The relationship between the Hammett acidity and the decomposition of cefotaxime sodium in the solid state.

It was of interest to correlate the solid-state acidity to the decomposition of a model drug namely cefotaxime sodium. Amorphous samples containing either an indicator probe (thymol blue) or a model drug (cefotaxime sodium) were prepared by freeze-drying. The prepared samples were characterized using XRPD and Karl Fischer titrimetry. The acidity in the solid state was measured using reflectance spectroscopy. The kinetics of hydrolysis of cefotaxime sodium was studied in solid state at 50 °C in the Hammett acidity range of 8.12-8.61 and at constant ionic strength. The kinetics of decomposition of cefotaxime sodium in solution was also studied in basic media in the pH range of 7.9-8.9 at 50 °C and at constant ionic strength. The degradation was monitored using a validated HPLC method. The hydrolysis was found to follow pseudo-first-order kinetics in solution and solid state. The results obtained showed that there is a good correlation between the Hammett acidity function and the base-catalyzed decomposition of cefotaxime sodium in the solid state. The Hammett acidity-rate profile for cefotaxime decomposition is similar to the pH-rate profile obtained in solution. The decomposition of cefotaxime sodium in the solid state was found to be sensitive to the ionic strength.

Oral Delivery of Teriparatide Using a Nanoemulsion System: Design, in Vitro and in Vivo Evaluation.

PURPOSE: Investigate the possibility of delivering teriparatide orally using nanoemulsion. METHOD: Teriparatide was allowed to interact with chitosan in the presence of HPßCD.The formed polyelectrolyte complex (PEC) was characterized by DSC, FTIR, DLS and for entrapment efficiency. PEC was the incorporated in an oil phase consisting of Oleic Acid, Labrasol and Plurol Oleique to form a nanoemulsion. This preparation was characterized for refractive index, viscosity, pH, conductivity, particle size, and morphology.Bioavailability of the preparation was evaluated using rabbits against SC injection. The efficacy of the formula was tested using ovariectomized rats (an osteoporosis animal model) and mechanical and histological tests were conducted on their bones. The stability of the preparation was evaluated by storing samples at 4o C, 25o C and 40o C for three months. RESULTS: PEC testing demonstrate a complex formation with particle size of 208 nm, zeta potential of +17 mV and entrapment efficiency of 49%. For the nanoemulsion, the results demonstrate the formation of a nano-sized dispersed system (108 nm) with a drug loading of 98% and a percent protection of 90% and 71% in SGF and SIF respectively. Bioavailability results showed a sustained release profile was achieved following the oral formulation administration. Efficacy studies showed improvement in the strength, thickness and connectivity of bones. Short-term stability study demostrated that the nanoemulsion is mostly stable at 4o C. CONCLUSION: These findings demonstrate the ability of delivering Teriparatide orally using oleic acid based dispersion in combination with chitosan PEC.

Solid self-nanoemulsifying drug delivery system filled in enteric coated hard gelatin capsules for enhancing solubility and stability of omeprazole hydrochloride.

Omeprazole has poor water solubility, low stability in acidic solutions, and is subject to first pass metabolism resulting in low bioavailability. The objective was to enhance the dissolution and stability by preparing a solid-self nanoemulsifying drug delivery system (SNEDDS) and filling it in enteric coated HGCs. Drug solubility in many oils, surfactants, and cosurfactants was studied. Different SNEDDS were prepared and ternary phase diagrams were constructed. The optimum SNEDDS was evaluated. It was converted into solid by adsorption onto Neusilin® US2, and evaluated. Emulsions formed using Capryol 90, Cremophor RH 40, and ethanol formed spontaneously and were clear. Droplet size was 19.11 ± 3.11 nm, PDI was 0.18 ± 0.05, and zeta potential was -3.9 ± 1.56 mV. Non-medicated SNEDDS was thermodynamically stable. Cloud point was 88 ± 2 °C. Encapsulation efficiency and drug loading of solid-SNEDDS were 98.56 ± 0.44 and 1.29 ± 0.01%, respectively. Flow properties were much enhanced. Crystalline drug was adsorbed/precipitated onto Neusilin® US2 in amorphous form. Dissolution rate was enhanced as compared to commercial products and unprocessed drug. The drug was unstable at the accelerated stability conditions. Accordingly, the traditional stability study at 25 °C should be conducted. In conclusion, the solid-SNEDDS filled in enteric coated HGCs enhanced the dissolution rate and stability in acidic pH.

Preparation and Characterization of an Oral Norethindrone Sustained Release/Controlled Release Nanoparticles Formulation Based on Chitosan.

Norethindrone has short half-life and low bioavailability. The objective was to prepare an oral Sustained Release/Controlled Release (SR/CR) Liquid Medicated Formulation (LMF) to enhance bioavailability and improve patient compliance. Norethindrone was solubilized in HP-ß-CD then complexed with different concentrations of Low Molecular Weight Chitosan (LMWC) (mucoadhesive). PolyElectrolyte Complexes (PECs) were homogenized with oleic acid using different concentrations of tween 80 to form LMFs (nanoemulsions). PECs and LMFs were characterized using different techniques. LMF 2 (optimum formula containing 2.5% w/v LMWC 11 kDa) was administered orally to dogs and mice for pharmacokinetic and adhesion evaluation. DSC, FTIR spectroscopy and SEM images indicated complex formation. Mean diameters of PECs were 183-425 nm, mean zeta potentials were + 18.6-+ 31 mV, and complexation efficiencies were 18.0-20.6%. Ten to fifteen percent tween was needed to prepare homogenous LMFs. Mean diameter of LMF 2 was 10.5 ± 0.57 nm, mean zeta potential was - 11.07 ± - 0.49 mV, encapsulation efficiency was 95.28 ± 1.75%, and each mL contained 145.5 µg norethindrone. SEM images showed spherical homogeneous oil droplets. All of these parameters were affected by molecular weight and concentration of chitosan. Norethindrone release from LMFs was controlled (zero order) for 96 h. It was little affected by molecular weight and concentration of chitosan but affected by concentration of tween 80. LMF 2 adhered to GIT for 48 h and enhanced the bioavailability. It showed no cytotoxicity after considering dilution in GIT and was stable for 3 months refrigerated. In conclusion an effective SR/CR LMF was prepared.

Low Molecular Weight Chitosan-Coated PLGA Nanoparticles for Pulmonary Delivery of Tobramycin for Cystic Fibrosis.

(1) Background: Poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) loaded with Tobramycin were prepared using a solvent-evaporation method. (2) Methods: The NPs were coated with low molecular weight chitosan (LMWC) to enhance the mucoadhesiveness of PLGA-NPs. The following w/w ratios of tobramycin to LMWC were prepared: control (0:0.50), F0 (1:0.25), F0.5 (1:0.5), and F1 (1:1). (3) Results: The results showed that the size of the particles increased from 220.7 nm to 575.77 nm as the concentration of LMWC used in the formulation increased. The surface charge was also affected by the amount of LMWC, where uncoated-PLGA nanoparticles had negative charges (-2.8 mV), while coated-PLGA NPs had positive charges (+33.47 to +50.13 mV). SEM confirmed the size and the spherical homogeneous morphology of the NPs. Coating the NPs with LMWC enhanced the mucoadhesive properties of the NPs and sustained the tobramycin release over two days. Finally, all NPs had antimicrobial activity that increased as the amount of LMWC increased. (4) Conclusion: In conclusion, the formulation of mucoadhesive, controlled-release, tobramycin-LMWC-PLGA nanoparticles for the treatment of P. aeruginosa in cystic fibrosis patients is possible, and their properties could be controlled by controlling the concentration of LMWC.