Assessment of bone regeneration after maxillary radicular cyst enucleation with or without bone grafting materials: a retrospective cohort study.

OBJECTIVE: The limitations of spontaneous bone healing underscore the necessity for exploring alternative strategies to enhance bone regeneration in maxillary radicular cyst cases. This retrospective study aimed to assess the impact of a bone substitute material (i.e., Bio-Oss) on bone volume regeneration following maxillary radicular cyst enucleation using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Seventy-three patients with maxillary radicular cysts were divided into two groups: one undergoing guided bone regeneration (GBR) with Bio-Oss and absorbable collagen membrane (n = 35), and the other receiving cyst excision alone (n = 38). Volumetric measurements using Amira software on CBCT scans evaluated bone regeneration, with cystic lesion shrinkage rates calculated. Intergroup comparisons utilized independent sample t-tests (P < 0.05), and linear regression analysis assessed the influence of preoperative cyst volume and group on bone healing. RESULTS: Both groups showed similar success rates in bone formation at the 12-month follow-up, with no significant differences between them (mean (SD), control: 75.16 (19.17) vs. GBR: 82 (20.22), P > 0.05). Linear regression analysis revealed a negative correlation between preoperative cyst volume and bone regeneration in both groups (P < 0.05). CONCLUSION: Bio-Oss may not significantly enhance bone augmentation in maxillary radicular cysts. In addition, preoperative cyst volume negatively affected the shrinkage rate of cystic lesions. CLINICAL RELEVANCE: Clinicians should consider patient-specific factors such as anatomy and lesion size when determining the need for bone substitute materials. Future research could focus on optimizing treatment protocols and alternative regenerative strategies to improve patient outcomes in maxillary cyst cases.

Influence of Calcified Canals Localization on the Accuracy of Guided Endodontic Therapy: A Case Series Study.

This study aimed to evaluate the precision of the guided endodontic technique applied to calcified canals in anterior teeth in relation to demographic and dental variables. The present observational study was conducted during the period 2020-2021. The patients were consecutive referrals at the Department of Endodontics and Conservative Dentistry of the University Hospital of Siena. The guided endodontics protocol was applied using 0.75 mm diameter burs for the lower teeth and 0.90 mm for the upper teeth. The inclusion criteria were as follows: (i) teeth with pulp canal obliteration (PCO) associated with a periapical lesion (periapical index (PAI) ≥ 2); (ii) teeth with PCO that require the placement of a root canal post for the execution of a prosthetic treatment; (iii) teeth in which surgical treatment was not justified. Socio-demographic characteristics of the patients were recorded and related to the drill path accuracy through the guide in the calcified endodontic canal, evaluated through a radiographic analysis, and classified as optimal (in the center of the root canal) and acceptable (deviated peripherally/tangentially). A logistic regression model was built to predict the factors that influence the poor precision of the technique. Seventeen patients (mean age 48 years) with eighteen calcified single-rooted teeth were enrolled. All teeth were associated with periapical lesions with PAI scores from 2 to 5 (mean PAI: 3.055). From the model, it is evident that the presence of a calcification affecting the apical area of the root increases the probability of being off-center with the bur by about 15 times. In addition, a previous attempt at endodontic treatment and the position in the lower arch increases the probability of non-centrality of the drill, although in a non-statistically significant way. In any of the analyzed cases, the guided endodontic technique applied to PCO did not determine the presence of iatrogenic errors, such as perforations. However, the apical localization of the obliteration increases the probability of being off-center with the drill during the instrumentation phase by about 15 times.

Sealing ability of two root-end filling materials at different retro-preparation lengths.

PURPOSE: The aim of the present study was to evaluate the sealing performance, expressed as microleakage (ML), of two root-end filling materials when used at different retro-preparation lengths. METHODS: Fifty single-rooted human teeth were collected for the study. The teeth were cut at the cement-enamel junction and endodontic treatment was performed. Each root was cut at 3 mm from the apex and then stored in wet condition. The teeth were divided into three groups according to the retro-preparation length: control group (no retro-preparation); group 1 (retro-preparation of 3 mm); group 2 (retro-preparation of 9 mm). The teeth were equally allocated to either Biodentine or Super EBA treatment group. The teeth were immersed in 3% methylene blue dye solution for 24 h. The samples were split longitudinally and the depth of dye penetration was examined through light microscopy. RESULTS: No significant statistical differences were found at different retro-preparation lengths (P > 0.05). Differences were found between materials (P > 0.05). CONCLUSION: Biodentine showed significantly lower ML when compared to Super-EBA and no statistical significative differences were observed when samples were retro-prepared at 3 mm or 9 mm.

A 12-month follow-up of primary and secondary root canal treatment in teeth obturated with a hydraulic sealer.

OBJECTIVES: This randomized, controlled, pilot study assessed the outcome of non-surgical primary/secondary root canal treatments either with a novel bioactive sealer and the single-cone technique or with gutta-percha, zinc oxide-eugenol sealer (ZOE), and warm vertical compaction. MATERIALS AND METHODS: Sixty-nine patients were randomly divided into two groups that were treated using the single-cone technique with BioRootTM RCS (Septodont) (BIO group) or warm vertical compaction with gutta-percha and ZOE sealer (PCS group). Two subsamples (BIOAP and PCSAP) comprised the cases with apical periodontitis. Treatment was undertaken by four residents using a standardized instrumentation and disinfection protocol. The periapical index (PAI) was recorded, and clinical and radiographic follow-up performed at 1, 3, 6, and 12 months. Treatment success was assessed according to "periapical healing" and "tooth survival". The test for the equality of proportions, t tests for the equality of means, and non-parametric K-sample tests for the equality of medians were applied when appropriate. RESULTS: The survival rate was similar in the BIO and PCS (p = 0.4074) and the BIOAP and PCSAP groups (p = 0.9114). The success rate was higher in the BIO groups, but not statistically significant (p = 0.0735). In both BIOAP and PCSAP groups, a progressive decrease in the PAI was observed. CONCLUSION: At 12 months, both techniques showed reliable results. Further studies and longer follow-ups are needed. CLINICAL RELEVANCE: This study documents the feasibility of using a bioactive sealer in conjunction with the single-cone technique to obturate the root canal and obtaining a predictable outcome. TRIAL REGISTRATION: ClinicalTrials.gov Identifie: NCT04249206.

Influence of proper or reciprocating optimum torque reverse kinematics on cyclic fatigue of four single files.

AIM: The aim of the present study was to evaluate the resistance to cyclic fatigue of heat-treated single files used in proper or in reciprocating optimum torque reverse motions. METHODS: Ninety-six HyFlex electrical discharge machining (EDM), Reciproc R25 (Rec), WaveOne Primary (WO), and WaveOne Gold (WOG) Primary were used. Resistance to cyclic fatigue was determined by recording time to fracture in a stainless steel artificial canal. Differential scanning calorimetric analysis was performed. Data were analyzed by two-way analysis of variance and Bonferroni post-hoc tests at 0.05. RESULTS: In both movements, HyFlex EDM showed higher time to fracture than other files (P < 0.0001). Rec showed higher time to fracture than WO (P < 0.0001), while WOG showed higher cyclic fatigue resistance than Rec and WO with both movements (P < 0.005). CONCLUSIONS: Reciprocating optimum torque reverse motion improved significantly cyclic fatigue resistance of gold and controlled memory wire single files.

Influence of Continuous or Reciprocating Optimum Torque Reverse Motion on Cyclic Fatigue Resistance of Two Single-File Nickel-Titanium Rotary Instruments.

OBJECTIVE: Different single-file instruments and kinematics have been introduced on the market. It is important to know the cyclic fatigue performance of these instruments in these new kinematics such as reciprocation of Optimum Torque Reverse (OTR) motion. The aim of this study was to evaluate the resistance to cyclic fatigue of F6 SkyTaper and OneShape used in continuous rotation (proper rotation) or in reciprocating OTR motion. METHODS: A total of forty-eight nickel-titanium files were tested. Twenty-four instruments of both brands were divided into two groups (n=12) on the basis of the motion tested: continuous rotation (group 1) or reciprocating OTR motion (group 2). Resistance to cyclic fatigue was determined by recording time to fracture (TtF) in a stainless steel artificial canal with a 60° angle of curvature and 5 mm radius of curvature. Data were analysed by two-way analysis of variance and post-hoc Bonferroni tests for multiple comparisons with P<0.05 as the level of significance. RESULTS: F6 SkyTaper showed higher TtF compared with OneShape, both in continuous and in OTR motion (P<0.0001). The two tested instruments showed higher cyclic fatigue resistance in reciprocating OTR motion than continuous rotation (P<0.0001). CONCLUSION: OTR motion significantly improves cyclic fatigue resistance of the tested instruments. In addition, F6 SkyTaper showed higher cyclic fatigue resistance than OneShape in both motions.

Antimicrobial effect of MTAD, Tetraclean, Cloreximid, and sodium hypochlorite on three common endodontic pathogens.

OBJECTIVES: The aim of this in vitro study was to evaluate the antimicrobial action of BioPure MTAD (Dentsply Tulsa Dental, Johnson City, TN), Tetraclean, Cloreximid (a mixture of Chlorhexidine (CHX) digluconate and Cetrimide), and 5.25% NaOCl (Ogna Laboratori Farmaceutici, Milano, Italy) against selected endodontic pathogens (Enterococcus faecalis, Porphyromonas gingivalis, and Prevotella intermedia). MATERIALS AND METHODS: The agar plate diffusion procedure was used to observe the antimibrobial activity of irrigants. RESULTS: Statistical analysis revealed significant effects of the different irrigants on the bacteria colonies. Treatment with 5.25% NaOCl induced a larger zone of microbial inhibition in Prevotella intermedia and Porphyromonas gingivalis (Tukey HSD post-test, P = 0.0001) when compare to MTAD, Tetraclean and CHX. Anyway, MTAD and Tetraclean were more effective to inhibit bacterial growth compared to CHX (P < 0.0001, Tukey HSD post-test). Furthermore, post hoc analysis revealed that MTAD and Tetraclean induced the largest zone of microbial inhibition of Enterococcus faecalis cultured under both aerobic and anaerobic conditions, when compared with 2% CHX and NaOCl (P < 0.0001, Tukey HSD post-test). The control group showed no microbial inhibition. CONCLUSION: 5.25% NaOCl showed a high antimicrobial activity against anaerobic bacteria. MTAD and Tetraclean showed a high action against both, strictly anaerobic and facultative anaerobic bacteria. Chlorexidine + Cetrimide (Cloreximid) showed the lowest antibacterial activity against both, facultative and strictly anaerobic bacteria tested.

An in vitro and ex vivo study on two antibiotic-based endodontic irrigants: a challenge to sodium hypochlorite.

Amongst the bacterial species which most often cause endodontic failures, Enterococcus faecalis is the most important. This study compared the effectiveness of sodium hypochlorite and two new generation antibiotic-based endodontic irrigants, Tetraclean and MTAD. By means of an in vitro agar dilution assay, we show that both Tetraclean and MTAD are 100% effective against 54 clinical isolates at dilutions up to 1:256 and 1:1048, respectively, whereas sodium hypochlorite completely loses its effectiveness when diluted more than 32 times. The bactericidal effect of both Tetraclean and MTAD can be ascribed not just to their antibiotic component per se, but also to a synergistic effect among the several ingredients included in the formulations. Moreover, by an ex vivo model of teeth extracted and experimentally infected with E. faecalis ATCC 29212, we show that both the antibiotic-based endodontic irrigants are effective in eliminating bacterial cells in 93 to 100% of the test samples. The results of these pre-clinical studies strongly support a wider use of this new group of endodontic irrigants in daily clinical practice.

Comparative in vitro and ex vivo studies on the bactericidal activity of Tetraclean, a new generation endodontic irrigant, and sodium hypochlorite.

The aim of this study was to compare the efficacy of a new generation endodontic irrigant, Tetraclean, to the widely used sodium hypochlorite. Tetraclean combines a powerful detergent effect with a strong antimicrobial efficacy, whereas sodium hypochlorite has several drawbacks and is sometimes ineffective in preventing microbial-mediated endodontic failure. The bactericidal activity of both irrigants against Enterococcus faecalis, the most commonly isolated species from root canals of teeth with post-treatment disease, was assessed i) in vitro, according to the European Standard lines for the evaluation of the bactericidal activity of chemical disinfectants, and ii) with an ex vivo model of extracted and decoronated human teeth, infected with E. faecalis and subsequently irrigated with either of the irrigants. Both irrigants display very similar bactericidal activity against E. faecalis in vitro. However, the ex vivo model shows that only in the teeth irrigated with Tetraclean did the bacterial burden gradually drop until no bacteria were detectable a few days post-irrigation. Vice versa, in the teeth irrigated with sodium hypochlorite, the drop in the bacterial burden was rapid but temporary and most of the teeth were colonized again by 48 hours post-irrigation.

Surface tension comparison of four common root canal irrigants and two new irrigants containing antibiotic.

The aim of this study is to compare the surface tension of four common endodontic irrigants: Moltendo EDTA 17%, Cetrexidin, Smear Clear, Sodium hypochlorite 5.25%, with the surface tension of MTAD and Tetraclean. Freshly produced MilliQ water was used as a reference. All measurements were performed following the Wilhelmy plate technique, using a Cahn DCA-322 Dynamic Contact Angle Analyzer at the temperature of 22 degrees C. MilliQ water, sodium hypochlorite 5.25%, and EDTA 17% had the highest surface tension, whereas those of Cetrexedin and Tetraclean has shown the lowest surface tension value. Both new irrigants, MTAD and Tetraclean, are capable of removing the smear layer. Thanks to their low surface tension, increasing the intimate contact of irrigant solutions with the dentinal walls, they may permit deeper penetration.