Sustainable appraisal of lac (Kerria Lacca) based anthraquinone natural dye for chemical and bio-mordanted viscose and silk dyeing.

The coloring behavior of laccaic acid, a natural red dye derived from lac insects, has been investigated in this work for the dyeing of silk and viscose fabrics while being heated in MW radiation. The extract was made in an aqueous and acidic media and then used to color fabrics under microwave treatment for up to 10 min. For developing new shades, eco-friendly green bio-mordants and, in comparison, chemical mordants were employed at given conditions. The obtained results revealed that the aqueous extract after 4 min of radiation exposure produced a high color strength (K/S = 17.132) onto silk and the aqueous extract after 6 min of radiation exposure produced better color strength (K/S = 6.542) onto viscose at selected conditions. The fastness ratings evaluation as per ISO standards demonstrates that bio-anchors have provided good ratings under selected irradiation and dyeing conditions. It is concluded that this environmentally friendly technique has improved the natural coloration process of fabrics as well as addition of green mordants has furnished colorfast shades using lac-derived natural anthraquinone dye.

Environmental friendly utilization of plant wastes in combination as a source of natural colorants for binary mordanted silk dyeing.

This study investigates the absorption behavior of natural dyes on silk fabric: madder roots (red dye) and amaltas (brown dye). The dyes were extracted under optimized conditions in an acidic medium. Binary mixtures of these dyes in different proportions were employed to develop various shades. This research work has explored the impact of single as well as binary mixture of chemical mordants on the dyeing behavior of natural dyes on silk. Al (Alum), iron (Fe), and tannic acid (T.A.) were used as pre- and post-mordants. Different concentrations of the dye mixtures were used to achieve different shades. The absorption behavior of the binary mixture of natural dyes was assessed using a spectra photometer Colori-spectra SF600. The study found that the highest color strength was achieved when an acidic extract with a table salt concentration of 2 g/100 mL was applied to silk fabric at 65 °C for 55 min and subjected to microwave treatment for 6 min. The study revealed excellent results for the selected binary mixtures of chemical mordants, such as (Al + Fe), (Al + T.A.), and (Fe + T.A.), in comparison by employing single mordants such as (Al, Fe, and T.A.).

Alkanna tinctoria-based sustainable alkanin natural colorant for eco-dyeing of wool.

The awareness of sustainability and widespread utilization of green technologies in textile dye houses are revolutionizing not only textile industries but related fields. The current study is concerned with ultrasonic (US)-assisted utilization of extracts of Alkanna tinctoria (a source of natural alkanin dye) for wool dyeing. The extracts are obtained in various media, and both extracts and wool fabrics have been  US treated for 15-60 min. Dyeing is performed by applying variable parameters and utilizing herbal-based extracts as a source of bio-mordant, hence improving the fastness rating and enhancing color strength. Good color strength and fastness ratings are obtained using irradiated extract at 4 pH when the US-treated wool fabric is dyed at 65 °C for 60 min before and after chemical and bio-mordanting. For comparative studies, chemical mordants are also employed. In contrast to chemical mordants, the bio-mordants have made the dyeing process more sustainable with good to excellent fastness rating.

Environmental-friendly extraction of Peepal (Ficus Religiosa) bark-based reddish brown tannin natural dye for silk coloration.

The present study aims to extract a natural reddish brown colorant from Peepal (Ficus religiosa) for silk dyeing using the microwave radiation process (MW). The colorant was isolated in aqueous and acidic media, and MW treatment for 1, 2, 3, 4, and 5 min has been given to both fabric and extract to observe changes in color intensity. The dye variables have been optimized, and for sustainable shade making process with good fastness, 1.0-5.0 g/100 mL of sustainable chemical and bio-mordants has been employed. It has been found that after microwave treatment for 3 min, under selected conditions, the irradiated aqueous extract has given high color intensity onto silk fabric. The utilization of 3% of Al, 4% of Fe, and 2% of tannic acid (T.A.) as pre chemical mordant whereas 4% of Al, 4% of Fe, and 3% of tannic acid as post chemical mordant have given good color characteristics. In comparison, 4% of acacia and 3% of turmeric and pomegranate while 3% of acacia and turmeric and 4% of pomegranate extracts as post-bio-mordant have given excellent color characteristics. It is concluded that MW treatment has an excellent sustainable efficacy to isolate colorant from Peepal bark for silk dyeing, whereas the inclusion of bio-mordants has not only made the process more sustainable and environmental friendly but also best K/S, and L*a*b* values have been acquired.

Sustainable isolation of licorice (Glycyrrhiza glabra L.)-based yellow natural colorant for dyeing of bio-mordanted cotton.

Sustainability in the utilization of products in all fields particularly food textiles, solar cells, etc. is of prime concern to the global community. In this study, licorice (Glycyrrhiza glabra L.) as a source of herbal-based coloring agent for cotton dyeing has been explored under the influence of ultrasonic (US) waves. Methanolic extract of licorice bark after US treatment for 20 min has shown excellent color depth (K/S) onto ultrasonically treated cotton fabric at 65°Cfor 45 min. Applying bio-mordants, it has been found that acacia extract (1%), henna (5%), and pomegranate and turmeric extracts (7%) as pre-bio-mordant, whereas acacia, turmeric, and henna extracts (7%) and pomegranate extract (5%) as post-bio-mordants, exhibited superb color strength. Salts of Al (7%) and salts of Fe (3%) as pre chemical mordants, while salts of Al (3%) and salts of Fe (5%) as post chemical mordants, have given good results. Overall, it has been found that salt of Fe (3%) as pre-chemical mordant and extract of turmeric (7%) as post bio-mordant have shown superb color strength. It can be concluded that US treatment being an environmentally safe means has only improved the color strength of colorant onto cotton fabric and the adding of bio-mordants has contrived the method more sustainable.

Eco-friendly approach towards isolation of colorant from Esfand for bio-mordanted silk dyeing.

Sustainability in all applied fields particularly in textiles is to protect our globe, environment, and community, where green dyed products are playing their role. For the current study, Esfand (Peganum harmala) has been explored using a green isolation tool, i.e., ultrasonic (U.S.) rays, and applied onto fabric. Different dyeing parameters have been explored statistically through response surface methodology by employing temperature (50-80°C), time (25-65 min), extract volume (15-55 mL), salt (1-5 g/100 mL), and dye bath pH (4-7) through series of experiments. For developing new shades, green mordants such as elaichi, neem, turmeric, and zeera have been utilized. It has been found that exposure of 35 mL extract of 7 pH containing 3 g/100 mL of salt as exhausting agent to U.S. rays for 30 min for the dyeing of silk at 70°C for 45 min has given maximum color strength with reddish-yellow shades. Color characteristics obtained in the CIE Lab system reveal that 5% of turmeric as meta bio-mordant has given good quality reddish-yellow shades. It is found that U.S. rays have not only good potential to isolate colorant followed by dyeing of silk under reduced condition but also the application of bio-mordants have made the process more greener, sustainable, and cleaner.

Sustainable application of Cassia obovata-based chrysophanic acid as potential source of yellow natural colorant for textile dyeing.

In the current pandemic scenario, sustainable green products particularly antiviral, antioxidant, and antibacterial in nature are gaining worldwide fame in almost every walk of life. Cassia obovata (C. obovata) has been valorized as a source of yellow natural dye for nylon dyeing. For the isolation of dye extracts and for surface tuning, nylon fabrics were treated with microwave rays up to 10 min. For getting new shades with good to excellent fastness characteristics, sustainable bio-mordants in comparison with chemical mordants have been used at 60 °C, 70 °C, and 80°C. It has been found that for getting effective colorant yield, acidic extract should be exposed to MW ray treatment up to 6 min, and for getting improved fastness rating, bio-mordants have given excellent color characteristics. Statistical optimization of dyeing variable shows that application of 40 mL of C. obovata acidic extract of RE of 6 pH containing 3 g/100 mL of salt when employed at 55 °C for 45 min has given excellent results onto irradiated nylon fabric (RNF). It is inferred that Cassia obovata has an excellent potential for coloration of surface-modified fabrics, where the application of low amount of bio-mordants under statistical optimized conditions has made process more ecological, economical, and sustainable.

Waste black tea leaves (Camelia sinensis) as a sustainable source of tannin natural colorant for bio-treated silk dyeing.

Environmentally friendly products are the need of the hour, particularly in this pandemic situation because synthetic products need such toxic chemicals for their formulation and finishing which are carcinogenic for the globe. The current study is the utilization of waste black tea leaf (BT)-based tannin brown natural colorant for silk dyeing using microwave treatment. Dye (tannin) has been isolated in various media before and after microwave treatment up to 6 min and applied at various conditions. It has been found that 30 mL of aqueous extract of 3.0 pH obtained from 6.0 g of powder containing 3.0 g/100 mL of salt as an exhausting agent after microwave treatment for 5 min, when employed at 55 °C for 45 min, has given good color yield onto silk. Iron (3%) and acacia extract (2%) as pre-chemical and bio mordant, iron (2%) and pomegranate extract (2%) as post chemical and bio-mordant, and Al (3 %) and pomegranate extract (3%) as meta chemical and bio-mordant have given new shades with good to excellent fastness ratings. It is inferred that waste black tea leaves (BTs) in an aqueous medium have an excellent potential to serve as a source of natural tannin brown dye for the coloration of surface-modified silk fabrics under the influence of cost, energy, and time-effective microwave treatment. Additionally, the utilization of a low amount of sustainable chemical and bio-mordants has valorized the dyeing of silk by developing soothing and sustainable shades with good fastness properties.

Environmental friendly sustainable application of plant-based mordants for cotton dyeing using Arjun bark-based natural colorant.

Ecofriendly exploration of Arjun bark (Terminalia arjuna) is a herbal natural colorant for cotton dyeing. This is because the demand for natural dyes has been increased worldwide due to their therapeutic usage and other food, textiles, agriculture, engineering, and medical applications. Therefore, this study has been carried out due to the isolation of colorant from Arjun bark in an acidified methanolic medium after exposure to ultrasonic rays up to 60 min. Additionally, using bio-mordants, it has been found that the application of 10% of Zeera (Cuminum cyminum) extract as meta-bio-mordant, 3% of Ilaichi (Elettaria cardamomum) extract as meta-bio-mordant, and10 % of Harmal (Peganum harmala) and Neem (Azadirachta indica) extract as meta-bio-mordants has given excellent color strength. These bio-mordants have not only made the coloration process more eco-friendly, viable, and greener, but also improved color strength with various tonal effects from red to reddish brown shades. Thus, it has been found that ultrasonic treatment as an environment-friendly tool has not only enhanced the color strength of natural colorant isolated from Arjun bark onto the cotton fabric under mild conditions.

Sustainable application of cochineal-based anthraquinone dye for the coloration of bio-mordanted silk fabric.

Natural colors particularly animal-based colorants are employed in the field of cosmetics, food, and flavors and also gaining popularity in textiles, due to their soothing nature. In this study, the microwave-assisted extraction of colorant from cochineal insects for dyeing of bio-mordanted silk has been carried out. Acidic, methanolic, and acidified methanol solubilized media were used to extract the natural colorant from cochineal under microwave irradiation for 1-6 min. Bio-mordants have been employed at optimized conditions to make the process greener and sustainable. It is found that acid solubilized extract of pH 4, employed at 55 °C for 55 min containing 5 g/100 mL of Glauber's salt as exhausting agent has given high color strength onto microwave-treated silk fabric. Suggested ISO standards for colorfastness have revealed that bio-mordants have given excellent color depth and excellent rating of fastness properties, compared with chemical mordants used. It is found that microwave treatment has not only improved the dyeing behavior of colorant extracted from cochineal in acid solubilized medium but also enhanced the color characteristics onto bio-mordanted silk fabric.