Comparison with surgically resected mucinous cystic neoplasm of pancreas and branch-duct type intraductal papillary mucinous neoplasm considering clinico-radiological high-risk features: a reassessment of current guidelines.

PURPOSE: To perform a comparative analysis of surgically resected mucinous cystic neoplasm (MCN) of pancreas and branch-duct type intraductal papillary mucinous neoplasms (BD-IPMN) considering clinico-radiological high-risk predictors for malignant tumors using the current management guidelines. MATERIALS AND METHODS: 224 patients who underwent surgical resection and had histopathologically confirmed MCNs (benign 73; malignant 17) or BD-IPMNs (benign 110; malignant 24) and had pre-operative CT or MRI were retrospectively reviewed. Tumors classified as either high-grade dysplasia or invasive carcinoma were considered malignant, whereas those with low-grade dysplasia were considered benign. Imaging features were analyzed by two radiologists based on selected high-risk stigmata or worrisome features proposed by prevalent guidelines except tumors with main pancreatic duct dilatation (> 5 mm) were excluded. RESULTS: MCNs and BD-IPMNs showed significant differences in aspects like tumor size, location, the presence and size of enhancing mural nodules, the presence of wall or septal thickening, and multiplicity. Multivariate analyses revealed tumor size (OR, 1.336; 95% CI, 1.124-1.660, p = 0.002) and the presence of enhancing mural nodules (OR, 67.383; 95% CI, 4.490-1011.299, p = 0.002) as significant predictors of malignant MCNs. The optimal tumor size differentiating benign from malignant tumor was 8.95 cm, with a 70.6% sensitivity, 89% specificity, PPV of 27.6%, and NPV of 96.9%, demonstrating superior specificity than the guideline-suggested threshold of 4.0 cm. For malignant BD-IPMNs, the presence of enhancing mural nodules (OR, 15.804; 95% CI, 4.439-56.274, p < 0.001) and CA 19 - 9 elevation (OR, 19.089; 95%CI, 2.868-127.068, p = 0.002) as malignant predictors, with a size of enhancing mural nodule threshold of 5.5 mm providing the best malignancy differentiation. CONCLUSION: While current guidelines may be appropriate for managing BD-IPMNs, our results showed a notably larger optimal threshold size for malignant MCNs than that suggested by current guidelines. This warrants reconsidering existing guideline thresholds for initial risk stratification and management of MCNs.

Characterizations of Bone-Like Apatite Powder Fabricated Using Modified Simulated Body Fluid.

The objective of this study is to fabricate bone-like apatite (BLAp) powder using the modified simulated body fluid (SBF). The SBF2X and SBF4X groups were prepared by increasing the concentration of inorganic ions by two and four times, respectively, to that of the standard SBF. The mSBF4X group was prepared by particularly increasing the concentrations of calcium and phosphate ions in SBF. Bovine serum albumin (BSA) was added for SBF2X-BSA, SBF4X-BSA, and mSBF4X-BSA groups. BLAp powders were precipitated in these SBFs while being kept at 60 °C. Micro-morphology of BLAp powders showed tens of micrometers-sized rounded clusters which composed with sheet-like nano crystallites. The radius of BLAp clusters were decreased by increasing the concentration of inorganic ions and by incorporating the BSA. The hydroxyapatite crystalline structure was dominant for all sample groups. Further, octacalcium phosphate structure was detected in the mSBF4X group. However, these peaks were decreased in mSBF4X-BSA. FT-IR spectra demonstrated that BSA was co-precipitated in BLAp crystallites, and the amount of BSA was higher in the mSBF4X-BSA group than in the SBF4X-BSA group.

Osteoblast cell adhesion and viability on nanostructured surfaces of porous titanium oxide layer.

Surface characteristics and osteoblast cell functions were investigated for the nano-structured oxide layer on commercially pure titanium (CP-Ti) fabricated using microarc oxidation (MAO) and hydrothermal treatment (HT) methods. Ti-MAO-135HT, Ti-MAO-150HT, and Ti-MAO-175HT groups were fabricated by hydrothermally treating the MAO-treated specimens (Ti-MAO) in phosphorus-containing alkaline solution at temperatures of 135, 150, or 175 °C, respectively. After hydrothermal treatment, a nanosheet-shaped morphology, nano-needles and nanorods were observed on the porous surface of the Ti-MAO-135HT, Ti-MAO-150HT and Ti-MAO-175HT groups, respectively. The roughness was not significantly different for all groups. However the contact angle decreased dramatically as the hydrothermal temperature increased. The osteoblastic cell adhesion and viability of the Ti-MAO-150HT and Ti-MAO-175HT groups were significantly lower compared to those of the Ti-MAO group. This study showed that nano-topology formed on micro porous oxide layer was more important than hydrophilicity in its effect upon initial osteoblastic cell functions.

Cytocompatibility of pure metals and experimental binary titanium alloys for implant materials.

OBJECTIVE: This study was performed to evaluate the biocompatibility of nine types of pure metal ingots (Ag, Al, Cr, Cu, Mn, Mo, Nb, V, Zr) and 36 experimental titanium (Ti) alloys containing 5, 10, 15, and 20 wt% of each alloying element. METHODS: The cell viabilities for each test group were compared with that of CP-Ti using the WST-1 test and agar overlay test. RESULTS: The ranking of pure metal cytotoxicity from most potent to least potent was as follows: Cu>Al>Ag>V>Mn>Cr>Zr>Nb>Mo>CP-Ti. The mean cell viabilities for pure Cu, Al, Ag, V, and Mn were 21.6%, 25.3%, 31.7%, 31.7%, and 32.7%, respectively, which were significantly lower than that for the control group (p<0.05). The mean cell viabilities for pure Zr and Cr were 74.1% and 60.6%, respectively (p<0.05). Pure Mo and Nb demonstrated good biocompatibility with mean cell viabilities of 93.3% and 93.0%, respectively. The mean cell viabilities for all the Ti-based alloy groups were higher than 80% except for Ti-20 Nb (79.6%) and Ti-10 V (66.9%). The Ti-10 Nb alloy exhibited the highest cell viability (124.8%), which was higher than that of CP-Ti. Based on agar overlay test, pure Ag, Cr, Cu, Mn, and V were ranked as 'moderately cytotoxic', whereas the rest of the tested pure metals and all Ti alloys, except Ti-10 V (mild cytotoxicity), were ranked as 'noncytotoxic'. SIGNIFICANCE: The results obtained in this study can serve as a guide for the development of new Ti-based alloy implant systems.

Effect of laser irradiation on crystalline structure of enamel surface during whitening treatment with hydrogen peroxide.

OBJECTIVE: This study is to evaluate the effect of laser activation on the whitening and crystalline structure of enamel surface during whitening treatment with hydrogen peroxide. METHODS: Bovine teeth were treated with whitening gel containing 35% hydrogen peroxide. A whitening gel was applied on the enamel surface for a period of 5 min, and then irradiated using a diode laser (740 nm) during whitening treatment for 0, 30, 60, 120 and 180s for the GL0-W, GL30-W, GL60-W, GL120-W and GL180-W groups, respectively. The total whitening application time was 30 min for all groups. RESULTS: Laser-irradiated enamel groups showed a similar lightness compared to the GL0-W group. The thickness of porous layer observed on the enamel surface of GL0-W group was decreased by increasing the laser irradiation time. While the Ca and P contents of the GL0-W group were lower than those of the non-whitening treated group (GL0-C), the Ca and P contents of the GL180-W group were similar to those of the GL180-C group. The enamel crystallinity was dramatically decreased by whitening treatment without laser irradiation. However, the decrease of crystallinity was protected by laser irradiation during whitening treatment. Raman measurement verified that laser irradiation could prevent the loss of mineral compositions on enamel and maintain its crystalline structure. SIGNIFICANCE: The professional whitening treatment with hydrogen peroxide and diode laser activation improves not only the whitening effect but also protects the change of enamel structure compared to the treatment with only gel.