Cake Compressibility Analysis of BPOME from a Hybrid Adsorption-Microfiltration Process.

This study investigates the utility of a hybrid adsorption-membrane process for cake compressibility evaluation of biotreated palm oil mill effluent (BPOME). A low-cost empty fruit bunch (EFB) based powdered activated carbon (PAC) was employed for the upstream adsorption process with operation conditions of 60 g/L PAC dose, 68 min mixing time, and 200 rpm mixing speed to reduce the feed-water strength and alleviate probable fouling of the membranes. Two polyethersulfone microfiltration (MF) membranes of 0.1 and 0.2 µm pore sizes were investigated under constant transmembrane pressures (TMP) of 40, 80, and 120 kPa. The compressibility factors (z), which was obtained from the slopes of power plots (function of specific cake resistance (α) and pressure gradient) were evaluated. The z values of 0.32 and 0.52, respectively obtained, for the 0.1 and 0.2 µm MF membranes provided compressible and stable z values as observed from their power plots. Besides, these membranes were found suitable for the measurement of z since the results are in consonance with the established principle of cake compressibility. Moreover, the upstream adsorption mitigated the clogging of the membranes which ultimately led to moderate resistances and cake compressibility. These are indications that with the secondary cake filtration, a sustainable flux can be achieved during BPOME filtration. The membranes exhibited close to 100% restoration after cleaning.

Technical feasibility study of a low-cost hybrid PAC-UF system for wastewater reclamation and reuse: a focus on feedwater production for low-pressure boilers.

This study has applied the concept of the hybrid PAC-UF process in the treatment of the final effluent of the palm oil industry for reuse as feedwater for low-pressure boilers. In a bench-scale set-up, a low-cost empty fruit bunch-based powdered activated carbon (PAC) was employed for upstream adsorption of biotreated palm oil mill effluent (BPOME) with the process conditions: 60 g/L dose of PAC, 68 min of mixing time and 200 rpm of mixing speed, to reduce the feedwater strength, alleviate probable fouling of the membranes and thus improve the process flux (productivity). Three polyethersulfone ultrafiltration membranes of molecular weight cut-off (MWCO) of 1, 5 and 10 kDa were investigated in a cross-flow filtration mode, and under constant transmembrane pressures of 40, 80, and 120 kPa. The permeate qualities of the hybrid processes were evaluated, and it was found that the integrated process with the 1 kDa MWCO UF membrane yielded the best water quality that falls within the US EPA reuse standard for boiler-feed and cooling water. It was also observed that the permeate quality is fit for extended reuse as process water in the cement, petroleum and coal industries. In addition, the hybrid system's operation consumed 37.13 Wh m-3 of energy at the highest applied pressure of 120 kPa, which is far lesser than the typical energy requirement range (0.8-1.0 kWh m-3) for such wastewater reclamation.