Wastewater treatment and biodiesel production by Scenedesmus obliquus in a two-stage cultivation process.

The microalga Scenedesmus obliquus was cultured in two cultivation stages: (1) in batch with real wastewater; (2) maintaining the stationary phase with different conditions of CO2, light and salinity according to a factorial design in order to improve the lipid content. The presence of the three factors increased lipid content from 35.8% to 49% at the end of the second stage; CO2 presence presented the highest direct effect increasing lipid content followed by light presence and salt presence. The ω-3 fatty acids content increased with CO2 and light presence acting in isolation, nevertheless, when both factors acted together the interaction effect was negative. The ω-3 eicosapentaenoic acid content of the oil from S. obliquus slightly exceeded the 1% maximum to be used as biodiesel source (EU normative). Therefore, it is suggested the blend with other oils or the selective extraction of the ω-3 fatty acids from S. obliquus oil.

Influence of light presence and biomass concentration on nutrient kinetic removal from urban wastewater by Scenedesmus obliquus.

This work was aimed at studying the effect of light-darkness and high-low biomass concentrations in the feasibility of removing nitrogen and phosphorus from urban treated wastewater by the microalga Scenedesmus obliquus. Laboratory experiments were conducted in batch, where microalgae were cultured under different initial biomass concentrations (150 and 1500mgSSl(-1)) and light conditions (dark or illuminated). Nutrient uptake was more dependent on internal nutrient content of the biomass than on light presence or biomass concentration. When a maximum nitrogen or phosphorus content in the biomass was reached (around 8% and 2%, respectively), the removal of that nutrient was almost stopped. Biomass concentration affected more than light presence on the nutrient removal rate, increasing significantly with its increase. Light was only required to remove nutrients when the maximum nutrient storage capacity of the cells was reached and further growth was therefore needed. Residence times to maintain a stable biomass concentration, avoiding the washout of the reactor, were much higher than those needed to remove the nutrients from the wastewater. This ability to remove nutrients in the absence of light could lead to new configurations of reactors aimed to wastewater treatment.

Photobiotreatment model (PhBT): a kinetic model for microalgae biomass growth and nutrient removal in wastewater.

This article proposes a kinetic model for wastewater photobiotreatment with microalgae (the PhBT model). The PhBT model for nutrient uptake, coupled with the Verhulst growth model, is a simple and useful tool to describe batch experiments of nutrient removal by microalgae. The model has been validated with experiments of Chlorella vulgaris (C. vulgaris) grown in wastewater and different synthetic media. The model provided information about nitrogen and phosphorus limitation and their luxury uptake during the test. Productivity observed in synthetic medium (0.17 g SS L(-1) d(-1)) was similar to that obtained in nutrient enriched wastewater (0.15 g SS L(-1) d(-1)). Biomass productivity of this alga in wastewater and the efficient nutrient removal suggested that C. vulgaris could be cultured in wastewater for biomass production while nutrients are reduced from this stream.

Performance of a flat panel reactor in the continuous culture of microalgae in urban wastewater: prediction from a batch experiment.

A laboratory-scale flat panel photobioreactor was operated for the continuous growth of Scenedesmus obliquus and consequent removal of nutrients in wastewater. This study develops a simple model by which biomass values in continuous operation can be predicted from kinetic growth parameters obtained from a shorter batch experiment. Based on this study, biomass concentrations and productivities in continuous operation can be successfully predicted as a function of the specific hydraulic retention time (HRT) assumed. Considerable biomass production and nutrient uptake from wastewater were achieved in the experiment. Optimum operating conditions for the reactor depend on the particular objective: the maximization of biomass production and carbon dioxide biofixation involves a HRT of 2 µ(-1) (specific growth rate), whereas efficient nutrient removal involves a HRT as close as possible to µ(-1) (as long as discharges comply fully with the parameters set); alternatively biomass intended for biodiesel or biogas production would involve a HRT > 2 µ(-1).