Optimization of Pseudomonas aeruginosa isolated for bioremediation from Ha'il region of Saudi Arabia.

Majority of dyes are toxic to all the living organisms and inherently resistant to microbial degradation. Hence, decolorization and degradation of textile dye methyl red were evaluated using isolated bacterial strain Pseudomonas aeruginosa (P. aeruginosa). Methyl red dye decolorization by P. aeruginosa with respect to various parameters was optimized. Data shows that maximum possible decolorization was seen at 50 ppm dye concentration, 1400 mg/l glucose concentration, 700 mg/l sodium chloride (NaCl) concentration, pH 9, temperature 38°C, 1000 mg/l urea concentration P. aeruginosa AM-1 strain. The highest percent (91.1%) of bioremediation was achieved at 40 ppm dye concentration in Allium cepa test. These findings suggest P. aeruginosa strain (AM-1) has the potential to be used in the biological treatment of highly toxic dye which is main constituent of dyeing mill effluents due to its high decolorization activity with simple conditions. Strain AW-1 strain also has potential to bioremediate other wastewater containing methyl red dye.

Bioremediation potential of Pseudomonas fluorescens strain isolated from the Ha'il region of Saudi Arabia.

Increased amounts of toxicants may cause sever health issues in humans as well as in aquatic life. Scientists are developing new technologies to combat these problems. Biological methods of detoxification are always beneficial for the environment. Pseudomonas fluorescens is known for its detoxification capacity. In this study Pseudomonas fluorescens stains were isolated from different locations of the Ha'il region, Saudia Arabia. The microbial strain AM-1 displayed resistance to heavy metals (Cr6+, Ni2+, Cd2+, Pb2+) and pesticides (BHC, 2,4-D, Mancozeb) at pollutant levels typical of highly contaminated areas. Additionally, AM-1 exhibited substantial detoxification potential, reducing toxicity by 40.67% for heavy metals and 47.4% for pesticides at 3x concentrations. These findings suggest that the AM-1 strain supports environmental remediation and pollution mitigation. Atomic absorption spectrometry (AAS) results exhibited bioremediation efficiency for metals Cr6+, Ni2+, and Pb2+ using immobilized cells of P. fluorescens AM-1 isolate, estimated to be 60.57%, 68.4%, and 53.93% respectively. These findings show that AM-1 strain has a potential role in bioremediation of water pollutants and may have future implications in wastewater treatment.

Biodegradable composite films based on mucilage from Opuntia ficus-indica (Cactaceae): Microstructural, functional and thermal properties.

This study evaluated the feasibility of using cactus mucilage (CM) to elaborate biobased composite films blended with styrene-butadiene rubber latex (SBL). The CM was extracted and precipitated with ethanol (CMET) and isopropanol (CMIS). Mucilage-based films were formulated using three levels of mucilage (4, 6, and 8 wt%). The microstructure, thickness, moisture content, density, water contact angle, water vapor permeability, film solubility, thermal stability, and toughness of mucilage films blended with SBL (SBL/CMET and SBL/CMIS) were measured. The properties of mucilage-based films varied systematically, depending on the concentration of mucilage. The addition of SBL to CM film produces compatible, hydrophobic, flexible, and stiffer films with low moisture contents and good barrier properties. The mucilage film incorporated with 6 wt% CMET and CMIS reached the highest Young's modulus of 1512 ± 21 and 1988 ± 55 MPa, respectively. The DSC of produced films reveals that the Tg of SBL/CMIS is lower than that of SBL/CMIS. The synthesized films were structurally stable at high temperatures. The biodegradability of the composite films buried in the ground shows that the produced films are 100 % biodegradable after 40 days. Thus, CM blended with SBL can benefit specific applications, especially food packaging.

A comprehensive factorial design study of variables affecting CaCO3 scaling under magnetic water treatment.

Magnetic water treatment (MWT) could be an interesting alternative to chemical treatment to prevent scaling and has been used as an antiscaling treatment for domestic and industrial equipment. A two level-three factor (2(3)) full factorial design was used to evaluate the effects of pH (6-7.5), flow rate (0.54-0.94) and application of a magnetic field on the induction time (IT), total precipitation (TP) rate and homogeneous precipitation (HP) rate of calcium carbonate (CaCO3) scale from hard water. The experimental results and statistical analysis show that the pH, flow rate and interaction between pH and magnetic field have negative effects on IT response. In the case of TP rate response, the magnitude of the main influence is attributed to the magnetic field, followed by pH value and their interaction. Flow rate and pH value have a negative effect on HP rate response, but their interaction has a positive effect. Within these factor ranges, these studied responses predicted by the models were in good agreement with the experimental values. The coefficient of determination (R(2)) for reduction time, TP ratio and HP ratio were 97.8%, 99.12% and 99.92%, respectively. These results were analyzed statistically using Minitab 15.