Experiment on Compressive Properties and Microscopic Analysis of Sea Sand Geopolymer-Based Recycled Concrete.

For marine and coastal engineering, construction resources have become scarce due to a limited local supply. Sea sand geopolymer-based recycled concrete (SSGRC) is an innovative cementitious material known for its eco-friendly benefits and corrosion resistance. This study explores the mechanical properties of SSGRC. The influences of the replacement rate of mineral slag, alkali activator concentrations, fine aggregate types, and curing ages on the compression strength of SSGRC were studied. The failure mechanism was analyzed using the failure patterns and compressive stress-strain curves. The results show that sea sand had a positive effect on geopolymer-based material. The SSGRC reached peak strength with an alkali activator concentration of 10 mol/L and a mineral slag replacement rate of 60%. The maximum stress and strain increased with an increasing curing age. The ratios of strength to the peak value were 55% and 85% after 1 day and 7 days, respectively. Using SEM, in the last hydration stage, the C-(A)-S-H gel was formed with a dense microstructure, and the geopolymer exhibited a favorable bonding performance. The constitutive models describing the complete stress-strain relationship under compression were developed.

Distribution, partition and removal of polycyclic aromatic hydrocarbons (PAHs) during coking wastewater treatment processes.

In this study, we report the performance of a full-scale conventional activated sludge (A-O1-O2) treatment in eliminating polycyclic aromatic hydrocarbons (PAHs). Both aqueous and solid phases along with the coking wastewater treatment processes were analyzed for the presence of 18 PAHs. It was found that the target compounds occurred widely in raw coking wastewater, treated effluent and sludge samples. In the coking wastewater treatment system, 4-5 ring PAHs were the dominant compounds, while 4 rings PAHs predominated in the sludge samples. Over 98% of the PAH removal was achieved in the coking wastewater treatment plant (WWTP), with the total concentration of PAHs being 21.3 ± 1.9 µg L(-1) in the final effluent. During the coking wastewater treatment processes, the association of the lower molecular weight PAH with suspended solids was generally less than 60%, while the association of higher molecular weight PAHs was greater than 90%. High distribution efficiencies (Kdp and Kds) were found, suggesting that adsorption was the potential removal pathway of PAHs. Finally, the mass balances of PAHs in various stages of the coking WWTP were obtained, and the results indicated that adsorption to sludge was the main removal pathway for PAHs in the coking wastewater treatment processes.