Lower Limb Muscles' Activation during Ascending and Descending a Single Step-Up Movement: Comparison between In water and On land Exercise at Different Step Cadences in Young Injury-Free Adults.

(1) Background: Forward step-up (FSU) simulates the stance phase in stair ascension. With the benefits of physical properties of water, aquatic FSU exercise may be more suitable for patients with lower limb weakness or pain. The purpose of this study is to investigate the effect of progressive steps per min on the surface electromyography (sEMG) of gluteus maximus (GM), biceps femoris (BF), rectus femoris (RF), and gastrocnemius (GA), when performing FSU exercise with different steps per min in water and on land. (2) Methods: Participants (N = 20) were instructed to perform FSU exercises at different steps per min (35, 60, and 95 bpm) in water and on land. The sEMG of the tested muscles were collected. The percentage maximum voluntary isometric contraction (%MVIC) of GM, RF, GA and BF at different environments and steps per min was compared. (3) Result: There was a statistically significant difference of %MVIC of RF at all steps per min comparisons regardless of the movement phases and environments (p < 0.01, except for descending phases of 35 bpm vs. 60 bpm). All tested muscles showed a statistically significant lower muscle activation in water (p < 0.05) (4) Conclusion: This study found that the %MVIC of the tested muscle in both investigated environments increase as steps per minute increases. It is also found that the movement pattern of FSU exercise activates RF the most among all the tested muscles. Muscle activation of all tested muscles is also found to be smaller in water due to buoyancy property of water. Aquatic FSU exercise might be applicable to patients with lower limb weakness or knee osteoarthritis to improve their lower limb strength.

Spectrally resolved polarization angle across the motional Stark effect spectrum.

A new diagnostic technique has been developed that couples a spectrometer and an image-intensified camera into the traditional motional Stark effect (MSE) system on DIII-D. The image-intensified camera syncs with the photo-elastic modulators to spectrally resolve the Stokes parameters across the Stark multiplet. Polarization dependent phase shift, likely from a plasma facing mirror, leads to the spectropolarimeter measuring a variation in the polarization angle across the MSE spectrum of ∼8°.

Laser calibration of the DIII-D coherence imaging system.

In this paper, we describe an in situ calibration technique for Coherence Imaging Spectroscopy (CIS) that measures 2-D images of ion flows on DIII-D. A low power CW diode laser that is tuneable in the range 464-468 nm along with a precision wavemeter (10-5 nm resolution) is used to characterize the interferometer phase as a function of wavelength in the region of C iii (465 nm) and He ii (468 nm). The interferometer is stabilized both mechanically and thermally to minimize drift during the calibration. Optical stirring and an integration sphere are used to obtain spatially uniform calibration images. The quality of the calibration data enables a measurement of phase versus wavelength over approximately 10 fringes of the interferometer. These coefficients can also be related to the geometry of the optics and the birefringent crystal of the interferometer. On DIII-D, the integration sphere with the laser light is inserted into the CIS optical system between shots and the laser image and wavelength are automatically recorded, providing a zero velocity reference.

Tomographic analysis of tangential viewing cameras (invited).

Many tokamaks now use visible light cameras to observe plasma-wall interactions and integrated line emission. The DIII-D coherence imaging spectroscopy diagnostic cameras image interferograms that encode line integrated velocity. By modeling the 2D camera image pixels as line of sight integrals through an axisymmetric discrete grid, it is possible to do tomographic analysis to determine the local plasma line emissivity and parallel velocity. Methods to solve the inverse problem posed by these tangential viewing cameras are presented. The inversion begins with calculation of the sparse response matrix that encompasses all the geometry and diagnostic information and reduces the process of image formation to a sparse matrix-vector multiply. This work includes techniques for determining the detailed geometry of the camera views and methods for handling physical quantities that vary spatially. Additionally, the size of the response matrix has driven the development of capability to distribute the coarse parallel calculation across a heterogeneous cluster of computers on the Energy Sciences Network. Iterative techniques are then used to solve the sparse matrix-vector linear system.

Verification of Doppler coherence imaging for 2D ion velocity measurements on DIII-D.

Coherence Imaging Spectroscopy (CIS) has emerged as a powerful tool for investigating complex ion phenomena in the boundary of magnetically confined plasma devices. The combination of Fourier-transform interferometry and high-resolution fast-framing cameras has made it possible to make sensitive velocity measurements that are also spatially resolved. However, this sensitivity makes the diagnostic vulnerable to environmental effects including thermal drifts, vibration, and magnetic fields that can influence the velocity measurement. Additionally, the ability to provide an absolute calibration for these geometries can be impacted by differences in the light-collection geometry between the plasma and reference light source, spectral impurities, and the presence of thin-films on in-vessel optics. This paper discusses the mitigation of these effects and demonstration that environmental effects result in less than 0.5 km/s error on the DIII-D CIS systems. A diagnostic comparison is used to demonstrate agreement between CIS and traditional spectroscopy once tomographic artifacts are accounted for.

E×B Flux Driven Detachment Bifurcation in the DIII-D Tokamak.

A bifurcative step transition from low-density, high-temperature, attached divertor conditions to high-density, low-temperature, detached divertor conditions is experimentally observed in DIII-D tokamak plasmas as density is increased. The step transition is only observed in the high confinement mode and only when the B×∇B drift is directed towards the divertor. This work reports for the first time a theoretical explanation and numerical simulations that qualitatively reproduce this bifurcation and its dependence on the toroidal field direction. According to the model, the bifurcation is primarily driven by the interdependence of the E×B-drift fluxes, divertor electric potential structure, and divertor conditions. In the attached conditions, strong potential gradients in the low field side (LFS) divertor drive E×B-drift flux towards the high field side divertor, reinforcing low density, high temperature conditions in the LFS divertor leg. At the onset of detachment, reduction in the potential gradients in the LFS divertor leg reduce the E×B-drift flux as well, such that the divertor plasma evolves nonlinearly to high density, strongly detached conditions. Experimental estimates of the E×B-drift fluxes, based on divertor Thomson scattering measurements, and their dependence on the divertor conditions are qualitatively consistent with the numerical predictions. The implications for divertor power exhaust and detachment control in the next step fusion devices are discussed.

Tuberculosis screening among HIV-infected patients: tuberculin skin test vs. interferon-gamma release assay.

National guidelines recommend screening for latent tuberculosis infection (LTBI) in all HIV-infected patients. Thus, the objective of this study was to measure protocol adherence to national guidelines regarding LTBI screening for HIV-infected patients entering care at an urban primary care clinic specializing in HIV care, identify clinical and other characteristics associated with adherence, and determine whether transitioning from the tuberculin skin test (TST) to the interferon-gamma release assay (IGRA) improved adherence. We conducted a retrospective study using protocol adherence to LTBI screening guidelines within twelve months of entering care at an HIV clinic as the primary outcome. Successful protocol adherence was defined as the placement and reading of a TST, performance of an IGRA, or a note in study clinic records documenting prior testing or treatment for tuberculosis in an outside setting. Multivariable modified Poisson regression models were used in analyses. Overall, 32% (n = 118/372) of patients received LTBI screening within twelve months of entering care. Protocol adherence to LTBI screening guidelines increased from 28% to 37% following the transition from TST to IGRA screening. IGRA screening [adjusted prevalence ratio: 1.45, 95% confidence limits: (1.07, 1.96)], male sex [1.47 (1.05, 2.07)], transfer patient status [1.51 (1.05, 2.18)], and greater than one year of clinic attendance [1.62 (1.06, 2.48)] were independently associated with protocol adherence. Among patients without prior LTBI screening or treatment, patients entering the clinic in 2013 under the IGRA screening protocol were more likely to be screened for LTBI compared to patients entering under the TST screening protocol (34.3% vs. 9.7%, p < 0.001). In conclusion, transitioning from TST to IGRA-based screening improved adherence to screening guidelines. However, further work on improving adherence to LTBI screening guidelines among HIV-infected patients is needed.

Asymmetries in the motional Stark effect emission on the DIII-D tokamak.

Spectrometer measurements and filter upgrades to a motional Stark effect polarimeter measuring the outer half-radius of the DIII-D tokamak helped to identify asymmetries in the polarization angle of Stark-split emission. The measured polarization angle of the π components differs and is not orthogonal to the σ component. These differences persist over a range of densities and with low levels of background light. It is suggested that the difference in the polarization angle between components is from a change in the ellipticity of the emitted light across the Stark components coupled with imperfect polarization preservation from an in-vessel mirror.

Cytoplasmic myosin-exposed apoptotic cells appear with caspase-3 activation and enhance CLL cell viability.

The degree of chronic lymphocytic leukemia (CLL) B-cell antigen receptor (BCR) binding to myosin-exposed apoptotic cells (MEACs) correlates with worse patient outcomes, suggesting a link to disease activity. Therefore, we studied MEAC formation and the effects of MEAC binding on CLL cells. In cell line studies, both intrinsic (spontaneous or camptothecin-induced) and extrinsic (FasL- or anti-Fas-induced) apoptosis created a high percent of MEACs over time in a process associated with caspase-3 activation, leading to cytoplasmic myosin cleavage and trafficking to cell membranes. The involvement of common apoptosis pathways suggests that most cells can produce MEACs and indeed CLL cells themselves form MEACs. Consistent with the idea that MEAC formation may be a signal to remove dying cells, we found that natural IgM antibodies bind to MEACs. Functionally, co-culture of MEACs with CLL cells, regardless of immunoglobulin heavy-chain variable region gene mutation status, improved leukemic cell viability. Based on inhibitor studies, this improved viability involved BCR signaling molecules. These results support the hypothesis that stimulation of CLL cells with antigen, such as those on MEACs, promotes CLL cell viability, which in turn could lead to progression to worse disease.

Wide-angle ITER-prototype tangential infrared and visible viewing system for DIII-D.

An imaging system with a wide-angle tangential view of the full poloidal cross-section of the tokamak in simultaneous infrared and visible light has been installed on DIII-D. The optical train includes three polished stainless steel mirrors in vacuum, which view the tokamak through an aperture in the first mirror, similar to the design concept proposed for ITER. A dichroic beam splitter outside the vacuum separates visible and infrared (IR) light. Spatial calibration is accomplished by warping a CAD-rendered image to align with landmarks in a data image. The IR camera provides scrape-off layer heat flux profile deposition features in diverted and inner-wall-limited plasmas, such as heat flux reduction in pumped radiative divertor shots. Demonstration of the system to date includes observation of fast-ion losses to the outer wall during neutral beam injection, and shows reduced peak wall heat loading with disruption mitigation by injection of a massive gas puff.

Near-infrared spectroscopy for divertor plasma diagnosis and control in DIII-D tokamak.

New near infrared (NIR) spectroscopic measurements performed in the DIII-D tokamak divertor plasma suggest new viable diagnostic applications: divertor recycling and low-Z impurity flux measurements, a spectral survey for divertor Thomson scattering (DTS) diagnostic, and Te monitoring for divertor detachment control. A commercial 0.3 m spectrometer coupled to an imaging lens via optical fiber and a InGaAs 1024 pixel array detector enabled deuterium and impurity emission measurements in the range 800-2300 nm. The first full NIR survey identified D, He, B, Li, C, N, O, Ne lines and provided plasma Te, ne estimates from deuterium Paschen and Brackett series intensity and Stark line broadening analysis. The range 1.000-1.060 mm was surveyed in high-density and neon seeded divertor plasmas for spectral background emission studies for λ = 1.064 µm laser-based DTS development. The ratio of adjacent deuterium Paschen-α and Brackett Br9 lines in recombining divertor plasmas is studied for divertor Te monitoring aimed at divertor detachment real-time feedback control.

Conceptual design of a divertor Thomson scattering diagnostic for NSTX-U.

A conceptual design for a divertor Thomson scattering (DTS) diagnostic has been developed for the NSTX-U device to operate in parallel with the existing multipoint Thomson scattering system. Higher projected peak heat flux in NSTX-U will necessitate application of advanced magnetics geometries and divertor detachment. Interpretation and modeling of these divertor scenarios will depend heavily on local measurement of electron temperature, Te, and density, ne, which DTS provides in a passive manner. The DTS design for NSTX-U adopts major elements from the successful DIII-D DTS system including 7-channel polychromators measuring Te to 0.5 eV. If implemented on NSTX-U, the divertor TS system would provide an invaluable diagnostic for the boundary program to characterize the edge plasma.

C-III flow measurements with a coherence imaging spectrometer.

This work describes a coherence imaging spectrometer capable of making spatially resolved CIII flow measurements in the DIII-D lower divertor. The spectrometer exploits a periscope view of the plasma to produce line-of-sight averaged velocity measurements of CIII. From these chord averaged flow measurements, a 2D poloidal cross section of the CIII flow is tomographically reconstructed. Details of the diagnostic setup, acquired data, and data analysis will be presented, along with prospects for future applications.

Pedestal magnetic field measurements using a motional Stark effect polarimeter.

Temperature-controlled, 0.15 nm interference filters were installed on an edge-viewing system of the motional Stark effect (MSE) polarimeter on the DIII-D tokamak. The upgraded system provides a factor of two reduction in the bandpass compared to the previous design, and linear control of the bandpass, which is unaltered by wavelength tuning. With the new system, there is a reduced dependence of the inferred polarization angle on the filter wavelength calibration. Recent measurements from the calibrated edge-viewing system show increased agreement with other MSE arrays.

Magnetohydrodynamic interference with the edge pedestal motional Stark effect diagnostic on DIII-D.

Accurate measurement of internal magnetic field direction using motional Stark effect (MSE) polarimetry in the edge pedestal is desired for nearly all tokamak scenario work. A newly installed 500 kHz 32-channel digitizer on the MSE diagnostic of DIII-D allows full spectral information of the polarimeter signal to be recovered for the first time. Fourier analysis of this data has revealed magnetohydrodynamic (MHD) fluctuations in the plasma edge pedestal at ρ ≥ 0.92. By correlating edge localized mode fluctuations seen on lock-in amplifier outputs with MSE spectrograms, it has been shown that edge pedestal tearing mode fluctuations cause interference with MSE second harmonic instrument frequencies. This interference results in unrecoverable errors in the real-time polarization angle measurement that are more than an order of magnitude larger than typical polarimeter uncertainties. These errors can cause as much as a 38% difference in local q. By using a redundant measure of the linear polarization found at the fourth harmonic photo-elastic modulator (PEM) frequency, MHD interference can be avoided. However, because of poorer signal-to-noise the fourth harmonic signal computed polarization angle shows no improvement over the MHD polluted second harmonics. MHD interference could be avoided in future edge pedestal tokamak polarimeters by utilizing PEMs with higher fundamental frequencies and a greater separation between their frequencies.

A digital lock-in upgrade of the motional Stark effect diagnostic on DIII-D.

The use of lock-in amplifiers for phase sensitive detection of motional Stark effect (MSE) diagnostic signals is of critical importance to real-time internal current profile measurements in tokamak plasmas. A digital lock-in (DLI) upgrade utilizing field programable gate array firmware has been installed on the MSE system of the DIII-D tokamak for the eventual replacement of largely obsolete analog units. While the new digital system has shown a small reduction in electronic noise over the analog, the main advantages are reduced cost, hardware simplicity, compact size, and phase tracking during plasma operations. DLI recovery of MSE polarization angles was accomplished through use of reference processing to produce only photoelastic modulator (PEM) second harmonic frequencies and electronic signal processing to maximize the fidelity of the recovered signal. A simplified discrete analytical solution was found that accurately describes the new DLI hardware. The DLI algorithm was found to cause a prohibitively large oscillating artifact atop the demodulated signal. The artifact was caused by the accumulator interval not containing an exact integer number of PEM multiplier periods. Successful MSE measurements require the minimization of this oscillating artifact amplitude. The analytical solution was used to select an appropriate accumulator interval that both reduces the artifact and maintains the greatest temporal resolution possible. Sample EFIT equilibria reconstructions and corresponding safety factor profiles showed very close agreement between the analog and digital lock-ins.

Doppler coherence imaging and tomography of flows in tokamak plasmas (invited).

This article describes the results of spatial heterodyne Doppler "coherence imaging" of carbon ion flows in the divertor region of the DIII-D tokamak. Spatially encoded interferometric projections of doubly ionized carbon emission at 465 nm have been demodulated and tomographically inverted to obtain the spatial distribution of the carbon ion parallel flow and emissivity. The operating principles of the new instruments are described, and the link between measured properties and line integrals of the flow field are established. An iterative simultaneous arithmetic reconstruction procedure is applied to invert the interferometric phase shift projections, and the reconstructed parallel flow field amplitudes are found to be in reasonable agreement with UEDGE modeling.

Comparative analysis of six genome sequences of three novel picornaviruses, turdiviruses 1, 2 and 3, in dead wild birds, and proposal of two novel genera, Orthoturdivirus and Paraturdivirus, in the family Picornaviridae.

In this territory-wide molecular epidemiology study of picornaviruses, involving 6765 dead wild birds from 201 species in 50 families over a 12 month period, three novel picornaviruses, turdiviruses 1, 2 and 3 (TV1, TV2 and TV3), were identified from birds of different genera in the family Turdidae. In contrast to many other viruses in birds of the family Turdidae or viruses of the family Picornaviridae, TV1, TV2 and TV3 were found exclusively in the autumn and winter months. Two genomes each of TV1, TV2 and TV3 were sequenced. Regions P1, P2 and P3 of the three turdiviruses possessed, respectively, <40, <40 and <50 % amino acid identities with those of other picornaviruses. Moreover, P1, P2 and P3 of TV1 also possessed, respectively, <40, <40 and <50 % amino acid identities with those of TV2 and TV3. Phylogenetic analysis revealed that TV1, TV2 and TV3 were distantly related to members of the genus Kobuvirus. Among the three turdiviruses, TV2 and TV3 were always clustered together, with high bootstrap supports of 1000. The genomic features of TV2 and TV3 were also distinct from TV1, including lower G+C contents, shorter leader protein and a preference for codon sequence NNT rather than NNC for amino acids that can use either NNT or NNC as codons (P<0.001 by χ(2)-test). Based on our results we propose two novel genera, Orthoturdivirus for TV1, and Paraturdivirus for TV2 and TV3, in the family Picornaviridae. The type of internal ribosomal entry site for TV1, TV2 and TV3 remains to be determined.

Characterization of avian influenza viruses A (H5N1) from wild birds, Hong Kong, 2004-2008.

From January 2004 through June 2008, surveillance of dead wild birds in Hong Kong, People's Republic of China, periodically detected highly pathogenic avian influenza (HPAI) viruses (H5N1) in individual birds from different species. During this period, no viruses of subtype H5N1 were detected in poultry on farms and in markets in Hong Kong despite intensive surveillance. Thus, these findings in wild birds demonstrate the potential for wild birds to disseminate HPAI viruses (H5N1) to areas otherwise free from the viruses. Genetic and antigenic characterization of 47 HPAI (H5N1) viruses isolated from dead wild birds in Hong Kong showed that these isolates belonged to 2 antigenically distinct virus groups: clades 2.3.4 and 2.3.2. Although research has shown that clade 2.3.4 viruses are established in poultry in Asia, the emergence of clade 2.3.2 viruses in nonpasserine birds from Hong Kong, Japan, and Russia raises the possibility that this virus lineage may have become established in wild birds.