasic women, who attended the Central Laboratory of the H.I.A.E.P Sor María Ludovica during April 2013-February 2019. The children were studied by microhematocrit and serological tests. The results were obtained from the Wiener® Laboratory Information System. Results: In the evaluated time period, a total of 268 children (mean age = 2.35 months) were studied by microhematocrit, obtaining 16 positive results. Among the 252 children with negative microhematocrit, 58 were followed by serological tests up to one year of life, obtaining 3 positive results. A 77% loss of serological follow-up was evidenced. The estimated congenital transmission rate was 6.9% and the percentage of diagnostic detection of the direct technique was 84.2%. Conclusion: The search for congenital infection in children born from Chagasic women, and its follow-up until one year of life, is essential to achieve the early detection and treatment of new cases. However, the loss of follow-up of potential cases of Congenital Chagas is alarming. This emphasizes the need to propose solid strategies to improve the application of the diagnostic algorithm

Impact of Sepsis Flow Chip, a novelty fast microbiology method, in the treatment of bacteremia caused by Gram-negative bacilli.

OBJECTIVE: The aim of this study was to assess the impact of the information provided by the new Sepsis Chip Flow system (SFC) and other fast microbiological techniques on the selection of the appropriate antimicrobial treatment by the clinical researchers of an antimicrobial stewardship team. METHODS: Two experienced clinical researchers performed the theoretical exercise of independently selecting the treatment for patients diagnosed by bacteremia due to bacilli gram negative (BGN). At first, the clinicians had only available the clinical characteristics of 74 real patients. Sequentially, information regarding the Gram stain, MALDI-TOF, and SFC from Vitro were provided. Initially, the researchers prescribed an antimicrobial therapy based on the clinical data, later these data were complementing with information from microbiological techniques, and the clinicians made their decisions again. RESULTS: The data provided by the Gram stain reduced the number of patients prescribed with combined treatments (for clinician 1, from 23 to 7, and for clinician 2, from 28 to 12), but the use of carbapenems remained constant. In line with this, the data obtained by the MALDI-TOF also decreased the combined treatment, and the use of carbapenems remained unchanged. By contrast, the data on antimicrobial resistance provided by the SFC reduced the carbapenems treatment. CONCLUSIONS: From the theoretical model the Gram stain and the MALDI-TOF results achieved a reduction in the combined treatment. However, the new system tested (SFC), due to the resistance mechanism data provided, not only reduced the combined treatment, it also decreased the prescription of the carbapenems.

A laboratory study of the scouting ability of two reciprocating glide path instruments in mesial root canals of extracted mandibular molars.

AIM: To evaluate in a laboratory setting the performance of two reciprocating glide path systems, WaveOne Gold Glider (WO) and R-Pilot (RP), to create a glide path in mesial root canals of mandibular molars and to assess the torsional resistance of instruments after performing the glide path. METHODOLOGY: A total of 60 mesial root canals of extracted human mandibular molars were divided into two groups (n = 30) according to the glide path system to be used. The data from the volume of each canal, acquired by microcomputed tomography (micro-CT), were validated statistically for the anatomical pairing of the groups. Preparation time, frequency in gaining apical patency, plastic deformation rate of instruments, and canal transportation and centring ability were recorded and compared statistically. The torsional fatigue of the instruments after use was also evaluated. Data were analysed using Fisher's exact test and Mann-Whitney U-test with a 5% significance level. RESULTS: No significant differences were found between groups regarding the time required to perform the glide path, the frequency distributions of the canals classified as patent and the instruments with plastic deformation after use (P > 0.05). No significant differences were found between groups regarding the degree of canal transportation and centring ability at the cervical, middle and apical thirds (P > 0.05). The RP groups had significantly greater maximum torsional strength values compared with the WO groups (P < 0.05). The used WO group had greater angular deflection to fracture when compared to the new WO group (P < 0.05). A significant difference was also found in the percentage of loss of angular deflection in a comparison of the WO group with the RP group (P < 0.05). CONCLUSIONS: The WO and RP instruments performed the same in terms of preparation time, plastic deformation, gaining apical patency, degree of canal transportation and centring ability. The RP instruments had greater torsional strength, less angular deflection and lower percentage of loss in angular deflection than the WO. The used WO group had the greatest angular deflection values.

Shaping ability of hand, rotary and reciprocating files in primary teeth: a micro-CT study in vitro.

PURPOSE: Compare canal transportation and dentin removal using micro computed tomography (micro-CT) and measure instrumentation time in the root canal preparation of primary molars using K-files, ProDesign Logic and Reciproc files. METHODS: A representative sample of 81 root canals of primary molars was randomised into three groups: K-files (#15-40), ProDesign Logic (#25) and Reciproc (R25). A single-trained operator prepared all root canals. A standardised micro-CT evaluation was performed before and after instrumentation using the CTan® program. Instrumentation time was also recorded. Statistical analysis involved one-way ANOVA, Tukey's post hoc test, Kruskal-Wallis test and Dunn's test, considering a 5% level of significance. RESULTS: Reciproc led to more canal transportation than K-files and ProDesign Logic (p < 0.001) in middle third, whereas K-files led to the most canal transportation in the apical third (p = 0.017). ProDesign Logic and Reciproc removed less dentin on the opposite side of the root curvature in the apical third compared to K-files (p = 0.008). Instrumentation time was better with ProDesign Logic and Reciproc than K-files (p < 0.001). CONCLUSION: ProDesign Logic demonstrated good results with regard to canal transportation and required less instrumentation time in primary molars. Reciproc and K-files led to the most canal transportation in the middle and apical third, respectively.

Giant Isolated Omphalocele: Role of Prenatal Diagnosis in Prognostic Asessment and Perinatal Management.

Omphalocele is a congenital malformation of the abdominal wall consisting of a protrusion of the abdominal contents at the base of the umbilical cord. It has a high association with genetic and structural defects; however, if the latter is ruled out, its prognosis improves significantly. Prenatal diagnosis has a key role in this condition as omphalocele can be diagnosed by ultrasound in the first trimester scan, enabling a coordinated approach strategy to achieve the best perinatal results. We present a case report of a pregnant patient with a fetus having a giant omphalocele in which prenatal diagnosis played a decisive role, allowing the coordination of a multidisciplinary team, which was crucial in the immediate care of the newborn.

Lamotrigine induced Brugada-pattern in a patient with genetic epilepsy associated with a novel variant in SCN9A.

BACKGROUND: A 30-year-old man presented with intellectual disability associated with epilepsy. The epilepsy was initially treated with sodium valproate and since he was 28 years-old with lamotrigine. With the addition of lamotrigine, a pattern of Brugada syndrome appeared on the electrocardiogram. The family history was positive for epilepsy from the mothers side, who had never been treated with lamotrigine. OBJECTIVE: Determine the genetic cause of the intellectual disability, epilepsy and Brugada syndrome of the patient and try to establish a possible correlation between the genetic background and the Brugada syndrome pattern under lamotrigine treatment. METHODS: A standard karyotype, array comparative genomic hybridization and two different NGS panels have done to the index case to identify the genetic causes of the intellectual disability, epilepsy and Brugada syndrome pattern. RESULTS: Genetic analyses in the family identified a de novo duplication of 1.3 Mb in 8p21.3 as well as two novel heterozygous rare variants in SCN9A and AKAP9 genes, both inherited from the mother. CONCLUSION: We hypothesize that in this family the SCN9A variant was responsible for the epileptic syndrome. In addition, given that SCN9A is lightly expressed in the heart tissue, we postulate that this SCN9A variant, alone or in combination with AKAP9 variant, might be responsible for the Brugada pattern when challenged by lamotrigine.

Effect of larger apical size on the quality of preparation in curved canals using reciprocating instruments with different heat thermal treatments.

AIM: To evaluate the influence of larger apical canal enlargement in curved canals using reciprocating systems subjected to various heat treatments. METHODOLOGY: Ninety mandibular premolars with root curvatures ranging from 20° to 30° were selected and scanned by microcomputed tomography (micro-CT) before and after root canal preparation with reciprocating systems (n = 30): Reciproc Blue (RB size 25, .08 taper and size 40, .06 taper; VDW, Munich, Germany), WaveOne Gold (WOG size 25, .07 taper and size 35, .06 taper; Dentsply Sirona, Ballaigues, Switzerland) and ProDesign R (PDR size 25, .06 taper and size 35, .05 taper; Easy Dental Equipment, Belo Horizonte, Brazil). Canal transportation, untouched areas, and apical and total root canal volumes were measured. Statistical analysis was performed with the nonparametric Kruskal-Wallis and Dunn's tests and a significance level set at 5%. RESULTS: The between-group comparison revealed no significant difference in untouched areas, canal transportation, and apical root canal volume among the groups (P > 0.05). However, WOG size 35, .06 taper was associated with a significant increase in the percentage of total canal volume in comparison to the PDR size 35, .05 taper (P < 0.05). The within-group comparison revealed a significant decrease in untouched areas, increase in apical and total root canal volume for all groups when using a larger instrument (P < 0.05). There was no significant difference in transportation among the groups and when a larger apical preparation was created (P > 0.05). CONCLUSIONS: Larger apical enlargement of curved canals was associated with a decrease in untouched areas, an increase in root canal volume and maintenance of canal trajectory. In addition, all systems were safe and provided similar root canal shapes.

The ability of three nickel-titanium mechanized systems to negotiate and shape MB2 canals in extracted maxillary first molars: a micro-computed tomographic study.

AIM: To evaluate the influence of three engine-driven NiTi file systems manufactured from different NiTi alloys for the preparation of second mesiobuccal (MB2) canals in extracted maxillary first molars using a micro-computed tomographic (micro-CT) scanner. METHODOLOGY: Thirty maxillary molars with two canals in the mesiobuccal root were selected and randomly divided into three groups (n = 10): Reciproc [REC; size 25, .08 taper; VDW, Munich, Germany], ProDesign R [PDR; size 25, .06 taper; Easy, Belo Horizonte, Brazil] and Mtwo [MO; size 25, .06 taper; VDW, Munich, Germany]. Before and after root canal preparation of the MB2 canal, the teeth were scanned using a micro-CT to evaluate canal transportation, centring ability, dentine thickness and volume change. The working time to achieve working length was also evaluated. All parameters were compared statistically using the Kruskal-Wallis and Dunn test for multiple comparisons, with a significance level of 5%. RESULTS: There was no significant difference amongst the groups regarding canal transportation and centring ability (P > 0.05). However, the PDR size 25, .06 taper group had significantly lower canal volume and volume of dentine removal compared with a MO size 25, .06 taper and REC size 25, .08 taper (P < 0.05). A root perforation was detected in MO size 25, .06 taper and REC size 25, .08 taper groups, respectively. Regarding the working time, the PDR size 25, .06 taper required a significantly longer time to achieve working length than MO size 25, .06 taper and REC size 25, .08 taper (P < 0.05). CONCLUSIONS: All NiTi systems had similar canal transportation, centring ability and increase in apical volume after preparation of MB2 canals. However, the PDR size 25, .06 taper had less volume of dentine removal, absence of root canal perforation and required a longer time to accomplish the root canal preparation.

Evaluation of apical transportation and centring ability of five thermally treated NiTi rotary systems.

AIM: To evaluate apical transportation and centring ability during root canal preparation in mesial root canals of mandibular molars associated with ProTaper Gold (PTG), ProDesign S (PDS), Hyflex CM (HCM), Hyflex EDM and ProDesign Logic (PDL). METHODOLOGY: Sixty mandibular first molars with two separate canals in the mesial root were selected after root anatomy pairing by microcomputed tomography (microCT). The teeth were randomly divided into five groups (n = 24); the root canal volume was calculated to ensure sample homogeneity. All the root canals were prepared up to size 25 in accordance with the instructions of each rotary system manufacturer. After root canal preparation, the teeth were scanned by microCT to analyse apical transportation, root canal centralization and the pre- and post-preparation root canal volume at the apical and cervical levels. Kruskal-Wallis and Dunn tests were used for comparisons amongst groups for transportation values. For volume changes, the parametric ANOVA and Tukey's tests were used RESULTS: There were no significant differences in apical transportation amongst the rotary systems (P > 0.05). All the systems created apical transportation; values ranging from 0.031 mm (PDL) to 0.072 mm (PTG), and enlargements between 39% (HCM) and 91.1% (PDS) were observed. In relative to cervical transportation, significant differences were observed amongst the systems (P < 0.05). Mean transportation values between 0.07 mm (HCM) and 0.172 mm (PTG) were found, with enlargements between 35.4% (HCM) and 51.5% (PDS). CONCLUSION: All the thermally treated systems resulted in similar apical transportation. In the cervical region, the Hyflex CM and Prodesign Logic systems were associated with more centred preparations.

Torsional fatigue resistance of pathfinding instruments manufactured from several nickel-titanium alloys.

AIM: To evaluate the torsional properties of pathfinding nickel-titanium (NiTi) rotary instruments manufactured from several NiTi alloys, ProGlider (M-wire), Hyflex GPF (conventional NiTi Wire and controlled memory wire), Logic (conventional NiTi wire and controlled memory wire) and Mtwo (conventional NiTi wire). METHODOLOGY: A total of 56 NiTi instruments from Glidepath rotary systems (n = 8) were used: Logic (size 25, .01 taper), Logic CM (size 25, .01 taper), ProGlider (size 16, .02 taper), Hyflex GPF (size 15, .01 taper), Hyflex GPF CM (size 15, .02 taper; size 20, .02 taper) and Mtwo (size 10, .04 taper). The torsion tests were performed based on ISO 3630-1 (1992). Three millimetres of each instrument tip was clamped to a small load cell by a lever arm linked to the torsion axis. Data were analysed using a one-way analysis of variance (anova) and Tukey test with a significance level at a = 5%. RESULTS: The Logic size 25, .01 taper had significantly higher torsional strength values (P < 0.05). The ProGlider was significantly different when compared with Hyflex GPF size 15, .01 taper and size 15, .02 taper (P < 0.05). The Logic CM size 25, .01 taper had significantly higher torsional strength than Hyflex GPF size 15, .01 taper and size 15, .02 taper (P < 0.05). No difference was found amongst Mtwo size 10, .04 taper and Hyflex GPF groups (size 15, .01 taper; size 15, .02 taper; size 20, .02 taper). In relation to the angle of rotation, Logic CM size 25, .01 taper and Hyflex GPF size 15, .01 taper had the highest angle values (P < 0.05). The ProGlider had the lowest angle values in comparison with all the groups (P < 0.05) followed by Mtwo size 10, .04 taper. The Logic size 25, .01 taper had significantly higher angle of rotation values than ProGlider and Mtwo size 10, .04 taper (P < 0.05). CONCLUSION: The Logic size 25, .01 taper instrument made of conventional NiTi alloy had the highest torsional strength of all instruments tested. In addition, the ProGlider instrument manufactured from M-Wire alloy had the lowest angle of rotation to fracture in comparison with the other instruments.

Effects of farm management practices and transport duration on stress response and meat quality traits of suckling goat kids.

Studies aimed to assess up to what extent farming and transport previous to slaughtering might affect physiology and meat quality in young goat kids are needed, with the ultimate purpose of promoting practices that minimize stress in these animals. In this regard the effects of on-farm management and transport duration on some physiological responses and meat quality parameters in goat kids were assessed. Two farms representing 'high' and 'low' welfare-friendly management practices were selected. In total, 32 suckling kids were withdrawn from each farm, transported by road for 2 or 6 h, and then slaughtered. Blood samples were collected both on-farm and in the slaughterhouse, and biochemistry, cell counts and haematocrit were determined. After slaughtering, carcass quality parameters were measured. Longissimus dorsi muscle was dissected and pH, colour parameters, water holding capacity and shear force were measured throughout 8-day ageing period. Results indicate that, regardless its duration, transport caused significant effects on some blood parameters suggesting stress in live animals, like glucose, cortisol or creatine kinase. Despite the marked stress status in animals, this condition was not decisively reflected on L. dorsi quality parameters, but some effects were observed regarding fat cover in carcasses and colour parameters. The results suggest that postmortem changes throughout ageing were more decisive in terms of meat quality than stressful management either on-farm or during transport.