Evaluation of resistance patterns and bioremoval efficiency of hydrocarbons and heavy metals by the mycobiome of petroleum refining wastewater in Jazan with assessment of molecular typing and cytotoxicity of Scedosporium apiospermum JAZ-20.

Jazan Industrial Economic City (JIEC) is located on the Red Sea coast in the province of Jazan, southwest of Saudi Arabia anchors diverse heavy and secondary industries in the energy, water desalination, petroleum, aluminum, copper, refineries, pharmaceuticals and food manufacturing fields. These various industries generate a large quantity of industrial wastewaters containing various toxicants. The present work represents ecologically beneficial alternatives for the advancement of environmental biotechnology, which could help mitigate the adverse impacts of environmental pollution resulting from petroleum refining effluents. The mycobiome (32 fungal strains) isolated from the industrial wastewater of the refinery sector in Jazan were belonged to five fungal genera including Fusarium, Verticillium, Purpureocillium, Clavispora and Scedosporium with a distribution percentage of 31.25, 21.88, 15.63, 12.50 and 18.75 %, respectively. These isolates showed multimetals tolerance and bioremoval efficiency against a large number of heavy metals (Fe2+, Ni2+, Cr6+, Zn2+, As3+, Cu2+, Cd2+, Pb2+, Ag+ and Hg2+) along with potent bioremediation activity toward crude oil and the polycyclic aromatic hydrocarbons. Interestingly, the mycobiome resistance patterns obtained against different classes of fungal antibiotics including azole (fluconazole, itraconazole, voriconazole, posaconazole, isavuconazole and ketoconazole), echinocandin (anidulafungin, caspofungin and micafungin) and polyene (amphotericin B) drugs proved the prevalence of antibiotic resistance among the mycobiome of refinery industry in Saudi Arabia is relatively low. The fungal isolate under isolation code JAZ-20 showed the highest bioremoval efficiency against heavy metals (90.8-100.0 %), crude oil (89.50 %), naphthalene (96.7 %), phenanthrene (92.52 %), fluoranthene (100.0 %), anthracene (90.34 %), pyrene (85.60 %) and chrysene (83.4 %). It showed the highest bioremoval capacity ranging from 85.72 % to 100.0 % against numerous pollutants found in a wide array of industrial effluents, including diclofenac, ibuprofen, carbamazepine, acetaminophen, sulfamethoxazole, bisphenol, bleomycin, vincristine, dicofol, methyl parathion, atrazine, diuron, dieldrin, chlorpyrifos, profenofos and phenanthrene. The isolate JAZ-20 was chosen for molecular typing, cytotoxicity assessment, analysis of volatile compounds and optimization investigations. Based on phenotypic, biochemical and phylogenetic analysis, strain JAZ-20 identified as Scedosporium apiospermum JAZ-20. This strain is newly discovered in industrial effluents in Saudi Arabia. Fungal strain JAZ-20 consistently produced various types of saturated and unsaturated fatty acids. the main fatty acids were C14:0 (1.95 %), iso-C14:0 (2.98 %), anteiso-C14:0 (2.13 %), iso-C15:0 (9.16 %), anteiso-C15:0 (11.75 %), C15:0 (7.42 %), C15:1 (2.37 %), anteiso-C16:0 (3.4 %), C16:0 (10.3 %), iso-C16:0 (9.5 %), C17:1 (1.36 %), anteiso-C17:1 (8.64 %), iso-C18:0 (11.0 %), C18:0 (3.63 %), anteiso-C19:0 (3.78 %), anteiso-C20:0 (2.0 %), iso-C21:0 (2.44 %), C23:0 (1.15 %), and C24:0 (2.17 %). These fatty acids serve as natural and eco-friendly antifungal agents, promoting fungal resistance and inhibiting the production of mycotoxins in the environment. Despite being an environmental isolate, its cytotoxicity was assessed against both normal and cancerous human cell lines. The IC50 values of JAZ-20 extract were 8.92, 10.41, 20.0, 16.5, and 40.0 µg/mL against WI38, MRC5, MCF10A, HEK293 and HDFs normal cells and 43.26, 33.75, and 40.0 µg/mL against liver (HepG2), breast (A549) and cervix (HeLa) cancers, respectively. Based on gas chromatography-mass spectrometry (GC-MS), analysis the extract of S. apiospermum JAZ-20 showed 47 known volatile compounds (VOCs) for varied and significant biological activities. Enhancing the bioremoval efficiency of heavy metals from actual refining wastewater involves optimizing process parameters. The parameters optimized were the contact time, the fungal biomass dosage, pH, temperature and agitation rate.

Mechanistic Investigation on the Antibacterial Activity of Biogenic Silver Nanoparticles Prepared Using Root Extract of Sarsaparilla and Demonstrated their In Vivo Efficacy in Zebrafish Model.

Antibiotic success rates are decreasing as drug-resistant bacteria become more prevalent, prompting the development of new therapeutic drugs. Herein, we demonstrated the antimicrobial activity of sarsaparilla root extract fabricated silver nanoparticles (sAgNPs). The UV-Visible spectra revealed that the surface Plasmon resonance maxima of sAgNPs were at 415 nm. Transmission electron microscopy confirms that the particles are spherical with size of 12-35 nm. The minimum inhibitory concentration (MIC) of sAgNPs against Escherichia coli, uropathogenic Escherichia coli, Pseudomonas aeruginosa, Enterococcus faecalis, Staphylococcus aureus, and methicillin-resistant Staphylococcus aureus was 62.5, 62.5, 62.5, 62.5, 125 and 125 µM, respectively. At 1X MIC, sAgNPs induces excess reactive oxygen species (ROS) production and disturbs the bacteria membrane intergity, causing cytoplamic membrane depolarization. Interestingly, antibacterial activity of sAgNPs was considerably reduced in the presence of an antioxidant, N-acetyl cysteine, suggesting that ROS-induced membrane damage is a plausible cause of cell death. In contrast to many studies that only report the in vitro activity of NPs, we determined the in vivo antibacterial efficacy using the zebrafish model. It was found that sAgNPs protect fish from infection by inhibiting bacterial growth and eliminating them from the fish. In addition, the catalytic potential of sAgNPs for wastewater decontamination was demonstrated by degrading organic pollutants such as methyl orange, congo red, reactive black, and acid blue. The pollutants degraded in less than 10 min, and the reaction follows pseudo-first-order kinetics. As a proof of concept, the catalytic potential of sAgNPs in degrading mixed dyes to satisfy industrial wastewater treatment needs was established. In summary, sAgNPs have the potential to act as nanocatalysts and nano-drugs, addressing key challenges in medical and environmental research.

Antimicrobial lipids loaded on lectin display reduced MIC, curtail pathogenesis and protect zebrafish from reinfection by immunomodulation.

Antibiotic resistance and re-emergence of highly resistant pathogens is a grave concern everywhere and this has consequences for all kinds of human activities. Herein, we showed that N-palmitoylethanolamine-derived cationic lipid (cN16E) had a lower minimum inhibitory concentration (MIC) against both Gram-positive and Gram-negative bacteria when it was loaded with Butea monosperma seed lectin (BMSL). The analysis using lectin-FITC conjugate labelling indicated that the improved antibacterial activity of BMSL conjugation was due to bacterial cell surface glycan recognition. Live and dead staining experiments revealed that the BMSL-cN16E conjugate (BcN16E) exerts antibacterial activity by damaging the bacterial membrane. BcN16E antimicrobial activity was demonstrated using an infected zebrafish animal model because humans have 70 % genetic similarity to zebrafish. BcN16E therapeutic potential was established successfully by rescuing fish infected with uropathogenic Escherichia coli (UPEC). Remarkably, the rescued infected fish treated with BcN16E prevented reinfection without further therapy, indicating BcN16E immunomodulatory potential. Thus, the study examined the expression of immune-related genes, including tnfα, ifnγ, il-1ß, il-4, il-10, tlr-2, etc. There was a significant elevation in the expression of all these genes compared to control and fish treated with BMSL or cN16E alone. Interestingly, when the rescued zebrafish were reinfected with the same pathogen, the levels of expression of these genes were many folds higher than seen earlier. Radial immune diffusion analyses (RIA) using zebrafish serum revealed antibody production during the initial infection and treatment. Interestingly, reinfected fish had significant immunoprecipitation in RIA, a feature absent in the groups treated with cN16E, BMSL, and control. These results clearly show that the BcN16E complex not only rescued infected zebrafish but also conferred long-lasting protection in terms of immunomodulation that protects against multiple reinfections. The findings support that BcN16E has immense potential as a novel immunostimulant for various biomedical applications.

Unveiling resilience: coelomic fluid bacteria's impact on plant metabolism and abiotic stress tolerance.

Earthworms' coelomic fluid (CF) has been discovered to possess properties that promote plant development. In particular, the earthworm's coelomic fluid-associated bacteria (CFB) are the primary factor influencing the plants' response. To investigate this, we used bacteria isolated from the CF and selected based on different plant growth-promoting traits, in a mesocosm ecosystem that includes plants. This experiment aimed to assess their impact on the metabolism of plants growing under abiotic stress environments (alkaline soil and nitrogen (N), phosphate (P), and potassium (K) deficit) and compare the lipid profiles of plants under the various treatments. We used seven different bacterial species isolated from the CF of Aporrectodea molleri and as a plant model Zea mays L. For the metabolomic analysis method, we used gas chromatography-mass spectrometry lipidomic. After observing the metabolomic profiles, we found that a few molecular pathways are involved in how plants react to bacterial biostimulants. The bacterial isolates belonging to Pantoea vagans, Pseudomonas aeruginosa, Bacillus paramycoides, and Bacillus thuringiensis have led to a significant increase in synthesizing several metabolites belonging to various chemical categories. Contrary to predictions, abiotic stress did not cause a drop in the composition and concentration of lipids in plants treated with the CFB, demonstrating the rigidity of the protective mechanisms. The statistical analysis based on the Pearson method revealed a positive significant correlation between plant growth parameters (length of the aerial part, surface of the leaves, and biomass) and some metabolites belonging to fatty acids, carboxylic acids, benzene derivatives, and alkanes. Moreover, the standard metabolic components of all treatments in much higher concentrations during bacterial treatments than the control treatment suggests that the bacteria have stimulated the overexpression of these metabolic components. According to these results, we could assume that plants treated with CFB exhibit an adaptability of abiotic stress defense mechanisms, which may be attributed to the upregulation of genes involved in lipid biosynthesis pathways.

Tannery effluent treatments with mangrove fungi, grass root biomass, and biochar.

Tannery effluents contain high amounts of polluting chemicals, such as salts and heavy metals released often to surface waters. New economic and eco-friendly purification methods are needed. Two adsorbing materials and five salt-tolerant fungal isolates from mangrove habitat were studied. Purification experiments were carried out using the pollutant adsorbents biochar and the biomass of vetiver grass (Chrysopogon zizanioides) roots and the fungi Cladosporium cladosporioides, Phomopsis glabrae, Aspergillus niger, Emericellopsis sp., and Scopulariopsis sp., which were isolated from mangrove sediment. They efficacy to reduce pollutants was studied in different combinations. Salinity, turbidity, total dissolved solids, total suspended solids, phenols, nitrogen, ammonia. Biological and chemical oxygen demand (BOD, COD) and several heavy metals were measured. The adsorbents were efficient reducing the pollutants to 15-50% of the original. The efficiency of the combination of biochar and roots was generally at the same level as the adsorbents alone. Some pollutants such as turbidity, COD and ammonium were reduced slightly more by the combination than the adsorbents alone. From all 14 treatments, Emericellopsis sp. with biochar and roots appeared to be the most efficient reducing pollutants to < 10-30%. BOD and COD were reduced to ca 5% of the original. The treatment was efficient in reducing also heavy metals (As, Cd, Cr, Mn Pb, Zn). The fungal species originating from the environment instead of the strains present in the tannery effluent reduced pollutants remarkably and the adsorbents improved the reduction efficiency. However, the method needs development for effluents with high pollutant concentrations to fulfil the environmental regulations.

Biodegradation of Polyurethane by Fungi Isolated from Industrial Wastewater-A Sustainable Approach to Plastic Waste Management.

Polyurethane (PU) is a type of polymer, which exists in various forms in the environment. Very few studies are available concerning the structure or enzymatic mechanism of the microbial community, which can degrade PU. Degradation of PU remains a difficult problem with respect to the environmental and biological disciplines. This study mainly focused on identifying the micro-organisms able to degrade polyurethane and confirming the degradation by performing a plate assay, Sturm test and scanning electron microscopy. Optimal culture conditions for maximum PU degradation were also analyzed through classical methods. A soil burial test was conducted by placing polyurethane films in the soil for one month, and the microbe growing on the surface of polyurethane films-with a maximum degradation of 55%-was isolated and identified as Aspergillus versicolor (ARF5). The culture medium was also optimized with different physical and chemical parameters for maximum PU degradation. The presence of CO2 as a by-product of PU biodegradation was confirmed through the Sturm test.

Diabetes-related lower limb wounds: Antibiotic susceptibility pattern and biofilm formation.

The expeditious incidence of diabetes mellitus in Riyadh, Saudi Arabia, there is a significant increase in the total number of people with diabetic foot ulcers. For diabetic lower limb wound infections (DLWs) to be effectively treated, information on the prevalence of bacteria that cause in this region as well as their patterns of antibiotic resistance is significant. Growing evidence indicates that biofilm formers are present in chronic DFU and that these biofilm formers promote the emergence of multi-drug antibiotic resistant (MDR) strains and therapeutic rejection. The current study targeted to isolate bacteria from wounds caused by diabetes specifically at hospitals in Riyadh and assess the bacterium's resistance to antibiotics and propensity to develop biofilms. Totally 63 pathogenic microbes were identified from 70 patients suffering from DFU. Sixteen (25.4%) of the 63 bacterial strains were gram-positive, and 47 (74.6%) were gram-negative. Most of the gram-negative bacteria were resistant to tigecycline, nitrofurantoin, ampicillin, amoxicillin, cefalotin, and cefoxitin. Several gram-negative bacteria are susceptible to piperacillin, meropenem, amikacin, gentamicin, imipenem, ciprofloxacin, and trimethoprim. The most significant antibiotic that demonstrated 100% susceptibility to all pathogens was meropenem. Serratia marcescens and Staphylococcus aureus were shown to have significant biofilm formers. MDR bacterial strains comprised about 87.5% of the biofilm former strains. To the best of our knowledge, Riyadh, Saudi Arabia is the first region where Serratia marcescens was the most common bacteria from DFU infections. Our research findings would deliver information on evidence-based alternative strategies to develop effective treatment approaches for DFU treatment.

Unraveling the shift in bacterial communities profile grown in sediments co-contaminated with chlorolignin waste of pulp-paper mill by metagenomics approach.

Pulp-paper mills (PPMs) are known for consistently generating a wide variety of pollutants, that are often unidentified and highly resistant to environmental degradation. The current study aims to investigate the changes in the indigenous bacterial communities profile grown in the sediment co-contaminated with organic and inorganic pollutants discharged from the PPMs. The two sediment samples, designated PPS-1 and PPS-2, were collected from two different sites. Physico-chemical characterization of PPS-1 and PPS-2 revealed the presence of heavy metals (mg kg-1) like Cu (0.009-0.01), Ni (0.005-0.002), Mn (0.078-0.056), Cr (0.015-0.009), Pb (0.008-0.006), Zn (0.225-0.086), Fe (2.124-0.764), Al (3.477-22.277), and Ti (99.792-45.012) along with high content of chlorophenol, and lignin. The comparative analysis of organic pollutants in sediment samples using gas chromatography-mass spectrometry (GC-MS) revealed the presence of major highly refractory compounds, such as stigmasterol, ß-sitosterol, hexadecanoic acid, octadecanoic acid; 2,4-di-tert-butylphenol; heptacosane; dimethyl phthalate; hexachlorobenzene; 1-decanol,2-hexyl; furane 2,5-dimethyl, etc in sediment samples which are reported as a potential toxic compounds. Simultaneously, high-throughput sequencing targeting the V3-V4 hypervariable region of the 16S rRNA genes, resulted in the identification of 1,249 and 1,345 operational taxonomic units (OTUs) derived from a total of 115,665 and 119,386 sequences read, in PPS-1 and PPS-2, respectively. Analysis of rarefaction curves indicated a diversity in OTU abundance between PPS-1 (1,249 OTUs) and PPS-2 (1,345 OTUs). Furthermore, taxonomic assignment of metagenomics sequence data showed that Proteobacteria (55.40%; 56.30%), Bacteoidetes (11.30%; 12.20%), and Planctomycetes (5.40%; 4.70%) were the most abundant phyla; Alphproteobacteria (20.50%; 23.50%), Betaproteobacteria (16.00%; 12.30%), and Gammaproteobacteria were the most recorded classes in PPS-1 and PPS-2, respectively. At the genus level, Thiobacillus (7.60%; 4.50%) was the most abundant genera grown in sediment samples. The results indicate significant differences in both the diversity and relative abundance of taxa in the bacterial communities associated with PPS-2 when compared to PPS-1. This study unveils key insights into contaminant characteristics and shifts in bacterial communities within contaminated environments. It highlights the potential for developing efficient bioremediation techniques to restore ecological balance in pulp-paper mill waste-polluted areas, stressing the importance of identifying a significant percentage of unclassified genera and species to explore novel genes.

Versatility of copper-iron bimetallic nanoparticles fabricated using Hibiscus rosa-sinensis flower phytochemicals: various enzymes inhibition, antibiofilm effect, chromium reduction and dyes removal.

Bimetallic nanoparticles (NPs) are considered superior in terms of stability and function with respect to its monometallic counterparts. Hence, in the present study Hibiscus rosa-sinensis flower extract was used to synthesis copper-iron bimetallic nanoparticles (HF-FCNPs). HF-FCNPs was characterized and its applications (biological and environmental) were determined. HF-FCNPs were spherical in shape with high percentage of copper inducted into the NPs. HF-FCNPs inhibited mammalian glucosidases [maltase (IC50: 548.71 ± 61.01 µg/mL), sucrase (IC50: 441.34 ± 36.03 µg/mL), isomaltase (IC50: 466.37 ± 27.09 µg/mL) and glucoamylase (IC50: 403.12 ± 14.03 µg/mL)], alpha-amylase (IC50: 16.27 ± 1.73 µg/mL) and acetylcholinesterase [AChE (IC50: 0.032 ± 0.004 µg/mL)] activities. HF-FCNPs showed competitive inhibition against AChE, maltase and sucrase activities; mixed inhibition against isomaltase and glucoamylase activities; whereas non-competitive inhibition against α-amylase activity. HF-FCNPs showed zone of inhibition of 16 ± 2 mm against S. mutans at 100 µg/mL concentration. HF-FCNPs inhibited biofilm formation of dental pathogen, S. mutans. SEM and confocal microscopy analysis revealed the disruption of network formation and bacterial cell death induced by HF-FCNPs treatment on tooth model of S. mutans biofilm. HF-FCNPs efficiently removed hexavalent chromium in pH-independent manner and followed first order kinetics. Through Langmuir isotherm fit the qmax (maximum adsorption capacity) was determined to be 62.5 mg/g. Further, HF-FCNPs removed both anionic and cationic dyes. Altogether, facile synthesis of HF-FCNPs was accomplished and its biological (enzyme inhibition and antibiofilm activity) and environmental (catalyst to remove pollutants) applications have been understood.

Antioxidant, antibacterial, and molecular docking of methyl ferulate and oleic acid produced by Aspergillus pseudodeflectus AUMC 15761 utilizing wheat bran.

Secondary metabolites (SMs) are the primary source of therapeutics and lead chemicals in medicine. They have been especially important in the creation of effective cures for conditions such as cancer, malaria, bacterial and fungal infections, neurological and cardiovascular problems, and autoimmune illnesses. In the present study, Aspergillus pseudodeflectus AUMC 15761 was demonstrated to use wheat bran in solid state fermentation (SSF) at optimum conditions (pH 7.0 at 30 °C after 10 days of incubation and using sodium nitrate as a nitrogen source) to produce methyl ferulate and oleic acid with significant antioxidant and antibacterial properties. Gas chromatography-mass spectrometry (GC-MS) analysis of the crude methanol extract revealed eleven peaks that indicated the most common chemical components. Purification of methyl ferulate and oleic acid was carried out by column chromatography, and both compounds were identified by in-depth spectroscopic analysis, including 1D and 2D NMR and HR-ESI-MS. DPPH activity increased as the sample concentration increased. IC50 values of both compounds obtained were 73.213 ± 11.20 and 104.178 ± 9.53 µM, respectively. Also, the MIC value for methyl ferulate against Bacillus subtilis and Staphylococcus aureus was 0.31 mg/mL, while the corresponding MIC values for oleic acid were 1.25 mg/mL and 0.62 mg/mL for both bacterial strains, respectively. Molecular modeling calculations were carried out to reveal the binding mode of methyl ferulate and oleic acid within the binding site of the crucial proteins of Staphylococcus aureus. The docking results were found to be well correlated with the experimental data.

Exploring the interaction of phytochemicals from Hibiscus rosa-sinensis flowers with glucosidase and acetylcholinesterase: An integrated in vitro and in silico approach.

Targeting multiple factors such as oxidative stress, alpha glucosidase and acetylcholinesterase (AChE) are considered advantageous for the treatment of diabetes and diabetes associated-cognitive dysfunction. In the present study, Hibiscus rosa-sinensis flowers anthocyanin-rich extract (HRA) was prepared. Phytochemical analysis of HRA using LC-ESI/MS/MS revealed the presence of various phenolic acids, flavonoids and anthocyanins. HRA showed in vitro antioxidant activity at low concentrations. HRA inhibited all the activities of mammalian glucosidases and AChE activity. The IC50 value of HRA for the inhibition of maltase, sucrase, isomaltase, glucoamylase and AChE was found to be 308.02 ± 34.25 µg/ml, 287.8 ± 19.49 µg/ml, 424.58 ± 34.75 µg/ml, 408.94 ± 64.82 µg/ml and 264.13 ± 30.84 µg/ml, respectively. Kinetic analysis revealed mixed-type inhibition against all the activities except for glucoamylase (competitive) activity. In silico analysis confirmed the interaction of two active constituents cyanidin 3-sophoroside (CS) and quercetin 3-O-sophoroside (QS) with four subunits, n-terminal and c-terminal subunits of human maltase-glucoamylase and sucrase-isomaltase as well as with AChE. Molecular dynamics simulation, binding free energy calculation, DCCM, PCA, PCA-based free energy surface analysis ascertained the stable binding of CS and QS with target proteins studied. HRA could be used as complementary therapy for diabetes and cognitive improvement.

Application of Response Surface Methodology (RSM) in the statistical evaluation of biodiesel production from the neutral lipids of the Coelastrella-Nannochloropsis consortium.

The paramount challenge in economically workable microalgal biodiesel production is the selection of a competent catalyst to improve the fatty acid methyl ester yield with desirable fatty acid composition. Though countless researchers have explored different homogeneous and heterogeneous catalysts to improve the transesterification efficacy, achieving greater biodiesel production from the neutral lipids of the microalgal consortium using a statistical tool, response surface methodology is scarce. Thus, the present study applied Response surface methodology to statistically analyze the biodiesel production from the neutral lipids of the indigenous Coelastrella-Nannochloropsis consortium (CNC) on the way to commercial feasibility. Onset of the study, the neutral lipids and acid value of the CNC were determined to be 18.74% and 2.73%, respectively. The transesterification of the neutral lipids of CNC was optimized through the coded factors in the RSM for various reaction parameters as combined influence viz., (i) Catalyst dose: methanol volume, (ii) Catalyst dose: reaction time; (iii) Catalyst dose: reaction temperature, (iv) Time: temperature, (v) time: methanol volume, (vi) temperature: methanol volume. Based on the ANOVA, coefficient determination, 2% KOH, 2 h time, 70 °C temperature, and 9 mL methanol volume were ascertained to be optimal values to accomplish 92% biodiesel production. Further, the biodiesel has desirable palmitic, palmitoleic, stearic, oleic, linoleic, and linolenic acids, with palmitic acid as the prevalent fatty acid contributing 16-18%. In addition, the tested fuel properties of CNC biodiesel satisfy international biodiesel standards.

Biosynthesis cobalt-doped nickel nanoparticles and their toxicity against disease.

The nanostructures have the great potential for novel medical and drug delivery applications. In present paper a green approach for the preparation of pure nickel oxide (NiO) and 5% cobalt-doped NiO (Co╫NiO) nanoparticles (NPs) by using Prosopis fracta extract have been study. The product of Co╫NiO NPs was proved through the PXRD, Raman, UV-Vis, FESEM, and EDX analyses. The results of XRD, EDX, and UV-Visible spectra displayed well doped cobalt in NiO NP. The particle sizes of Co╫NiO NPs were observed to be about 80 nm. The MTT test results for the cytotoxicity of Co╫NiO NPs on breast cancer cells (MCF-7) affirmed the stronger impact of doped NiO-NPs on cancer cells compared to NiO NPs. Thus, it is indicated that the doping process on NiO NPs caused an increase in its inhibitory effect against MCF-7 cells. RESEARCH HIGHLIGHTS: Cobalt-doped NiO nanoparticles were prepared using ecofriendly synthesis method and their cytotoxicity studied against MCF-7 cells.

Improving Tannery Wastewater Treatments Using an Additional Microbial Treatment with a Bacterial-Fungal Consortium.

Environmental pollutants such as toxic heavy metals and oxygen-demanding solids are generated by leather manufacturing. In most tanneries, wastewaters are treated with physico-chemical methods but overly high levels of pollutants remain in surface waters. The efficiency of tanning wastewater treatment with conventional techniques was evaluated in four tanneries in Saudi Arabia. It was observed that the wastewaters contained high amounts of pollutants, needing further treatment. We isolated microorganisms from the wastewaters and carried out experiments to treat the effluents with different bacteria, fungi, and their consortia. We hypothesized that a consortium of microorganisms is more efficient than the single microorganisms in the consortium. The efficiency of five single bacterial and five fungal species from different genera was tested. In a consortium experiment, the efficiency of nine bacterial-fungal consortia was studied. The bacterium Corynebacterium glutamicum and the fungus Acremonium sp. were the most efficient in the single-microbe treatment. In the consortium treatment, the consortium of these two was the most efficient at treating the effluent. The factory wastewater treatment reduced total dissolved solids (TDS) from 1885 mg/L to 880 mg/L. C. glutamicum treatment reduced TDS to 150 mg/L and Acremonium sp. to 140 mg/L. The consortium of these two reduced TDS further to 80 mg/L. Moreover, the factory treatment reduced BOD from 943 mg/L to 440 mg/L, C. glutamicum to 75 mg/L, and Acremonium sp. 70 mg/L. The consortium reduced BOD further to 20 mg/L. The total heavy-metal concentration (Cd, Cr, Cu, Mn, and Pb) was reduced by the factory treatment from 43 µg/L to 26 µg/L and by the consortium to 0.2 µg/L. The collagen concentration that was studied using hydroxyproline assay decreased from 120 mg/L to 39 mg/L. It was shown that the consortium of the bacterium C. glutamicum and the fungus Acremonium sp. was more efficient in reducing the pollutants than the single species. The consortium reduced almost all parameters to below the environmental regulation limit for wastewater discharge to the environment in Saudi Arabia. The consortium should be studied further as an additional treatment to the existing conventional tannery wastewater treatments.

Taxonomic and molecular characterization of a new entomopathogenic nematode species, Heterorhabditis casmirica n. sp., and whole genome sequencing of its associated bacterial symbiont.

BACKGROUND: Nematodes of the genus Heterorhabditis are important biocontrol agents as they form a lethal combination with their symbiotic Photorhabdus bacteria against agricultural insect pests. This study describes a new species of Heterorhabditis. METHODS: Six Heterorhabditis nematode populations were recovered from agricultural soils in Jammu and Kashmir, India. An initial examination using mitochondrial and nuclear genes showed that they belong to a new species. To describe this new species, a variety of analyses were conducted, including reconstructing phylogenetic relationships based on multiple genes, characterizing the nematodes at the morphological and morphometric levels, performing self-crossing and cross-hybridization experiments, and isolating and characterizing their symbiotic bacteria. RESULTS: The newly discovered species, Heterorhabditis casmirica n. sp., shares 94% mitochondrial cytochrome C oxidase subunit I gene (COI) sequence identity with Heterorhabditis bacteriophora and Heterorhabditis ruandica, and 93% with Heterorhabditis zacatecana. Morphologically, it differs from H. bacteriophora in its infective juvenile phasmids (present vs. inconspicuous) and bacterial pouch visibility in the ventricular portion of the intestine (invisible vs. visible); genital papilla 1 (GP1) position (at manubrium level vs. more anterior), and in its b ratio (body length/neck length), c ratio (tail length/bulb width), and D% [(excretory pore/neck length) × 100]. Other morphological differences include anterior end to the nerve ring distance (77-100 vs. 121-130 µm), V% [(anterior end of vulva/body length) × 100] (46-57 vs. 41-47) in hermaphroditic females; rectum size (slightly longer than the anal body diameter vs. about three times longer), phasmids (smaller vs. inconspicuous), body length (0.13-2.0 vs. 0.32-0.39 mm), body diameter (73-150 vs. 160-220 µm), anterior end to the excretory pore distance (135-157 vs. 174-214 µm), and demanian ratios in amphimictic females. Morphological differences with H. ruandica and H. zacatecana were also observed. Furthermore, H. casmirica n. sp. did not mate or produce fertile progeny with other Heterorhabditis nematodes reported from India. It was also discovered that H. casmirica n. sp. is associated with Photorhabdus luminescence subsp. clarkei symbiotic bacteria. CONCLUSIONS: The discovery of H. casmirica n. sp. provides novel insights into the diversity and evolution of Heterorhabditis nematodes and their symbiotic bacteria. This new species adds to the catalog of entomopathogenic nematodes in India.

Bubble column photobioreactor (BCPR) for cultivating microalgae and microalgal consortium (Co-CC) with additional CO2 supply for enhancing biomass, lipid, and preferable fatty acids production.

The present study has designed and developed a 5 L bubble column photobioreactor (BCPR) to investigate two microalgal strains Chlorella sp. S-01, Chlorella sp. S-02 and their consortium Co-CC (Chlorella sp. S-01 + Chlorella sp. S-02) at 0.03, 5, and 10% CO2 supply for biomass and lipid production. The dry cell weight of Chlorella sp. S-01, Chlorella sp. S-02 and Co-CC were, respectively about 1.41, 1.32, and 1.39 g/L on the 20th day without CO2 supply, while it was 1.76, 1.61, and 1.87 g/L, respectively at 10% CO2 supply and similarly, chlorophyll-a content was higher in 10% CO2 supplied condition over control. Interestingly, Co-CC grown at all the CO2 concentrations showed similar lipid content between 19.30 and 1F9.41%. As an integrated refinery approach, de-oiled biomass of Co-CC was subjected to carbohydrates and protein estimation and found that 46.2% and 30.80% in 10% CO2 supply condition in BCPR. Lipid extracted from the Co-CC grown under 0.03, 5, and 10% CO2 supply in 5L BCPR was converted to biodiesel, and the biodiesel yield was estimated to be 62.78%. Further, the fatty acid profile of Co-CC grown at 10% CO2 showed higher levels of C16:0, C16:1, C18:1, and monounsaturated fatty acids contents over other CO2 supplied conditions. Biodiesel of Co-CC showed favourable fuel properties such as density, higher heating value, oxidative stability, CFPP, viscosity, degree of unsaturation, saponification value, and cetane number, which were also in accordance with ASTM, and EN, biodiesel standards.

Plant extract-mediated synthesis Cobalt doping in zinc oxide nanoparticles and their in vitro cytotoxicity and antibacterial performance.

In this research, zinc oxide (ZnO) nanoparticles doped with different percentages of produced cobalt using the green synthesis method. ZnO nanoparticles showed good cellular and microbial toxicity due to their high surface-to-volume ratio. Adding cobalt metal to the nanostructure can lead to the appearance of a new feature. To investigate the effect of adding cobalt metal, synthesized ZnO nanoparticles containing 3 and 6% cobalt were synthesized using plant extract. The resulting nanostructures were characterized by a Raman spectroscopy, UV-Visible spectrometer, X-ray diffraction, and Field emission scanning electron microscopy. Ultimately, the synthesized samples' cytotoxicity and antimicrobial tests were performed. XRD confirmed the formation of a hexagonal wurtzite ZnO structure. XRD and electron imaging showed that doping resulted in a decrease in average crystal size. The results showed that with cobalt doping, the particle size decreased slightly. The cytotoxicity and antimicrobial effects results showed that in all three studies, cobalt doping leads to an increase in the toxicity of this nanostructure compared to non-doped nanoparticles.