RESUMO
In recent years, cheaply available cementitious materials (CMs) are increasingly finding useful applications in construction engineering. This manuscript focused on the development and fabrication of unsaturated polyester resin (UPR)/cementitious material composites to be potentially useful in a variety of construction applications. For this purpose, five types of powders from widely available fillers, i.e., black cement (BC), white cement (WC), plaster of Paris (POP), sand (S), and pit sand (PS), were used. Cement polymer composite (CPC) specimens were prepared by a conventional casting process with various filler contents of 10, 20, 30, and 40 wt %. Neat UPR and CPCs were investigated mechanically by testing their tensile, flexural, compressive, and impact properties. Electron microscopy analysis was used to analyze the relation between the microstructure and mechanical properties of CPCs. The assessment of water absorption was conducted. The highest tensile, flexural, compressive upper yield, and impact strength values were recorded for POP/UPR-10, WC/UPR-10, WC/UPR-40, and POP/UPR-20, respectively. The highest percentages of water absorption were found to be 6.202 and 5.07% for UPR/BC-10 and UPR/BC-20, while the lowest percentages were found to be 1.76 and 1.84% for UPR/S-10 and UPR/S-20, respectively. Based on the finding of this study, the properties of CPCs were found to depend on not only the filler content but also the distribution, particle size, and combination between the filler and the polymer.
RESUMO
The divalent transition metal ions (Ni, Co, and Fe)-doped MgO nanoparticles were synthesized via the sol-gel method. X-ray diffraction showed the MgO pure, single cubic phase of samples at 600 °C. Field emission electron microscope showed the uniform spherical shape of samples. The magnetic behavior of Ni, Co, Fe-doped MgO system were varied with Ni, Co, Fe content (0.00, 0.01, 0.03, 0.05, 0.07). The magnetic nature of pure had changed from paramagnetic to ferromagnetic. The number of oxygen vacancies increases with increasing amounts of dopant ions that lead to an ionic charge imbalance between Ni2+/Co2+/Fe2+ and Mg2+, leading to increase magnetic properties of the samples. The magnetic nature of prepared samples makes them suitable for biomedical applications. A comparative study of the antibacterial activity of nanoparticles against the Gram-negative (E. coli) and Gram-positive bacteria (S. aureus) was performed by disc diffusion, pour plate techniques, and study surface morphology of untreated and treated bacterial cell wall. An investigation of the antibacterial activity of doped MgO nanoparticles reveals that the doped MgO nanoparticles show effective antibacterial activity against the Gram-negative (E. coli) and Gram-positive (S. aureus) bacterium. The minimum inhibitory concentration of the synthesized nanoparticles against microorganisms was recorded with 40 µg/ml, while the maximum inhibitory concentration was observed with 80 µg/ml. At a concentration of 80 µg/ml, the complete growth inhibition of the E. coli was achieved with 7% Co-doped MgO and 7% Fe-doped MgO, while bacterial growth of S. aureus was inhibited by 100% in the presence of 7% Fe-doped MgO. The present work is promising for using nanomaterials as a novel antibiotic instead of the conventional antibiotics for the treatment of infectious diseases which are caused by tested bacteria.
