Energy Harvesting by Mesoporous Reduced Graphene Oxide Enhanced the Mediator-Free Glucose-Powered Enzymatic Biofuel Cell for Biomedical Applications.

Harnessing electrochemical energy in an engineered electrical circuit from biochemical substrates in the human body using biofuel cells is gaining increasing research attention in the current decade due to the wide range of biomedical possibilities it creates for electronic devices. In this report, we describe and characterize the construction of just such an enzymatic biofuel cell (EBFC). It is simple, mediator-free, and glucose-powered, employing only biocompatible materials. A novel feature is the two-dimensional mesoporous thermally reduced graphene oxide (rGO) host electrode. An additionally novelty is that we explored the potential of using biocompatible, low-cost filter paper (FP) instead of carbon paper, a conductive polymer, or gold as support for the host electrode. Using glucose (C6H12O6) and molecular oxygen (O2) as the power-generating fuel, the cell consists of a pair of bioelectrodes incorporating immobilized enzymes, the bioanode modified by rGO-glucose oxidase (GOx/rGO), and the biocathode modified by rGO-laccase (Lac/rGO). Scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDX), transmission electron microscopy, and Raman spectroscopy techniques have been employed to investigate the surface morphology, defects, and chemical structure of rGO, GOx/rGO, and Lac/rGO. N2 sorption, SEM/EDX, and powder X-ray diffraction revealed a high Brunauer-Emmett-Teller surface area (179 m2 g-1) mesoporous rGO structure with the high C/O ratio of 80:1 as well. Results from the Fourier transform infrared spectroscopy, UV-visible spectroscopy, and electrochemical impedance spectroscopy studies indicated that GOx remained in its native biochemical functional form upon being embedded onto the rGO matrix. Cyclic voltammetry studies showed that the presence of mesoporous rGO greatly enhanced the direct electrochemistry and electrocatalytic properties of the GOx/rGO and Lac/rGO nanocomposites. The electron transfer rate constant between GOx and rGO was estimated to be 2.14 s-1. The fabricated EBFC (GOx/rGO/FP-Lac/rGO/FP) using a single GOx/rGO/FP bioanode and a single Lac/rGO/FP biocathode provides a maximum power density (Pmax) of 4.0 nW cm-2 with an open-circuit voltage (VOC) of 0.04 V and remains stable for more than 15 days with a power output of ∼9.0 nW cm-2 at a pH of 7.4 under ambient conditions.

Discharging Behavior of Hollandite α-MnO2 in a Hydrated Zinc-Ion Battery.

Hollandite, α-MnO2, is of interest as a prospective cathode material for hydrated zinc-ion batteries (ZIBs); however, the mechanistic understanding of the discharge process remains limited. Herein, a systematic study on the initial discharge of an α-MnO2 cathode under a hydrated environment was reported using density functional theory (DFT) in combination with complementary experiments, where the DFT predictions well described the experimental measurements on discharge voltages and manganese oxidation states. According to the DFT calculations, both protons (H+) and zinc ions (Zn2+) contribute to the discharging potentials of α-MnO2 observed experimentally, where the presence of water plays an essential role during the process. This study provides valuable insights into the mechanistic understanding of the discharge of α-MnO2 in hydrated ZIBs, emphasizing the crucial interplay among the H2O molecules, the intercalated Zn2+ or H+ ions, and the Mn4+ ions on the tunnel wall to enhance the stability of discharged states and, thus, the electrochemical performances in hydrated ZIBs.

Water-induced formation of an alkali-ion dimer in cryptomelane nanorods.

Tunneled metal oxides such as α-Mn8O16 (hollandite) have proven to be compelling candidates for charge-storage materials in high-density batteries. In particular, the tunnels can support one-dimensional chains of K+ ions (which act as structure-stabilizing dopants) and H2O molecules, as these chains are favored by strong H-bonds and electrostatic interactions. In this work, we examine the role of water molecules in enhancing the stability of K+-doped α-Mn8O16 (cryptomelane). The combined experimental and theoretical analyses show that for high enough concentrations of water and tunnel-ions, H2O displaces K+ ions from their natural binding sites. This displacement becomes energetically favorable due to the formation of K2+ dimers, thereby modifying the stoichiometric charge of the system. These findings have potentially significant technological implications for the consideration of cryptomelane as a Li+/Na+ battery electrode. Our work establishes the functional role of water in altering the energetics and structural properties of cryptomelane, an observation that has frequently been overlooked in previous studies.

Correction: Water-induced formation of an alkali-ion dimer in cryptomelane nanorods.

[This corrects the article DOI: 10.1039/D0SC01517B.].

Revealing and Rationalizing the Rich Polytypism of Todorokite MnO2.

Polytypism, or stacking disorder, in crystals is an important structural aspect that can impact materials properties and hinder our understanding of the materials. One example of a polytypic system is todorokite-MnO2, which has a unique structure among the transition-metal oxides, with large ionic conductive channels formed by the metal oxide framework that can be utilized for potential functionalization, from molecular/ion sieving to charge storage. In contrast to the perceived 3 × 3 tunneled structure, we reveal a coexistence of a diverse array of tunnel sizes in well-crystallized, chemically homogeneous one-dimensional todorokite-MnO2. We explain the formation and persistence of this distribution of tunnel sizes thermochemically, demonstrating the stabilization of a range of coherent large-tunnel environments by the intercalation of partially solvated Mg2+ cations. Based on structural behavior of the system, compared to the common well-ordered alkali-stabilized polymorphs of MnO2, we suggest generalizable principles determining the selectivity of structure selection by dopant incorporation.

Lithiation Mechanism of Tunnel-Structured MnO2 Electrode Investigated by In Situ Transmission Electron Microscopy.

Manganese oxide (α-MnO2 ) has been considered a promising energy material, including as a lithium-based battery electrode candidate, due to its environmental friendliness. Thanks to its unique 1D [2 × 2] tunnel structure, α-MnO2 can be applied to a cathode by insertion reaction and to an anode by conversion reaction in corresponding voltage ranges, in a lithium-based battery. Numerous reports have attributed its remarkable performance to its unique tunnel structure; however, the precise electrochemical reaction mechanism remains unknown. In this study, finding of the lithiation mechanism of α-MnO2 nanowire by in situ transmission electron microscopy (TEM) is reported. By elaborately modifying the existing in situ TEM experimental technique, rapid lithium-ion diffusion through the tunnels is verified. Furthermore, by tracing the full lithiation procedure, the evolution of the MnO intermediate phase and the development of the MnO and Li2 O phases with preferred orientations is demonstrated, which explains how the conversion reaction occurs in α-MnO2 material. This study provides a comprehensive understanding of the electrochemical lithiation process and mechanism of α-MnO2 material, in addition to the introduction of an improved in situ TEM biasing technique.

Silver-Containing α-MnO2 Nanorods: Electrochemistry in Na-Based Battery Systems.

Manganese oxides are considered attractive cathode materials for rechargeable batteries due to the high abundance and environmental friendliness of manganese. In particular, cryptomelane and hollandite are desirable due to their ability to host cations within their octahedral molecular sieve (OMS-2) α-MnO2 structure. In this work, we investigate silver containing α-MnO2 structured materials (AgxMn8O16, x = 1.22, L-Ag-OMS-2 or 1.66, H-Ag-OMS-2) as host materials for Li ion and Na ion insertion/deinsertion. The results indicate a significant difference in the lithiation versus sodiation process of the OMS-2 materials. Initial reduction of Ag1.22Mn8O16 to 1.0 V delivered ∼370 mAh/g. Cycling of Ag1.22Mn8O16 between voltage ranges of 3.8-1.7 V and 3.8-1.3 V in a Na battery delivered initial capacities of 113 and 247 mAh/g, respectively. In contrast, Ag1.66Mn8O16 delivered only 15 mAh/g, ∼ 0.5 electron equivalents, to 1.7 and 1.3 V. Study of the system by electrochemical impedance spectroscopy (EIS) showed a significant decrease in charge transfer resistance from 2029 Ω to 594 Ω after 1.5 electron equivalents per Ag1.22Mn8O16 formula unit of Na ion insertion. In contrast, both Ag1.22Mn8O16 and Ag1.66Mn8O16 exhibited gradual impedance increases during lithiation. The formation of silver metal could be detected only in the sodiated material by X-ray diffraction (XRD). Thus, the impedance of Ag-OMS-2 decreases upon sodiation coincident with the formation of silver metal during the discharge process, consistent with the more favorable formation of silver metal during the sodiation process relative to the lithation process.

Impact of Multifunctional Bimetallic Materials on Lithium Battery Electrochemistry.

Electric energy storage devices such as batteries are complex systems comprised of a variety of materials with each playing separate yet interactive roles, complicated by length scale interactions occurring from the molecular to the mesoscale. Thus, addressing specific battery issues such as functional capacity requires a comprehensive perspective initiating with atomic level concepts. For example, the electroactive materials which contribute to the functional capacity in a battery comprise approximately 30% or less of the total device mass. Thus, the design and implementation of multifunctional materials can conceptually reduce or eliminate the contribution of passive materials to the size and mass of the final system. Material multifunctionality can be achieved through appropriate material design on the atomic level resulting in bimetallic electroactive materials where one metal cation forms mesoscale conductive networks upon discharge while the other metal cations can contribute to atomic level structure and net functional secondary capacity, a device level issue. Specifically, this Account provides insight into the multimechanism electrochemical redox processes of bimetallic cathode materials based on transition metal oxides (MM'O) or phosphorus oxides (MM'PO) where M = Ag and M' = V or Fe. One discharge process can be described as reduction-displacement where Ag(+) is reduced to Ag(0) and displaced from the parent structure. This reduction-displacement reaction in silver-containing bimetallic electrodes allows for the in situ formation of a conductive network, enhancing the electrochemical performance of the electrode and reducing or eliminating the need for conductive additives. A second discharge process occurs through the reduction of the second transition metal, V or Fe, where the oxidation state of the metal center is reduced and lithium cations are inserted into the structure. As both metal centers contribute to the functional capacity, determining the kinetically and thermodynamically preferred reduction processes at various states of discharge is critical to elucidating the mechanism. Specific advanced in situ and ex situ characterization techniques are conducive to gaining insight regarding the electrochemical behavior of these multifunctional materials over multiple length scales. At the material level, optical microscopy, scanning electron microscopy, and local conductivity measurement via a nanoprobe can track the discharge mechanism of an isolated single particle. At the mesoscale electrode level, in situ data from synchrotron based energy dispersive X-ray diffraction (EDXRD) within fully intact steel batteries can be used to spatially map the distribution of silver metal generated through reduction displacement as a function of discharge depth and discharge rate. As illustrated here, appropriate design of materials with multiple electrochemically active metal centers and properties tuned through strategically conceptualized materials synthesis may provide a path toward the next generation of high energy content electroactive materials and systems. Full understanding of the multiple electrochemical mechanisms can be achieved only by utilizing advanced characterization tools over multiple length scales.

MxMn8O16 (M = Ag or K) as promising cathode materials for secondary Mg based batteries: the role of the cation M.

AgxMn8O16 (Ag-OMS-2) and KxMn8O16 (K-OMS-2) were investigated as high voltage cathode materials for Mg based batteries. Both MxMn8O16 materials delivered high initial capacities (>180 mA h g(-1)), and KxMn8O16 showed high cycle stability with a reversible capacity of >170 mA h g(-1) after 20 cycles.

Magnetic studies of mesoporous nanostructured iron oxide materials synthesized by one-step soft-templating.

A combined magnetization and (57)Fe spin-echo nuclear magnetic resonance (NMR) study has been carried out on mesoporous nanostructured materials consisting of the magnetite (Fe3O4) and maghemite (γ-Fe2O3) phases. Two series of samples were synthesized using a recently developed one-step soft-templating approach with systematic variations in calcination temperature and reaction atmosphere. Nuclear magnetic resonance has been shown to be a valuable tool for distinguishing between the two magnetic iron oxide spinel phases, Fe3O4 and γ-Fe2O3, on the nanoscale as well as monitoring phase transformation resulting from oxidation. For the Fe3O4 and γ-Fe2O3 phases, peaks in the NMR spectra are attributed to Fe in the tetrahedral (A) sites and octahedral (B) sites. The magnetic field dependence of the peaks was observed and confirmed the site assignments. Fe3O4 on a nanoscale readily oxidizes to form γ-Fe2O3 and this was clearly evident in the NMR spectra. As evidenced by transmission electron microscope (TEM) images, the porous mesostructure for the iron oxide materials is formed by a random close-packed aggregation of nanoparticles; correspondingly, superparamagnetic behavior was observed in the magnetic measurements. Although X-ray diffraction (XRD) shows the spinel structure for the Fe3O4 and γ-Fe2O3 phases, unlike NMR, it is difficult to distinguish between the two phases with XRD. Nitrogen sorption isotherms characterize the mesoporous structures of the materials, and yield BET surface area values and limited BJH pore size distribution curves.

Crystalline mesoporous K(2-x)Mn8O16 and ε-MnO2 by mild transformations of amorphous mesoporous manganese oxides and their enhanced redox properties.

Synthesis of crystalline mesoporous K(2-x)Mn8O16 (Meso-OMS-2), and ε-MnO2 (Meso-ε-MnO2) is reported. The synthesis is based on the transformation of amorphous mesoporous manganese oxide (Meso-Mn-A) under mild conditions: aqueous acidic solutions (0.5 M H(+) and 0.5 M K(+)), at low temperatures (70 °C), and short times (2 h). Meso-OMS-2 and Meso-ε-MnO2 maintain regular mesoporosity (4.8-5.6 nm) and high surface areas (as high as 277 m(2)/g). The synthesized mesoporous manganese oxides demonstrated enhanced redox (H2-TPR) and catalytic performances (CO oxidation) compared to nonporous analogues. The order of reducibility and enhanced catalytic performance of the samples is Commercial-Mn2O3 < nonporous-OMS-2 < Meso-Mn2O3 < Meso-OMS-2 < Meso-ε-MnO2 < Meso-Mn-A.

Facile synthesis of Co3O4@CNT with high catalytic activity for CO oxidation under moisture-rich conditions.

The catalytic oxidation reaction of CO has recently attracted much attention because of its potential applications in the treatment of air pollutants. The development of inexpensive transition metal oxide catalysts that exhibit high catalytic activities for CO oxidation is in high demand. However, these metal oxide catalysts are susceptible to moisture, as they can be quickly deactivated in the presence of trace amounts of moisture. This article reports a facile synthesis of highly active Co3O4@CNT catalysts for CO oxidation under moisture-rich conditions. Our synthetic routes are based on the in situ growth of ultrafine Co3O4 nanoparticles (NPs) (∼2.5 nm) on pristine multiwalled CNTs in the presence of polymer surfactant. Using a 1% CO and 2% O2 balanced in N2 (normal) feed gas (3-10 ppm moisture), a 100% CO conversion with Co3O4@CNT catalysts was achieved at various temperatures ranging from 25 to 200 °C at a low O2 concentration. The modulation of surface hydrophobicity of CNT substrates, other than direct surface modification on the Co3O4 catalytic centers, is an efficient method to enhance the moisture resistance of metal oxide catalysts for CO oxidation. After introducing fluorinated alkyl chains on CNT surfaces, the superhydrophobic Co3O4@CNT exhibited outstanding activity and durability at 150 °C in the presence of moisture-saturated feed gas. These materials may ultimately present new opportunities to improve the moisture resistance of metal oxide catalysts for CO oxidation.

A general approach to crystalline and monomodal pore size mesoporous materials.

Mesoporous oxides attract a great deal of interest in many fields, including energy, catalysis and separation, because of their tunable structural properties such as surface area, pore volume and size, and nanocrystalline walls. Here we report thermally stable, crystalline, thermally controlled monomodal pore size mesoporous materials. Generation of such materials involves the use of inverse micelles, elimination of solvent effects, minimizing the effect of water content and controlling the condensation of inorganic frameworks by NO(x) decomposition. Nanosize particles are formed in inverse micelles and are randomly packed to a mesoporous structure. The mesopores are created by interconnected intraparticle voids and can be tuned from 1.2 to 25 nm by controlling the nanoparticle size. Such phenomena allow the preparation of multiple phases of the same metal oxide and syntheses of materials having compositions throughout much of the periodic table, with different structures and thermal stabilities as high as 800 °C.

Effects of econazole on receptor-operated and depolarization-induced contractions in rat isolated aorta.

In our previous study, econazole caused a decrease in serum nitrite levels in septic mice in vivo, but it enhanced the mortality rate. The aim of the study was to investigate the in vitro effects of econazole on receptor-operated and depolarization-induced contractions on endothelium-intact and -denuded rat isolated aorta. Econazole (0.1, 1 and 10 microM) significantly inhibited receptor-operated (phenylephrine, Phe) and depolarization (KCl)-induced contractions of endothelium-intact or -denuded rings in a noncompetitive and concentration-dependent manner. Removal of endothelium changed the pD'2 values only for KCl-induced responses. The pD'2 values of L-type calcium channel blocker nifedipine were significantly higher than the econazole on Phe concentration-response curves in endothelium-intact and -denuded rings. Econazole caused a biphasic response in precontracted by Phe or KCl in endothelium-intact and -denuded rings, first a transient contraction following sustained relaxation. Removal of endothelium did not affect the contractile responses induced by Phe. The contractile responses induced by 10 microM econazole in the KCl-precontracted rings were antagonized by the treatment of alpha-adrenergic receptor antagonist, phentolamine (10 microM). Deendothelization was significantly increased the IC50 values of econazole obtained from Phe- and KCl-precontractions. The relaxations induced by 10 microM econazole in endothelium-intact rings precontracted with Phe or KCl were not changed by NO synthase inhibitor, L-N(G)-nitroarginine (100 microM). The IC50 values of econazole were significantly higher than nifedipine in endothelium-intact and -denuded rings. These results suggest that econazole is a noncompetitive antagonist on alpha1-adrenoceptor-mediated and depolarization-induced contractions in rat isolated aorta by inhibiting Ca2+ entry through L-type calcium channels, and the endothelium seems to modulate vascular responses induced by this agent. The vascular effects of econazole may limit the usage of this agent in septic shock.

Evidence for the involvement of peroxynitrite in ischaemic preconditioning in rat isolated hearts.

1. The aim of this study was to investigate the involvement of peroxynitrite, reactive metabolite originating from nitric oxide and superoxide, in preconditioning of the ischaemic myocardium in rat isolated hearts. 2. Isolated hearts perfused with Krebs-Henseleit solution were preconditioned either by 3 min of coronary artery occlusion (CAO) or by peroxynitrite administration at three different concentrations (0.1, 1, 10 microM) for 3 min, followed by 10 min reperfusion and 30 min of CAO. Peroxynitrite, at 1 microM concentration, decreased the incidence of VT from 100% (n=14) to 62% (n=13) and abolished the occurrence of VF (50% in the control group). 3. N-2-mercaptopropionylglycine (MPG, 1 microM - 10 mM) produced a concentration-dependent inhibition of peroxynitrite signals in luminol chemiluminescence and 67+/-1% inhibition was observed at 100 microM (n=7). MPG (at 300 microM, n=7) added to the perfusate 10 min prior to ischaemic preconditioning or peroxynitrite infusion and maintained until CAO, significantly reversed the beneficial effects of the ischaemic and peroxynitrite-treated groups. MPG administration in the peroxynitrite-treated group increased the incidence of VT from 62% (n=13) to 100% (n=10) and total VF from 0% (n=0) to 67% (n=10). Similarly, MPG elevated the incidence of VT from 50% (n=10) to 100% (n=8) in the ischaemic preconditioned group. On its own, MPG did not affect the severity of cardiac arrhythmias. 4. These results suggest that endogenously produced peroxynitrite plays a significant role in the antiarrhythmic effect of ischaemic preconditioning in the rat isolated hearts.

The beneficial effects of peroxynitrite on ischaemia-reperfusion arrhythmias in rat isolated hearts.

The simultaneous production of nitric oxide (NO) and superoxide leads to the formation of a potent toxic metabolite peroxynitrite (ONOO(-)). However, ONOO(-) at low concentrations has been found to exert cardioprotective effects. The purpose of the present study was to investigate the effects of exogenous ONOO(-) on ischaemia-reperfusion arrhythmias. We studied the concentration-response effects of ONOO(-) (0.4, 4, 40 microM ml(-1) min(-1) for 20 min) in rat isolated hearts perfused with Krebs-Henseleit solution. The 0.4 microM concentration of ONOO(-) was selected for further experiments since it did not affect the sinus rhythm. In the hearts subjected to 10 min of ischaemia followed by 10 min of reperfusion during 0.4 microM ml(-1) min(-1) ONOO(-) infusion, the incidence of ventricular fibrillation was decreased significantly from 93% to 38% (n=8) and none of the hearts had an irreversible ventricular fibrillation. Urate, a ONOO(-) scavenger (at 1 mM, n=7), added to the perfusate 5 min prior to the coronary artery occlusion and maintained throughout the experimental period, did not significantly modify the beneficial effects of ONOO(-). Although L-N(G)-nitroarginine methylester (L-NAME) (100 microM, n=8) had no effect, superoxide dismutase (10 U ml(-1))+catalase (100 U ml(-1)) increased the number of ventricular ectopic beats from 91+/-32 to 286+/-83 (n=5) and augmented the incidence of irreversible ventricular fibrillation from 0% to 60%. There were no marked changes in the time of onset of the first arrhythmias in any group. These results suggest that ONOO(-) at a low concentration may exert beneficial effects on ischaemia-reperfusion-induced arrhythmias in rat isolated hearts.

Temporal variation in serum nitrite levels in rats and mice.

Although considerable evidence implicates involvement of nitric oxide (NO) in circadian regulation, little is known about possible 24 h variations in basal NO metabolism. In this study, daily variations in serum nitrite levels were studied in locally bred mice and rats during the months of September and October. The serum was separated from blood samples obtained at six different times of the day and night (1 h, 5 h, 9 h, 13 h, 17 h, and 21 h after lights off [HALO] from male albino mice and rats). As an index of in vivo NO generation, serum nitrite levels (determined by the diazotization method) in rats exhibited significant temporal fluctuation (unpaired Student t test), with the concentration highest at 5 HALO and 21 HALO and lowest at 9 HALO. No such temporal variation was detected in mice in these studies conducted on locally bred animals in the autumn.

The role of nitric oxide in digoxin-induced arrhythmias in guinea-pigs.

We have investigated the effects of nitric oxide synthase inhibitor (L-NAME), nitric oxide precursor (L-arginine) and nitric oxide donor (sodium nitroprusside) on digoxin-induced arrhythmias both in guinea-pig isolated hearts and in anaesthetised animals. Sodium nitroprusside (0.1 mumol kg-1 min.-1 for 70 min.) caused a marked inhibition in mortality and arrhythmia score but L-NAME (10 mg kg-1) and L-arginine (30 mg kg-1 intravenous bolus followed by 10 mg kg-1 min.-1 for 60 min.) treatments were ineffective in anaesthetised guinea-pigs. None of the drugs markedly affected the time of onset of first arrhythmias or ventricular fibrillation incidence. In isolated heart experiments, nitric oxide generated by either L-arginine (1 mM) or sodium nitroprusside (1 mM) significantly reduced the arrhythmia score whereas L-NAME (1 mM) had no effect. Ventricular fibrillation incidence was totally abolished by sodium nitroprusside and none of the hearts treated with L-arginine had an irreversible ventricular fibrillation. L-NAME decreased ventricular tachycardia duration but increased ventricular fibrillation duration. There were no marked changes in the time of onset of first arrhythmias with these drugs in in vitro experiments. These results suggest that nitric oxide may play a modulatory role in the digoxin-induced arrhythmias in guinea-pigs.

A "mutual update" training algorithm for fuzzy adaptive logic control/decision network (FALCON).

The conventional two-stage training algorithm of the fuzzy/neural architecture called FALCON may not provide accurate results for certain type of problems, due to the implicit assumption of independence that this training makes about parameters of the underlying fuzzy inference system. In this correspondence, a training scheme is proposed for this fuzzy/neural architecture, which is based on line search methods that have long been used in iterative optimization problems. This scheme involves synchronous update of the parameters of the architecture corresponding to input and output space partitions and rules defining the underlying mapping; the magnitude and direction of the update at each iteration is determined using the Armijo rule. In our motor fault detection study case, the mutual update algorithm arrived at the steady-state error of the conventional FALCON training algorithm as twice as fast and produced a lower steady-state error by an order of magnitude.

Effects of nitric oxide synthase inhibition in lipopolysaccharide-induced sepsis in mice.

In the present study, we have investigated the effects of nitric oxide (NO) synthase inhibition on mortality in lipopolysaccharide (LPS)-induced sepsis in mice. Serum nitrite levels peaked at 15 h after an injection of LPS (10 mg kg-1, i.p.). Aminoguanidine, a selective inducible NO synthase (iNOS) inhibitor, at a dose of 100 mg kg-1 significantly reduced the LPS-induced increase in nitrite levels and improved mortality. Econazole, iNOS inhibitor, calmodulin antagonist, 5-lipoxygenase and a specific thromboxane synthase inhibitor, at a 1 mg kg-1 dose significantly decreased the LPS-induced increase in nitrite levels, but increased mortality 4. 9-fold when compared to the LPS group (control). Indomethacin, a putative iNOS and non-selective cyclo-oxygenase (COX) inhibitor, of 1, 10 and 100 mg kg-1, dose dependently decreased the LPS-induced increase in nitrite levels. This decrease was significantly different from the control at 10 and 100 mg kg-1 dose levels. When indomethacin (100 mg kg-1) was combined with aminoguanidine (100 mg kg-1), LPS-induced nitrite levels were significantly attenuated. NO precursor, L-arginine, was added to this combination in order to test the inhibition of iNOS activity which resulted in no change in nitrite levels. An indomethacin and aminoguanidine combination increased mortality twofold when compared to the control. The addition of L-arginine to the combination enhanced the mortality rate to 1.5-fold. These results suggest that NO appears to play a role in the LPS-induced septic shock model in mice. The improvement in sepsis-induced mortality enhanced by aminoguanidine by the inhibition of iNOS but not with the other agents or combinations should be re-evaluated in order to make an appropriate choice of the therapeutic target. In addition, it may also suggest that other mediators, such as arachidonic acid products and cytokines play a role in septic shock pathogenesis as well. (c) 1998 The Italian Pharmacological Society.