RESUMO
We present a simple to process tunable laser, fabricated in a low-cost generic fabrication process and based on two coupled Fabry-Perot cavities. The complex coupling coefficients of the coupling element are analytically derived from a 3×3 MMI using coupled mode theory and chosen to maximize the SMSR during lasing operation. Additionally, one of the cavities contains a reflective interferometer, which acts as coarse wavelength selector. This interferometer is derived from a Michelson Interferometer, by replacing the two independent mirrors with our optimized coupling element, leading to a doubled Free Spectral Range. As a result, we obtained a tuning range of 26 nm with potential for beyond 40 nm, a SMSR larger than 40 dB and fiber coupled power up to 9 dBm.
RESUMO
Generic InP foundry processes allow monolithic integration of active and passive elements into a common p-n doped layerstack. The passive loss can be greatly reduced by restricting the p-dopant to active regions. We report on a localized Zn-diffusion process based on MOVPE, which allows to reduce waveguide loss from 2 dB/cm to below 0.4 dB/cm. We confirm this value by fabrication of a 73 mm long spiral ring resonator, with a record quality factor of 1.2 million and an extinction ratio of 9.7 dB.
RESUMO
An ultrasmall (<10 µm length) polarization converter in InP membrane is fabricated and characterized. The device relies on the beating between the two eigenmodes of chemically etched triangular waveguides. Measurements show a very high polarization conversion efficiency of >99% with insertion losses of <-1.2 dB at a wavelength of 1.53 µm. Furthermore, our design is found to be broadband and tolerant to dimension variations.
