Polyaniline-Coated Na3V2(PO4)2F3 Cathode Enables Fast Sodium Ion Diffusion and Structural Stability in Rechargeable Batteries.

Na3V2(PO4)2F3 (NVPF), a typical sodium superionic conductor (NASICON) type structure, has attracted much interest as a potential positive electrode in sodium-ion battery. However, the inherently poor electronic conductivity of phosphates compromises the electrochemical properties of this material. Here, we develop a general strategy to improve the electrochemical performance by preparing a new composite material "polyaniline (PANI)@NVPF" using a Pickering emulsion method. The X-ray diffraction and Raman results indicated a successful PANI coating without affecting the NASICON-type structure of NVPF, and they enhanced the interfacial bonding between the two components. Also, thermogravimetric analysis and scanning electron microscopy analyses revealed that the PANI content influenced the thermal stability and morphology of the nanocomposites. As a result, the sodium test cells exhibited multielectron reactions and a better rate performance for PANI@NVPF nanocomposites as compared to NVPF. Specifically, 2%PANI@NVPF maintained 70% of its initial capacity at 5C. Ex-situ electron paramagnetic resonance revealed the existence of mixed valence states of vanadium (V4+/V3+) in both discharge and charge processes. Consequently, the successful PANI coating into the sodium superionic conductor framework improved the sodium diffusion channels with a measurable increase of diffusion coefficients with cycling (ca. 3.25 × 10-11 cm2 s-1). Therefore, PANI@NVPF nanocomposites are promising cathode candidates for high-rate sodium-ion battery applications.

Anionic Dye Removal with a Thin Cationic Polyaniline Coating on Cellulosic Biomaterial.

This paper reports the development of novel adsorbent materials using polyaniline (PANI) grafted onto Posidonia (POS) fibers, aimed at efficiently removing phenol red (PSP), an anionic dye, from aqueous solutions. The synthesis involved the copolymerization of aniline grafted on the surface of the POS and aniline monomer in solution, resulting in a chemically bound thin PANI layer on the POS bioadsorbent. Structural characteristics and binding affinities of these adsorbents with PANI under its emeraldine salt (POS@PANI-ES) or emeraldine base (POS@PANI-EB) forms are reported. The rapid adsorption kinetics observed are attributed to enhanced accessibility to PANI adsorption sites on the POS surface. The binding percentages of PSP to POS@PANI-ES and POS@PANI-EB materials were found to be 97 and 50%, respectively, after 15 min of contact time. The Langmuir model for localized adsorption sites and the Volmer model for nonlocalized adsorption as a mobile layer were fitted to the experimental adsorption isotherms of PSP to POS@PANI-EB and POS@PANI-ES, yielding the thermodynamic parameters of adsorption. The adsorption capacities of PSP on POS@PANI-EB and POS@PANI-ES were 37.8 and 71.5 µmol g-1, respectively. The adsorption of PSP remained above 80% at moderate salt concentrations of around 0.1 mol L-1; however, higher concentrations of NaCl and CaCl2 in PSP solutions significantly reduced the adsorption on POS@PANI-ES.

Versatile anti-infective properties of pyrido- and dihydropyrido[2,3-d]pyrimidine-based compounds.

A series of 1H-indeno[2',1':5,6]dihydropyrido[2,3-d]pyrimidine and 1H-indeno[2',1':5,6]pyrido[2,3-d]pyrimidine derivatives was prepared and screened for antiparasitic and viral RNase H inhibitory activity. Several compounds showed considerable activity against Toxoplasma gondii parasites and Leishmania major amastigotes, which warrants further investigation. Based on the structural similarities of certain derivatives with common viral RNase H inhibitors, a HIV-1 RNase H assay was used to study the RNase H inhibition by selected test compounds. Docking of active derivatives into the active site of the HIV-1 RNase H enzyme was carried out. The new compound 2a, inactive in the antiparasitic tests, showed distinct HIV-1 RNase H inhibition. Thus, ring substitution determines antiparasitic or HIV-1 RNase H inhibitory activity of this promising compound class.

Low-cost Posidonia oceanica bio-adsorbent for efficient removal of antibiotic oxytetracycline from water.

The presence of antibiotics as micro-contaminants in the water and aqueous environments is a health concern to humans and the ecosystem. Therefore, their elimination by adsorption to available and cheap materials in water treatment plants is a research topic of high relevance. The present paper reports on the adsorption behavior of oxytetracycline on a bio-adsorbent prepared from Posidonia oceanica; an abundant Mediterranean biomass. Characterization of the pretreated Posidonia biomaterial was achieved using several analyses such as Boehm acid-base titration method, pHPZC determination, and analysis techniques (FTIR, 13C CP-MAS NMR, optical microscopy, and TGA). The pHPZC occurred around pH 2.11. Posidonia biomaterial showed a fast and high uptake rate throughout the adsorption process, which is a definite advantage for analytical applications such as water decontamination. The experimental kinetic data fitted very rightly the pseudo-second-order kinetic model and the equilibrium uptake can adopt the bi-Langmuir isotherm model for all studied pH values which assumes adsorptions at the two localized sites. Maximum adsorption capacities of 11.8 mg∙g-1 and 4.4 mg∙g-1 for the two adsorption sites are reached at pH 6. The oxytetracycline adsorption process onto Posidonia bio-adsorbent is spontaneous (ΔadsG0 < 0), exothermic (ΔadsH0 < 0), and entropically favorable (ΔadsS0 > 0). The effect of pH on adsorption behavior and the thermodynamic parameters of adsorption are consistent with a possible origin of adsorption of oxytetracycline by means of hydrogen bonding interactions between surface hydroxyl and phenolic groups of the biomaterial and oxytetracycline. The proposed green and environmentally friendly biomaterial offers potential benefits as a bio-adsorbent in the remediation of aquatic environments contaminated by various organic materials.

Development of metal hydroxide nanoparticles from eggshell waste and seawater and their application as flame retardants for ethylene-vinyl acetate copolymer (EVA).

Recently, calcium hydroxide and magnesium hydroxide nanoparticles have attracted a lot of research interest in different sectors: food, packaging, health, automotive construction and food application. In the present study, we report development of bio-material calcium hydroxide nanoparticles (Ceg-Ca(OH)2), obtained from chicken eggshell collected from the food industries as well as magnesium hydroxide nanoparticles obtained from seawater (Seaw-Mg(OH)2). The flame-retardant behavior of Ethylene-Vinyl Acetate copolymer (EVA) containing different blends of Ceg-Ca(OH)2 and Seaw-Mg(OH)2 nanoparticles has been evaluated using cone calorimeter. Our results showed the interest of combining both nanoparticles. In fact, the partial substitution of small Seaw-Mg(OH)2 content (10 wt%) by Ceg-Ca(OH)2 enables further reduction of pHRR from 251 to 206 kW/m2 without any reduction of the composite time to ignition (52 s). Furthermore, the partial substitution of 40 wt% Seaw-Mg(OH)2 nanoparticles by Ceg-Ca(OH)2 enables high flame retardant effect as well as the generation of cohesive residue.

Synthesis and Structural, Electrical, and Magnetic Properties of New Iron-Aluminum Alluaudite Phases ß-Na2Ni2M(PO4)3 (M = Fe and Al).

Herein we report the studies of different physical properties (structural, magnetic, thermal, morphologic, electrical, and electrochemical) of two new allotropic ß-Na2Ni2M(PO4)3 (NNMP) phosphates, with M = Fe and Al. Pure orthorhombic single-phase powders were prepared under air, using an autocombustion synthesis method. They crystallize in the orthorhombic Imma space group with similar unit cell parameters [a = 10.1592(2), b = 13.0321(3), c = 6.4864(2) Å] and [a = 10.3993(1), b = 13.1966(1), c = 6.4955(1) Å] for ß-Na2Ni2M(PO4)3 (NNAP) and ß-Na2Ni2Fe(PO4)3 (NNFP), respectively. Crystal structures of both compounds were determined using X-ray powder diffraction and Rietveld method refinements, which indicate the occurrence of Ni2+ in the 8g site, and of M3+ in the 4a site of the structure. The structure consists of a three-dimensional anionic framework obtained by the association on MO6, NiO6, and PO4 polyhedra, sharing edges and corners. The resulting three-dimensional structure creates monodimensional channels along the [100] and [010] directions formed by face-shared oxygen polyhedra and occupied by Na+ cations. This nondisordered cationic distribution is confirmed by a significant change of magnetic properties. Thus, both NNAP and NNFP samples show paramagnetic to ferromagnetic transition at 14 and 19 K, respectively. For the two compounds, thermal stability, electrical conductivity, and electrochemical properties have been also investigated. The intercalation/desintercalation properties of NNMP compounds as positive electrode were tested in sodium-ion batteries. The first cycling curves exhibit a significant polarization for both prepared samples.