PEEK and glass fiber post pushout bond strength and vickers hardness of canal disinfected with curcumin photosensitizer activated by microbubble emulsion and sodium-hypochlorite with EDTA.

AIMS: Impact of different post-space disinfectants (Saline, Sodium hypochlorite (NaOCl) followed by ethylene-diamine-tetra-acetic acid (EDTA) and curcumin activated by microbubble emulsion (MBE) on the Vickers hardness (VH) of root canal dentin and extrusion bond strength (EBS) of Glass fiber post (GFP) and PEEK post. METHODS: Ninety maxillary central incisors having fully formed roots were included. After the specimen's disinfection, root canal treatment was completed. Post space was prepared by removing gutta-percha using gates glidden drills. Teeth were then arbitrarily allocated into three groups based on the methods of disinfection regime used. Group 1: Saline, Group 2: NaOCl+ EDTA and Group 3: Curcumin activated by MBE (n = 30). Analysis of VH of radicular dentin was performed using a micro-Vickers tester on ten samples from each group. After post-space disinfection, twenty specimens from each group were further divided into two subgroups (n = 10) In group-1A 2A, and 3A, GFP was used. Whereas, prefabricated PEEK posts were used in 1B, 2B, and 3B subgroups. The PBS and failure modes were performed using a universal testing machine and stereomicroscope respectively. Data was analyzed using ANOVA and Tukey post hoc test to identify significant variations among groups concerning the MH and EBS of the different posts used (p = 0.05). RESULTS: Group 2 (5.25 % NaOCl + 17 % EDTA) (0.15 ± 0.02 GPa) treated specimens presented lowest scores of VH. However, Group 1 (Saline) irrigated canals displayed the highest scores of surface hardness (0.25 ± 0.07 GPa). Additionally, a cervical third of 3A (CP activated by MBE + GFP) (11.22 ± 0.79 MPa) presented the highest scores of bond integrity. Whereas Group 1B (Saline + PEEK post) treated specimens presented the lowest scores of PBS (4.15 ± 0.15 MPa). CONCLUSION: Curcumin activated by microbubble emulsion for disinfection of canal dentin demonstrated favorable VH. Similarly, glass fiber post-cemented in radicular walls disinfected with curcumin activated with MBE showed promising post-bond integrity to the canal dentin.

Effect of canal medicaments triple antibiotic paste, Bio-C Temp, and Nano-silver gel activated by visible blue light on canal dentin microhardness and extrusion bond strength of AH plus sealer: A SEM and EDX analysis.

AIM: Assessment of contemporary canal medicaments (Triple antibiotic paste (TAP), Bio-C Temp, and Nano silver gel activated by visible blue light on the dentin microhardness (MH) and push-out bond strength (PBS) of AH plus endodontic sealer. METHOD: Sixty extracted premolars were obtained and decontaminated. Canal cleaning and shaping were performed. The samples were randomly allocated into four groups based on the intracanal medicaments. Group 1= CH paste, Group 2= TAP, Group 3= Bio-C Temp, and Group 4= Nano-silver gel activated by visible blue light. MH assessment was performed using a Vickers Microhardness tester. Forty specimens, ten from each group underwent root canal obturation. PBS and failure mode evaluation were performed. ANOVA and Post Hoc Tukey test were utilized to conduct intra and inter-group comparisons. RESULTS: The maximum outcome of surface hardness was presented by Group-3 (Bio-C Temp®) specimens. However, minimum scores of MH were displayed by Group 1 (CH) treated teeth. The highest outcomes of EBS were exhibited by the cervical third of Group 3 (Bio-C Temp®) samples. The apical section of Group 4 Teeth with Nano Silver gel activated by visible blue light revealed the lowest scores of bond integrity. CONCLUSION: Bio-C Temp and TAP proved to be better intracanal medicament than other tested groups in terms of the push-out bond strength of the sealer. TAP displayed lower microhardness as compared to the Bio-C Temp.

Bleached enamel reversal using grape seed extract, green tea, curcumin-activated photodynamic therapy, and Er: YAG on microleakage and bond integrity of composite material bonded to the enamel surface.

AIMS: Bleached enamel reversal using antioxidants sodium ascorbate (SA), Green tea extract (GTE), grape seed extract (GSE), Curcumin photosensitizer (CP) and Er: YAG laser on the adhesive strength and marginal leakage of composite material bonded to the bleached enamel surface. MATERIALS AND METHODS: Enamel surface of hundred and twenty sound human first premolar teeth was cleansed using pumice and bleached with 35 % hydrogen peroxide. The samples were randomly divided into 5 groups based on the antioxidants used. n = 20 Group 1 (Control): No antioxidant agent, Group 2: 10 % SA solution, Group 3: 6.5 % GSE, Group 4: 5 % GTE, Group 5: Er: YAG laser and Group 6: CP. Following reversal, the composite was built and cured for 40 s. All the specimens were stored in distilled water at room temperature for 1 day. Microleakage, SBS, and failure mode were analyzed. Kolmogorov-Smirnov test, one-way analysis of variance, and Tukey's multiple post hoc test were used to analyze the data statistically. RESULTS: Group 2 (SA) (20.11 ± 5.79 nm) exhibited minimum value of microleakage and highest SBS (10.22 ± 1.62 MPa). Whereas, Group 1 (No antioxidant agent) displayed maximum scores of marginal leakage (28.11±8.89 nm) and lowest SBS (7.02 ± 1.22 MPa). CONCLUSION: CP, GTE and GSE can be used as a potential alternative to the commonly used SA solution to reverse the negative impact of bleaching on the enamel surface. The use of reversal agents CP, GTE and GSE improves bond values with a decrease in microleakage scores However, future studies are still warranted to conclude the outcomes of the existing study.

Poly-Ether Ether-Ketone Post Conditioned with Sulfuric Acid, Rose Bengal Activated by Photodynamic Therapy and Sandblasting on Pushout Bond Strength to Radicular Dentin Luted with Methyl Methacrylate and Composite-Based Cement.

Objective: Assessment of post surface conditioners [sulfuric acid (SA), Rose Bengal (RB), and sandblasting (SB)] and different luting cements [methyl methacrylate (MMA)-based cement and composite-based cement] on pushout bond strength (PBS) of poly-ether ether-ketone (PEEK) post bonded to canal dentin. Materials and methods: Endodontic treatment was performed on 120 single-rooted human premolar teeth. The preparation of the post space was performed and 4 mm of gutta-percha was retained in the apical region of the root. One hundred and twenty PEEK posts were fabricated from a PEEK blank utilizing a Computer aided design-Computer aided manufacture (CAD-CAM) system. The PEEK posts were allocated randomly into four groups based on post surface conditioning (n = 30). Group A: SA, Group B: RB, Group C: SB, and Group D: No conditioning (NC). Each group was further divided into two subgroups based on the luting cement used for bonding (n = 15). Group A1, B1, C1, and D1 specimens were cemented using composite-based resin cement. However, Group A2, B2, C2, and D2 posts were luted with MMA-based resin cement. PBS assessment using a universal testing machine was performed. Failure modes were analyzed under a stereomicroscope. The data relating to the effects of surface treatment and luting types of cement were analyzed using one-way analysis of variance (ANOVA) and Tukey's post hoc test (p = 0.05). Results: Coronal section of Group B2: RB+Super-Bond C&B [9.61 ± 0.75 megapascals (MPa)] displayed the highest bond scores of PEEK after root dentin. Whereas it was also discovered that Group D1: NC+Panavia®V5 (2.05 ± 0.72 MPa) presented the lowest PBS scores. Intergroup comparison analysis revealed that Group A2: SA+Super-Bond C&B and Group B2: RB+Super-Bond C&B displayed no significant difference in their bond scores. Conclusions: RB and SA possess the potential to be used as a PEEK post conditioner. MMA-based cement displayed better performance than composite-based cement.

Effect of malachite green, ocimum sanctum, and Er, Cr: YSGG laser on antimicrobial activity against S.mutans and CAD disinfection bonded to resin restoration.

AIMS: Evaluation of survival of S.mutans and shear bond strength (SBS) of adhesive restorative material bonded to carious affected dentin (CAD) after using cavity disinfectant i.e., Er, Cr: YSGG (ECYL), (Nd: YAG) (NYL), Malachite green (MG), Ocimum sanctum (OS) in comparison to the conventional control chlorhexidine gluconate (CHX). MATERIALS AND METHODS: Seventy-five caries-affected mandibular third molars having ICDAS scores 4 and 5 were included. Carious infected dentin was eliminated and CAD surface was obtained. On twenty-five samples, an uncontaminated suspension of S. mutans strain ATCC 35,668 in Brain-Heart Infusion broth (BHI) was obtained after 12 h of incubation at 37 °C. Based on the disinfection regime used to sterilize the CAD surface, all the specimens were allocated into five different groups. (n = 15) Group 1: CAD disinfected with CHX, Group 2: CAD disinfected with ECYL, Group 3: CAD disinfected with NYL, Group 4: CAD disinfected with MG, and Group 5: CAD disinfected with OS. An assessment of the survival rate of S. mutans was performed. Fifty specimens were smeared with single-step adhesive bond followed by restoring the CAD surface using packable composite. SBS and failure mode were determined using a universal testing machine and stereomicroscope at 40x magnification. ANOVA and post-hoc Tukey-Kramer test was used for data analysis p = 0.05. RESULTS: Group 1: CHX-treated specimens displayed the lowest bacterial viability (0.11±0.03 CFU/mL). However, group 4: MG exhibited the highest bacterial survival (0.15 ± 0.09 CFU/mL). The highest and lowest SBS of resin adhesive bonded to disinfected CAD surface were exhibited by (group 5: OS) (21.48±1.39 MPa) and (group 3: NYL) (16.41±0.90 MPa) respectively (p>0.05). CONCLUSION: Ocimum sanctum seems to be promising in terms of its antibacterial efficacy against S.mutans and positive impact on SBS of resin adhesive to CAD surface.

Effectiveness of final cavity disinfectant terminalia chebula, malachite, and indocyanine green, against E. Faecalis and on the bond interface of fiber post to radicular dentin.

AIMS: Evaluation of antimicrobial efficacy of contemporary disinfection Malachite green (MG), Terminalia chebula (T. chebula), and Indocyanine green (ICG)) against E. faecalis and their effect on push-out bond strength (PBS) of glass fiber post (GFP) bonded to root dentin in comparison to conventional irrigation used (Sodium hypochlorite (NaOCl) + Ethylene diamine tetraacetic acid (17% EDTA). MATERIALS AND METHODS: Root canal treatment was initiated on sixty human single-rooted premolars and working length was established. The canals were enlarged using ProTaper universal system till F3. The prepared canals were obturated with Gutta-percha (GP) and AH Plus sealer followed by post-space preparation. Twenty canals contained a standard strain of E. faecalis (n=5 in each group) cultured overnight at 37 °C in BHI broth. All the samples were randomly allocated into four groups based on post-space irrigation. (n = 10) Group 1: 5.25% NaOCl+17% EDTA (Control), Group 2: 5.25% NaOCl + ICG, Group 3: 5.25% NaOCl + MG and Group 4: 5.25% NaOCl + T. chebula. Survival rates of E. faecalis were evaluated on the twenty specimens. GFP was placed on the remaining samples using self-etch dual-cure pastes and sectioning was performed in 1 mm thick slices. PBS and failure mode were analyzed using a universal testing machine and stereomicroscope. One-way analysis of variance (ANOVA) and Tukey multiple comparison t-tests were used for data analysis. (p = 0.05). RESULTS: 5.25% NaOCl+17% EDTA demonstrated (0.11±0.01 CFU/mL) the lowest survival rate of E. faecalis. However, Group 2 (5.25% NaOCl + ICG) exhibited the highest survival rate (0.52 ± 0.10). Furthermore, the coronal third of group 4 (5.25% NaOCl + T. chebula) (8.71±0.25 MPa) specimens demonstrated the highest PBS of GFP. However, an apical section of group 2 samples (5.25% NaOCl + ICG) (1.21±0.71 MPa) displayed the lowest outcome of bond integrity. CONCLUSION: Terminalia chebula when used as a final canal disinfectant seems to be promising in improving canal sterility and the bond strength of GFP to the root dentin.

Color Matching of Universal Shade Resin-Based Composite with Natural Teeth and Its Stability before and after In-Office Bleaching.

Objectives: Esthetics is an essential issue for the long-term success of composite resin restoration. Therefore, this study aimed to view the esthetics of universal shade composite resin restorations and to assess its color matching before and after bleaching. Materials and Methods: Overall, 40 freshly extracted premolars were mounted in an acrylic resin mold, and Class V cavities were then prepared and restored by OMNICHROMA composite (Tokuyama Dental, Tokyo, Japan) and polished with 2-step polishing system. Baseline color analysis was performed using VITA Easyshade V digital spectrophotometer, and another color analysis was carried out 24 hours after storage in distilled water. In-office bleaching was carried out, and color measurements were taken after bleaching and 2 weeks postbleaching. The data were statistically analyzed using SPSS 26.0 Windows version statistical software. Changes were considered statistically significant at P = 0.05. Results: ΔE value of OMNICHROMA restoration before and after restoration was 6.474, 3.529 before and after bleaching, and 3.651 two-weeks postbleaching. In-office bleaching was effective in bleaching the OMNICHROMA specimens as the restoration showed positive ΔL ∗ values, which indicated that the specimens were lighter in color after bleaching; however, the bleaching effect was not maintained after 2 weeks. Conclusion: OMNICHROMA universal shade composite resin restoration showed different color matching values with the adjacent enamel of class Vs. The material appeared lighter in shade postbleaching, and the color change was not maintained 2 weeks postbleaching.

The effects of combining erbium, chromium: Yttrium-scandium-gallium-garnet laser irradiation with fluoride application in controlling the progression of enamel erosion.

OBJECTIVE: Increasing enamel resistance to acid may be useful for preventing cavitation and could reduce changes in the enamel's microhardness. Topical fluoride application and laser irradiation promote acid resistance of dental substrates. The aim of the study was to assess the efficacy of erbium, chromium: yttrium-scandium-gallium-garnet laser irradiation in combination with fluoride application to control enamel erosion. DESIGN: Sixty human premolar specimens were prepared (N = 60) and were randomly assigned to 5 groups, twelve specimens in each group (n = 12/group) according to surface treatment. The groups were as follows: group 1 (C): control with no treatment; group 2 (F): application of 1.23% acidulated phosphate fluoride gel alone; group 3 (L): laser irradiation alone; group 4 (F+L): acidulated phosphate fluoride gel followed by laser irradiation; group 5 (L+F): laser irradiation followed by acidulated phosphate fluoride gel. All the specimens were eroded 10 min in citric acid. Baseline measurements were performed using a Vickers microhardness tester before surface treatment. Subsequently, all specimens were subjected to a 60 min erosion-remineralization cycle for five days followed by measurements of the final surface microhardness. Statistical comparisons were performed by a one-way analysis of variance and Tukey's post hoc analysis. RESULTS: The control, laser, and fluoride + laser groups showed a statistically significant decrease in microhardness values between baseline and post-erosion measurements (P < 0.05), indicating that these treatments could not prevent erosion progression. However, the fluoride and laser + fluoride groups showed a significant increase in microhardness values compared to baseline. CONCLUSIONS: Our results suggest that compared to that of the control group, acidulated phosphate fluoride application as well as laser irradiation prior to fluoride application increased enamel surface microhardness and prevented the progression of enamel erosion.