Gas sensing properties of hematite nanoparticles synthesized via different techniques.

The synthesis techniques used for metal oxide semiconductors strongly influence their chemical, physical and gas sensing characteristics. In this context, hematite (α-Fe2O3) nanoparticles (NPs) were synthesized using two different techniques, namely, sol-gel (named HSG) and Pechini sol-gel (named HPSG). The average crystallite size and surface area were 15 nm and 76 m2 g-1 and 20 nm and 57 m2 g-1 for HPSG and HSG, respectively. Morphological studies showed that the HSG material was composed of ellipsoid-shaped particles, while the HPSG material had peanut-shaped particles with open pores and channels. The comparison between the sensing performances of HPSG and HSG toward ethanol indicated HPSG to be a better sensing material for ethanol detection. The HPSG sensor exhibited a response of 12 toward 500 ppm ethanol at 250 °C, a fast response time of 5 s and excellent selectivity. The enhanced characteristics were mainly related to the peculiar morphology with a porous nature, which led to more gas adsorption and diffusion. In addition to shape influence, the size of NPs also has an effect on the gas sensing performance. In fact, a decrease in the crystallite size led to an increase in the surface area of the material where the gas molecule-sensing layer interaction took place. The increase in the surface area created more interaction sites, and thus the sensitivity was improved. From these results, the HPSG sensor can be regarded as a promising candidate for ethanol detection.

Preparation and characterization of various PVPylated divalent metal-doped ferrite nanoparticles for magnetic hyperthermia.

There is an incessant demand to keep improving on the heating responses of polymeric magnetic nanoparticles (MNPs) under magnetic excitation, particularly in the pursuit for them to be utilized for clinical hyperthermia applications. Herein, we report the fabrication of a panel of PVP-capped divalent metal-doped MFe2O4 (M ≅ Co, Ni, Zn, Mg, and Sn) MNPs prepared via the Ko-precipitation Hydrolytic Basic (KHB) methodology and assess their magneto-thermal abilities. The physiochemical, structural, morphological, compositional, and magnetic properties of the doped ferrites were fully characterized using various techniques mainly TEM, XRD, EDX, FTIR, and VSM. The obtained doped MNPs exhibited stabilized quasi-spherical sized particles (10-17 nm), pure well-crystallized cubic spinel phases, and high saturation magnetizations (Ms = 26-81 emu g-1). In response to a clinically-safe alternating magnetic field (AMF) (f = 332.8 kHz and H = 170 Oe), distinctive heating responses of these doped ferrites were attained. Hyperthermia temperatures of 42 °C can be reached very fast in only ∼5 min, with heating temperatures slowly increasing to reach up to 55 °C. The highest heating performance was observed for PVP-NiFe2O4 and the lowest for PVP-Sn-doped NPs (SAR values: PVP-NiFe2O4 > PVP-CoFe2O4 > PVP-ZnFe2O4 > PVP-MgFe2O4 > PVP-SnFe2O4). This trend was found to be directly correlated to their observed magnetic saturation and anisotropy. Heating efficiencies and specific SAR values as functions of concentration, frequency, and amplitude were also systematically investigated. Finally, cytotoxicity assay was conducted on aqueous dispersions of the doped ferrite NPs, proving their biocompatibility and safety profiles. The PVPylated metal-doped ferrite NPs prepared here, particularly Ni- and Co-doped ferrites, are promising vehicles for potential combined magnetically-triggered biomedical hyperthermia applications.

Investigating Fe-doped Ba0.67Ni0.33Mn1-xFexO3 (x = 0, 0.2) ceramics: insights into electrical and dielectric behaviors.

This study investigates the characteristics of the Ba0.67Ni0.33Mn1-xFexO3 perovskite compound, focusing on its structural and electrical aspects under varying Fe doping levels at the Mn-site (x = 0, 0.2). X-ray diffraction patterns confirm the material's consistent structure, with Fe3+ ions substituting Mn3+ ions while maintaining their identical ionic radius. Nano-crystallinity studies reveal single-phase crystallization in the orthorhombic structure with space group Imma. Samples are prepared through conventional solid-state sintering. The Williamson-Hall method calculates crystallite sizes, averaging 37 nm for x = 0 and 33 nm for x = 0.2. Electrical properties are examined using complex impedance spectroscopy at different temperatures and frequencies. Techniques such as energy dispersive X-ray spectroscopy (EDX) and scanning electron microscopy (SEM) assess chemical composition. Activation energy values increase from 0.138 eV for x = 0 to 0.171 eV for x = 0.2, leading to reduced dc conductivity across the investigated temperature range. Dielectric permittivity enhances proportionally with increasing Fe doping. Variations in impedance profiles reveal a relaxation phenomenon. A circuit model, Rg + (Rgb//CPEgb), elucidates impedance data. This study illuminates the interplay between Fe doping, activation energy, and electrical conductivity in Ba0.67Ni0.33Mn1-xFexO3 perovskite, offering insights applicable to electronic and energy-related devices. Perovskite-based nanomaterials have diverse environmental applications, including solar cells, light-emitting devices, transistors, sensors, and energy storage.

Ammonia gas sensors based on undoped and Ca-doped ZnO nanoparticles.

Due to its large use in different industrial sectors, high toxicity, and corrosion, the demand for sensing techniques towards ammonia gas has become urgent. In this study we report on the sensing performances of a conductometric sensor for NH3 gas based on Ca-doped ZnO nanoparticles with different calcium concentrations (0, 1, and 3 at%) synthesized using the sol-gel process under supercritical dry conditions of ethanol. All samples were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier-transform infrared (FTIR) spectroscopy. Pure and Ca-doped ZnO are polycrystalline and well crystallized in the hexagonal wurtzite structure. TEM images revealed that pure ZnO is composed of spherical particles with dimensions in the nanometer range. Larger particles were observed after the incorporation of Ca ions. The average crystallite size, estimated by the Williamson-Hall method, was 43, 80, and 96 nm for pure, Ca-1 at% and Ca-3 at%, respectively. Furthermore, FTIR spectroscopy was used to prove the formation of ZnO and the incorporation of calcium ions in the Ca-doped ZnO samples. The gas sensing performances towards ammonia gas clearly ameliorated after the addition of Ca ions in the ZnO structure. The gas response to NH3, R0/Rg, of the 1% Ca-doped ZnO sensor reached a value of 33 for 4000 ppm of ammonia at T = 300 °C with good selectivity compared to other gases such as CO, CO2, and NO2. The response and recovery times were 5 s and 221 s, respectively. The reported good sensing performances indicate the potential application of Ca-doped ZnO as a sensor material for ammonia detection.

Assessing the Heat Generation and Self-Heating Mechanism of Superparamagnetic Fe3O4 Nanoparticles for Magnetic Hyperthermia Application: The Effects of Concentration, Frequency, and Magnetic Field.

Magnetite nanoparticles (MNPs) exhibit favorable heating responses under magnetic excitation, which makes them particularly suited for various hyperthermia applications. Herein, we report the detailed self-heating mechanisms of MNPs prepared via the Ko-precipitation Hydrolytic Basic (KHB) methodology. The as-prepared MNPs were fully characterized using various spectroscopic techniques including transmission electron microscopy (TEM), dynamic light scattering (DLS), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), and vibrating sample magnetometry (VSM). MNPs exhibited stable 15 nm quasi-spherical small-sized particles, pure crystalline cubic Fe3O4 phases, high saturation magnetizations (Ms = ~40 emu·g-1), and superparamagnetic behavior. In response to alternating magnetic fields (AMFs), these MNPs displayed excellent self-heating efficiencies with distinctive heating responses, even when minimal doses of MNPs were used. Heating efficacies and specific absorption rate (SAR) values as functions of concentration, frequency, and amplitude were systematically investigated. Remarkably, within only a few minutes, MNPs (2.5 mg/mL) showed a rapid dissipation of heat energy, giving a maximum intrinsic loss power (ILP) of 4.29 nHm2/kg and a SAR of 261 W/g. Hyperthermia temperatures were rapidly reached in as early as 3 min and could rise up to 80 °C. In addition, Rietveld refinement, Langevin, and linear response theory (LRT) models were studied to further assess the magnetic and heating mechanisms. The LRT model was used to determine the Néel relaxation time (τR = 5.41 × 10-7 s), which was compared to the Brownian relation time value (τB = 11 × 10-7 s), showing that both mechanisms are responsible for heat dissipated by the MNPs. Finally, the cytotoxicity assay was conducted on aqueous dispersions of MNPs, indicating their biocompatibility and low toxicity. Our results strongly suggest that the as-prepared Fe3O4 MNPs are promising vehicles for potential magnetically triggered biomedical hyperthermia applications.

Effective Removal of Methylene Blue from Simulated Wastewater Using ZnO-Chitosan Nanocomposites: Optimization, Kinetics, and Isotherm Studies.

Successful synthesis of ZnO-chitosan nanocomposites was conducted for the removal of methylene blue from an aqueous medium. Remarkable performance of the nanocomposites was demonstrated for the effective uptake of the dye, thereby achieving 83.77, 93.78 and 97.93 mg g-1 for the chitosan, 5 wt.% ZnO-Chitosan and 10 wt.% ZnO-Chitosan, respectively. The corresponding adsorption efficiency was 88.77, 93.78 and 97.95 for the chitosan, 5 wt.% ZnO-Chitosan and 10 wt.% ZnO-Chitosan, respectively. Upon regeneration, good reusability of the nanocomposites was manifested for the continuous removal of the dye up to six consecutive cycles. The adsorption process was kinetically described by a pseudo-first order model, while the isotherms were best fitted by the Langmuir model.

Maghemite (γ-Fe2O3) and γ-Fe2O3-TiO2 Nanoparticles for Magnetic Hyperthermia Applications: Synthesis, Characterization and Heating Efficiency.

In this report, the heating efficiencies of γ-Fe2O3 and hybrid γ-Fe2O3-TiO2 nanoparticles NPs under an alternating magnetic field (AMF) have been investigated to evaluate their feasible use in magnetic hyperthermia. The NPs were synthesized by a modified sol-gel method and characterized by different techniques. X-ray diffraction (XRD), Mössbauer spectroscopy and electron microscopy analyses confirmed the maghemite (γ-Fe2O3) phase, crystallinity, good uniformity and 10 nm core sizes of the as-synthesized composites. SQUID hysteresis loops showed a non-negligible coercive field and remanence suggesting the ferromagnetic behavior of the particles. Heating efficiency measurements showed that both samples display high heating potentials and reached magnetic hyperthermia (42 °C) in relatively short times with shorter time (~3 min) observed for γ-Fe2O3 compared to γ-Fe2O3-TiO2. The specific absorption rate (SAR) values calculated for γ-Fe2O3 (up to 90 W/g) are higher than that for γ-Fe2O3-TiO2 (~40 W/g), confirming better heating efficiency for γ-Fe2O3 NPs. The intrinsic loss power (ILP) values of 1.57 nHm2/kg and 0.64 nHm2/kg obtained for both nanocomposites are in the range reported for commercial ferrofluids (0.2-3.1 nHm2/kg). Finally, the heating mechanism responsible for NP heat dissipation is explained concluding that both Neel and Brownian relaxations are contributing to heat production. Overall, the obtained high heating efficiencies suggest that the fabricated nanocomposites hold a great potential to be utilized in a wide spectrum of applications, particularly in magnetic photothermal hyperthermia treatments.