Synergistic Illusions: Enhancing Perceptual Effects of Pseudo-Attraction Force by Kinesthetic Illusory Hand Movement.

We investigated the enhancement of the perceived force strength in force feedback devices by combining the pulling illusion with kinesthetic illusions. The pulling illusion (i.e., a sensation of being pulled or pushed) is induced by asymmetric vibrations applied to the fingertips, enabling the implementation of small, lightweight, and ungrounded force feedback devices. However, the perceived force intensity is limited. We focused on the kinesthetic illusion, a phenomenon in which the movement of a limb in the direction of muscle extension is illusively perceived by presenting vibrations to tendons or muscles as an illusion that could enhance the perceived strength of the pulling illusion. Moreover, we investigated the perceptual characteristics of force sensation by combining a kinesthetic illusion induced by wrist tendon vibration stimulation with a pulling illusion. The findings demonstrate that the direction of the pulling illusion was accurately perceived, even with simultaneous wrist tendon vibration stimuli. Importantly, the results suggest that tendon vibration on the wrist, rather than cutaneous vibration on the wrist, enhances the perceived force intensity of the pulling illusion at the fingertips. These findings indicate the potential for expanding the expressive capability of the pulling illusion.

Deep learning improves performance of topological bending waveguides.

This study introduced design informatics using deep learning in a topological photonics system and applied it to a topological waveguide with a sharp bending structure to further reduce propagation loss. The sharp bend in the topological waveguide composed of two photonic crystals wherein dielectrics having C6v symmetry were arranged in triangle lattices of hexagons, and the designing of parameters individually for 6 × 6 unit cells near the bending region using deep learning resulted in an output improvement of 60% compared to the initial structure. The proposed structural design method has high versatility and applicability for various topological photonic structures.

Extended optical waveguide theory with magneto-optical effect and magnetoelectric effect.

Optical waveguide theory is essential to the development of various optical devices. Although there are reports on the theory of optical waveguides with magneto-optical (MO) and magnetoelectric (ME) effects, a comprehensive theoretical analysis of waveguides considering these two effects has not yet been published. In this study, the conventional waveguide theory is extended by considering constitutive relations that account for both MO and ME effects. Using the extended waveguide theory, the propagation properties are also analyzed in a medium where metamaterials and magnetic materials are arranged such that MO and ME effects can be controlled independently. It has been confirmed that the interaction between MO and ME effects occurs depending on the arrangement of certain metamaterials and the direction of magnetization. This suggests a nonreciprocal polarization control that rotates the polarization in only one direction when propagating in plane wave propagation and enhances the nonreciprocal nature of the propagating waves in waveguide propagation.

Demonstration of a highly efficient topological vertical coupler.

A defect structure is proposed for enhancing the coupling efficiency of vertically incident circularly polarized light in a topological waveguide. In the topological edge-state waveguide based on triangle lattices of hexagons consisting of six nanoholes respecting C6v symmetry in a silicon optical circuit, the vertical coupling rate is improved by removing the nanoholes from one hexagonal cell near the line. The coupling efficiency was evaluated with and without the defect structure. The introduced defect structure operates suitably for focused beams of left- and right-handed circularly polarized light, enhancing the optical communication wavelength bandwidth by up to 10 dB.

[The Potential of the Metaverse to Transform Education and Training].

The Metaverse, profoundly and closely related to VR technology, is attracting attention as a space where social activities can be realized online, and among its various applications, its use in education and training is highly anticipated. However, educational and training applications using the Metaverse should not serve as alternatives to the physical world but rather demonstrate their true value in things that can only be realized in VR or are first made possible in the Metaverse. This article discusses the Metaverse's potential and desired state through new educational and training initiatives enabled by it.

Topological photonic crystal fiber with honeycomb structure.

We analyze a new type of photonic crystal fiber which consists of the core and cladding that distinct in topology by tuning the position of air holes in each hexagonal unit cell where the C6v symmetry is respected. The p-d band inversion between the core and cladding leads to topological interface modes inside the band gap, which can propagate along the fiber with a nonzero momentum in perpendicular to the corss section of a fiber. The helical topological interface modes possess the pseudospin-momentum locking effect inherited from the corresonding two-dimensional photonic crystal characterized by the Z2 topology. The wave functions for the topological interface modes are analytically studied and compared successfully to the numerical results, enlighting a novel way to use photonic crystal fiber to transfer information.

Effects of bone-conducted vibration stimulation of various frequencies on the vertical vection.

Illusory self-motion ("vection") has been used to present a sense of movement in virtual reality (VR) and other similar applications. It is crucial in vection research to present a stronger sense of movement. Bone-conducted vibration (BCV) is a small and generally acceptable method for enhancing the sense of movement in VR. However, its effects on vection have not been extensively studied. Here, we conducted two experiments to investigate the effect of BCV on the vection, which generates an upward sensation under the hypothesis that BCV stimulation to the mastoid processes causes noise in the vestibular system and enhances visually-induced self-motion perception. The experiments focused on the effects of BCV stimuli of different frequencies on the vection experience. The results suggested that 500 Hz BCV was more effective as noise to the vestibular system than other frequency BCVs and improved self-motion sensation. This study examines the effects of BCV with different frequencies on the vection experience and designs a theory for using BCV in VR.

Leveraging Tendon Vibration to Enhance Pseudo-Haptic Perceptions in VR.

Pseudo-haptic techniques are used to modify haptic perception by appropriately changing visual feedback to body movements. Based on the knowledge that tendon vibration can affect our somatosensory perception, this paper proposes a method for leveraging tendon vibration to enhance pseudo-haptics during free arm motion. Three experiments were performed to examine the impact of tendon vibration on the range and resolution of pseudo-haptics. The first experiment investigated the effect of tendon vibration on the detection threshold of the discrepancy between visual and physical motion. The results indicated that vibrations applied to the inner tendons of the wrist and elbow increased the threshold, suggesting that tendon vibration can augment the applicable visual motion gain by approximately 13% without users detecting the visual/physical discrepancy. Furthermore, the results demonstrate that tendon vibration acts as noise on haptic motion cues. The second experiment assessed the impact of tendon vibration on the resolution of pseudo-haptics by determining the just noticeable difference in pseudo-weight perception. The results suggested that the tendon vibration does not largely compromise the resolution of pseudo-haptics. The third experiment evaluated the equivalence between the weight perception triggered by tendon vibration and that by visual motion gain, that is, the point of subjective equality. The results revealed that vibration amplifies the weight perception and its effect was equivalent to that obtained using a gain of 0.64 without vibration, implying that the tendon vibration also functions as an additional haptic cue. Our results provide design guidelines and future work for enhancing pseudo-haptics with tendon vibration.

High-temperature and high-efficiency operation of a membrane optical link with a buried-ridge-waveguide bonded on a Si substrate.

We demonstrate a membrane photonic integrated circuit (MPIC) that includes a membrane distributed feedback (DFB) laser and a p-i-n photodiode with a buried-ridge-waveguide (BRW) on a Si substrate, using a-Si nanofilm-assisted room-temperature surface activated bonding (SAB) for on-chip optical interconnection. The BRW structure enhanced the lateral optical confinement compared with that of the conventional flat structure. The directly bonded membrane DFB laser using SAB had a lower thermal resistance and higher output power than the previous structure using a benzocyclobutene (BCB) bonding layer. The DFB laser had a low threshold current of 0.27 mA at 25 °C. The maximum detected photocurrent and slope efficiency were 0.95 mA and 0.203 mA/mA, respectively, at 25 °C. The MPIC was successfully operated at temperatures up to 120 °C. The 3-dB bandwidths of 16.8 GHz and 10.1 GHz were achieved at 25 °C and 80 °C, respectively, and 25 Gbps and 15 Gbps non-return-to-zero (NRZ) 215-1 pseudo-random bit sequence signals were recorded at 25 °C and 80 °C, respectively.

High-speed infrared photonic band microscope using hyperspectral Fourier image spectroscopy.

In this study, we developed a photonic band microscope based on hyperspectral Fourier image spectroscopy. The developed device constructs an infrared photonic band structure from Fourier images for various wavelength obtained by hyperspectral imaging, which make it possible to speedily measure the dispersion characteristics of photonic nanostructures. By applying the developed device to typical photonic crystals and topological photonic crystals, we succeeded in obtaining band structures in good agreement with the theoretical prediction calculated by the finite element method. This device facilitates the evaluation of physical properties in various photonic nanostructures, and is expected to further promote related fields.

Influence of hand-arm self-avatar motion delay on the directional perception induced by an illusory sensation of being twisted.

Sensory information from movements of body parts can alter their position when exposed to external physical stimuli. Visual information monitors the position and movement of body parts from an exterior perspective, whereas somatosensory information monitors them from an internal viewpoint. However, how such sensory data are integrated is unclear. In this study, a virtual reality (VR) system was used to evaluate the influence of the temporal difference between visual and somatosensory information from hand movements on the directional perception of a torque while modifying the visual appearance (human hand vs. non-human object) and visuohaptic congruency (congruent vs. incongruent) of self-avatars. Visual information was provided by the movement of the self-avatars in a VR environment, while somatosensory information was provided by vibrations with asymmetrical amplitudes that gave the participants the sensation of being continuously pushed or pulled without actually moving any body part. Delaying the movement of the avatar by 50 ms resulted in the sensitivity of the force direction perception to be lower with human hands than with non-human avatars, whereas a delay of 200 ms resulted in a higher sensitivity. This study can contribute to applications requiring multisensory integration in a VR environment.

Selective excitation of optical vortex modes with specific charge numbers in band-tuned topological waveguides.

We propose a method for selectively propagating optical vortex modes with specific charge numbers in a photonic integrated circuit (PIC) by using a topological photonic system. Specifically, by performing appropriate band tuning in two photonic structures that comprise a topological waveguide, one specific electromagnetic mode at the Γ point of a band diagram can be excited. Based on theoretical analysis, we successfully propagated optical vortex modes with specific charge numbers over a wide range in the C band in the proposed topological waveguide. The proposed method could be useful in controlling optical vortex signals at the chip level in future orbital angular momentum multiplexing technologies.

Optical ReLU using membrane lasers for an all-optical neural network.

In this study, we propose low power consumption, programmable on-chip optical nonlinear units (ONUs) for all-optical neural networks (all-ONNs). The proposed units were constructed using a III-V semiconductor membrane laser, and the nonlinearity of the laser was used as the activation function of a rectified linear unit (ReLU). By measuring the relationship of the output power and input light, we succeeded in obtaining the response as an activation function of the ReLU with low power consumption. With its low-power operation and high compatibility with silicon photonics, we believe that this is a very promising device for realizing the ReLU function in optical circuits.

Highly efficient vertical coupling to a topological waveguide with defect structure.

In this study, we propose a defect structure that enhances the vertical coupling efficiency of circularly polarized light incident on topological waveguides consisting of triangle nanoholes with C6v symmetry arranged in honeycomb lattice. The defect structure was formed by removing triangle nanoholes from a certain hexagonal unit cell around the topological waveguide. As a result of comparing the coupling efficiency with and without the defect structure through three-dimensional finite-difference time-domain analysis, significant improvement in the vertical coupling efficiency was observed over the entire telecom C band (4460%@1530 nm). In addition, it was also found that the wavelength showing maximum coupling efficiency can be controlled over the entire C band by changing the arrangement of the dielectric around the defect structure.

Topological converter for high-efficiency coupling between Si wire waveguide and topological waveguide.

Replacing part of a conventional optical circuit with a topological photonic system allows for various controls of optical vortices in the optical circuit. As an underlying technology for this, in this study, we have realized a topological converter that provides high coupling efficiency between a normal silicon wire waveguide and a topological edge waveguide. After expanding the waveguide width while maintaining single-mode transmission from the Si wire waveguide, the waveguides are gradually narrowed from both sides by using a structure in which nanoholes with C6 symmetry are arranged in a honeycomb lattice. On the basis of the analysis using the three-dimensional finite-difference time-domain method, we actually fabricated a device in which a Si wire waveguide and a topological edge waveguide were connected via the proposed topological converter and evaluated its transmission characteristics. The resulting coupling efficiency between the Si wire waveguide and the topological edge waveguide through the converter was -4.49 dB/taper, and the coupling efficiency was improved by 5.12 dB/taper compared to the case where the Si wire waveguide and the topological edge waveguide were connected directly.

Control of slow-light effect in a metamaterial-loaded Si waveguide.

A metamaterial is an artificial material designed to control the electric permittivity and magnetic permeability freely beyond naturally existing values. A promising application is a slow-light device realized using a combination of optical waveguides and metamaterials. This paper proposes a method to dynamically control the slow-light effect in a metamaterial-loaded Si waveguide. In this method, the slow-light effect (i.e., group index) is controlled by changing the phase of the control light incident on the device from a direction opposite to that of the signal light. The group index of the device could be continuously controlled from 63.6 to 4.2 at a wavelength of 1.55 µm.

Pseudo-Sensation of Walking Generated by Passive Whole-Body Motions in Heave and Yaw Directions.

Walking is an innate human behavior that propels the body forward. Recent studies have investigated the creation of a walking sensation wherein, the body neither moves nor is forced to move. However, it is unclear which whole-body motions effectively induce the sensation of walking. Here, we show that passive whole-body motions, such as heave and/or yaw motions, produced by a motorized chair induced a sensation of walking for seated participants in virtual environments as if the participant were walking while viewing a virtual reality scene through a head-mounted display. Our findings suggest that the passive whole-body motions in the gravitational axis-and to a lesser extent in the yaw axis-provide a clear perception of pseudo-walking, but only with limited motion amplitudes, namely one-fourth or less than those of actual walking. In addition, we found a negative correlation between the scores of walking sensation and motion sickness.

Metamaterial infrared refractometer for determining broadband complex refractive index.

Infrared refractive index is an indispensable parameter for various fields including infrared photonics. To date, critical-angle refractometers, V-block refractometers, and spectroscopic ellipsometry have been commonly used to measure the refractive index. Although every method has an accuracy of four decimal places for the refractive index, a measurable wavelength region is limited up to about 2 µm. In this study, we demonstrated a metamaterial infrared refractometer for determining broadband complex refractive index. Using the device, a broadband (40-120 THz; wavelength 2.5-7.5 µm) and high-precision(< 5 ×10-3) complex refractive index of polymethyl methacrylate was measured for the first time.

Virtual Walking Sensation by Prerecorded Oscillating Optic Flow and Synchronous Foot Vibration.

This article reports the first psychological evidence that the combination of oscillating optic flow and synchronous foot vibration evokes a walking sensation. In this study, we first captured a walker's first-person-view scenes with footstep timings. Participants observed the naturally oscillating scenes on a head-mounted display with vibrations on their feet and rated walking-related sensations using a Visual Analogue Scale. They perceived stronger sensations of self-motion, walking, leg action, and telepresence from the oscillating visual flow with foot vibrations than with randomized-timing vibrations or without vibrations. The artificial delay of foot vibrations with respect to the scenes diminished the walking-related sensations. These results suggest that the oscillating visual scenes and synchronous foot vibrations are effective for creating virtual walking sensations.