Comparison Between Numeric Parameters From Acute and Chronic Venous Leg Ulcers: Identification of Potential Objective Nonhealing Parameters.

BACKGROUND: Some authors claim that the clinical methods often employed to assess chronic venous leg ulcers (CVLU) are based on subjective interpretation. The treatments based on a subjective characterization could become a trial-and-error therapy, resulting in longer evolutions and high recurrence rates. PURPOSE: The aim of this work was to compare numeric parameters from acute and chronic venous leg ulcers to identify potential objective nonhealing parameters. METHODS: The study was performed with hospital outpatients from 2016 to 2019. Cohorts were established according to the ulcer evolution time. Data collected related to ulcer characteristics included exudate pH, lactate and glucose concentrations, temperatures, microbiology findings, and imaging study results. RESULTS: Approximately 83% of the examined ulcers were chronic. Seventy-one percent of CVLUs and 59% of the acute ulcers had a pH ≥8. A high variability was found for the concentration of glucose and lactate in exudates of both acute and chronic ulcers. Variations of temperatures of normal skin (ΔT1) and periulcer zone (ΔT2) in reference to the wound bed temperature with values above 1 could indicate the presence of an inflammatory process and be used as a new potential marker of inflammation. All the acute ulcers and 88% of CVLUs showed <80% of granulation tissue in the imaging study. Finally, more than 105 organisms per gram of tissuewere found in 100% of the analyzed samples. CONCLUSIONS: Whereas there were not significant differences among the clinical measured parameters between acute and chronic ulcers, further research on the use of objective measurable parameters is needed to establish cutoff points to differentiate the "chronic state" of an ulcer as a "nonhealing state" regardless of the evolution time. Also, the use of these easily obtainable and low-cost nonhealing parameters would be a new approach to accurately monitor this pathology.

A detailed exploration of intermolecular interactions in 4-(4-dimethylaminobenzylideneamino)-N-(5-methyl-3-isoxazolyl)benzenesulfonamide and related Schiff bases: Crystal structure, spectral studies, DFT methods, Pixel energies and Hirshfeld surface analysis.

The Schiff base of the title has been synthesized and its crystal structure determined by single-crystal X-ray diffraction. The compound was characterized by IR, Raman, 1H NMR, 13C NMR and electronic absorption spectra. DFT calculations provide the quantum chemical basis for the observed molecular conformation. A study of intermolecular interactions of the title compound is compared with seven other closely related structures and reveals that molecules in most of the compounds are linked by a cooperative effect of strong and weak hydrogen bonds, CH…π, and π…π stacking interactions, and also lp…π contacts. Lattice energy calculations indicate that the dispersion component is the major contribution, with the coulombic term playing a significant role in the total energy. Interaction energies for molecular pairs involving NH···N bonds indicate a dominant contribution to packing stabilization coming from coulomb component. Hirshfeld surfaces and 2D-fingerprint plots allowed us to visualize different intermolecular contacts and its relative contributions to total surface in each compound. The analysis of electrostatic potential (ESP) maps correlates well with the computed energies providing evidences on the dominant electrostatic nature of NH···N and NH···O interactions.

Determination of the main solid-state form of albendazole in bulk drug, employing Raman spectroscopy coupled to multivariate analysis.

Albendazole (ALB) is a broad-spectrum anthelmintic, which exhibits two solid-state forms (Forms I and II). The Form I is the metastable crystal at room temperature, while Form II is the stable one. Because the drug has poor aqueous solubility and Form II is less soluble than Form I, it is desirable to have a method to assess the solid-state form of the drug employed for manufacturing purposes. Therefore, a Partial Least Squares (PLS) model was developed for the determination of Form I of ALB in its mixtures with Form II. For model development, both solid-state forms of ALB were prepared and characterized by microscopic (optical and with normal and polarized light), thermal (DSC) and spectroscopic (ATR-FTIR, Raman) techniques. Mixtures of solids in different ratios were prepared by weighing and mechanical mixing of the components. Their Raman spectra were acquired, and subjected to peak smoothing, normalization, standard normal variate correction and de-trending, before performing the PLS calculations. The optimal spectral region (1396-1280cm(-1)) and number of latent variables (LV=3) were obtained employing a moving window of variable size strategy. The method was internally validated by means of the leave one out procedure, providing satisfactory statistics (r(2)=0.9729 and RMSD=5.6%) and figures of merit (LOD=9.4% and MDDC=1.4). Furthermore, the method's performance was also evaluated by analysis of two validation sets. Validation set I was used for assessment of linearity and range and Validation set II, to demonstrate accuracy and precision (Recovery=101.4% and RSD=2.8%). Additionally, a third set of spiked commercial samples was evaluated, exhibiting excellent recoveries (94.2±6.4%). The results suggest that the combination of Raman spectroscopy with multivariate analysis could be applied to the assessment of the main crystal form and its quantitation in samples of ALB bulk drug, in the routine quality control laboratory.

Molecular view of the interaction of S-methyl methanethiosulfonate with DPPC bilayer.

We present molecular dynamics (MD) simulation studies of the interaction of a chemo preventive and protective agent, S-methyl methanethiosulfonate (MMTS), with a model bilayer of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC). We analyzed and compared its diffusion mechanisms with the related molecule dimethyl sulfoxide (DMSO). We obtained spatially resolved free energy profiles of MMTS partition into a DPPC bilayer in the liquid-crystalline phase through potential of mean force (PMF) calculations using an umbrella sampling technique. These profiles showed a minimum for MMTS close to the carbonyl region of DPPC. The location of MMTS molecules in the DPPC bilayer observed in the MD was confirmed by previous SERS studies. We decomposed PMF profiles into entropic and enthalpic contributions. These results showed that the driving force for the partitioning of MMTS into the upper region of DPPC is driven by a favorable entropy change while partitioning into the acyl chains is driven by enthalpy. On the other hand, the partition of DMSO into the membrane is not favored, and is driven by entropy instead of enthalpy. Free diffusion MD simulations using all atom and coarse grained (CG) models of DPPC in presence of MMTS were used to analyze the effect of DPPC-MMTS interaction. Density profiles showed that MMTS locates preferentially in the carbonyl region, as expected according to the PMF profile and the experimental evidence. MMTS presented two differential effects over the packing of DPPC hydrocarbonate chains at low or at high molar ratios. An ordering effect was observed when a CG MMTS model was used. Finally, free diffusion MD and PMF decomposition for DMSO were used for comparison.

Gas-phase structure of 2,2,2-trichloroethyl chloroformate studied by electron diffraction and quantum-chemical calculations.

The molecular structure and conformational properties of 2,2,2-trichloroethyl chloroformate, ClC(O)OCH2CCl3 were determined experimentally using gas-phase electron diffraction (GED) and theoretically based on quantum-chemical calculations at the MP2 and DFT levels of theory. Further experimental measurements such as UV-visible, IR and Raman spectroscopy were complemented with the corresponding theoretical studies. All experimental results and calculations confirm the presence of two conformers namely anti-gauche (C1 symmetry) and anti-anti (Cs symmetry). The conformational preference was rationalised by NBO and AIM analyses. Molecular properties such as ionisation potential, electronegativity, chemical potential, chemical hardness and softness were deduced from HOMO-LUMO analyses. The TD-DFT approach was applied to assign the electronic transitions observed in the UV-visible spectrum. A detailed interpretation of the infrared and Raman spectra of the title compound are reported. Using calculated frequencies as a guide, IR and Raman spectra also provide evidence for the presence of both C1 and Cs conformers.

Combined experimental studies and theoretical calculations to yield the complete molecular structure and vibrational spectra of (CH3)3GeH.

The molecular structure of trimethylgermane has been determined by gas electron diffraction experiments. Infrared spectra for the gaseous, liquid, and solid phases were also recorded. Parallel and perpendicular polarized Raman spectra for the liquid were measured to obtain depolarization values. The experimental studies were supported by a series of computational calculations using HF, B3LYP, and MP2 methods and a variety of basis sets. The force fields obtained from density functional theory using both B3LYP/6-31G* and B3LYP/6-311+G** were scaled with both Pulay's SQM methodology and Yoshida's WLS procedure to simulate the vibrational spectra and assist in the assignment of fundamental bands. The Raman intensities were obtained from polarizability derivatives. The vibrational spectra of trimethylgermane were completely assigned on the basis of the experimental data and the theoretical prediction of vibrational frequencies and intensities.

Gas-phase structure, rotational barrier, and vibrational properties of methyl methanethiosulfonate, CH3SO2SCH3: an experimental and computational study.

The molecular structure of methyl methanethiosulfonate, CH3SO2SCH3, has been determined in the gas phase from electron-diffraction data supplemented by ab initio (HF, MP2) and density functional theory (DFT) calculations using 6-31G(d), 6-311++G(d,p), and 6-311G(3df,3pd) basis sets. Both experimental and theoretical data indicate that although both anti and gauche conformers are possible by rotating about the S-S bond, the preferred conformation is gauche. The barrier to internal rotation in the CSSC skeleton has been calculated using the RHF/6-31G(d), MP2/6-31G(d), and B3LYP/6-31G(d) methods as well as MP2 with a 6-31G(3df) basis set on sulfur and 6-31G(d) on C, H, and O. A 6-fold decomposition of the rotational barrier has been performed in terms of a Fourier-type expansion, enabling us to analyze the nature of the potential function, showing that the coefficients V1 and V2 are the dominant terms; V1 is associated with nonbonding interactions, and V2 is associated with hyperconjugative interactions. A natural bond orbital analysis showed that the lone pair --> sigma* hyperconjugative interactions favor the gauche conformation. Furthermore, the infrared spectra for the liquid and solid phases and the Raman spectrum for the liquid have been recorded, and the observed bands have been assigned to the vibrational normal modes. The experimental vibrational data, along with calculated theoretical force constants, were used to define a scaled quantum mechanical force field for the target system that enabled us to estimate the measured frequencies with a final root-mean-square deviation of 6 cm-1.