Zinc and sulfur functionalized biochar as a peroxydisulfate activator via deferred ultraviolet irradiation for tetracycline removal.

To enhance the degradation of tetracycline class (TC) residuals of high-concentration from pharmaceutical wastewater, a novel zinc (Zn) and sulfur (S) functionalized biochar (SC-Zn), as a peroxydisulfate (PDS) activator, was prepared by two-step pyrolysis using ZnSO4 accumulated water-hyacinth. Results showed that the removal rate of 50, 150, and 250 mg per L TC reached 100%, 99.22% and 94.83% respectively, by the SC-Zn/PDS system at a dosage of 0.3 g per L SC-Zn and 1.2 mM PDS, via the deferred ultraviolet (UV) irradiation design. Such excellent performance for TC removal was due to the synergetic activation of PDS by the biochar activator and UV-irradiation with biochar as a responsive photocatalyst. The functionalization of the co-doped Zn and S endowed the biochar SC-Zn with a significantly enhanced catalytic performance, since Zn was inferred to be the dominant catalytic site for SO4˙- generation, while S played a key role in the synergism with Zn by acting as the primary adsorption site for the reaction substrates. The employed SC-Zn/PDS/UV system had excellent anti-interference under different environmental backgrounds, and compared with the removal rate of TC by adsorption of SC-Zn, the increasing rate in the SC-Zn/PDS/UV system (18.75%) was higher than the sum of the increases in the SC-Zn/PDS (9.87%) and SC-Zn/UV systems (3.34%), furtherly verifying the systematic superiority of this synergy effect. This study aimed to prepare a high-performance functionalized biochar activator and elucidate the rational design of deferred UV-irradiation of PDS activation to efficiently remove high-concentration antibiotic pollutants.

Ingenious use of autocatalytic hydrodeoxygenation for the separation and recovery of oil and iron from rolling oil sludge.

This paper introduces a transformative hydrodeoxygenation process for the simultaneous recovery of oil and iron from hazardous rolling oil sludge (ROS). Leveraging the inherent catalytic capabilities of iron/iron oxide nanoparticles in the sludge, our process enables the conversion of fatty acids and esters into hydrocarbons under conditions of 4.5 MPa, 330 °C, and 500 rpm. This reaction triggers nanoparticle aggregation and subsequent separation from the oil phase, allowing for effective resource recovery. In contrast to conventional techniques, this method achieves a high recovery rate of 98.3% while dramatically reducing chemical reagent consumption. The reclaimed petroleum and iron-ready for high-value applications-are worth 3910 RMB/ton. Moreover, the process facilitates the retrieval of nanoscale magnetic Fe and Fe0 particles, and the oil, with an impressive hydrocarbon content of 87.8%, can be further refined. This energy-efficient approach offers a greener, more sustainable pathway for ROS valorization.

The three-dimensional ordered macroporous structure of the Pt/TiO2-ZrO2 composite enhanced its photocatalytic performance for the photodegradation and photolysis of water.

Using polystyrene (PS) spheres as a template, three-dimensional ordered macroporous Pt/TiO2-ZrO2 (3DOM Pt/TiO2-ZrO2) composites were prepared by vacuum impregnation combined with photoreduction. The crystal structure, composition, morphology, optical absorption, and surface physicochemical properties of the as-synthetized samples were characterized by X-ray diffraction (XRD), UV-visible diffuse reflectance spectroscopy (UV-vis/DRS), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and N2 adsorption-desorption analyses. The results showed that the 3DOM Pt/TiO2-ZrO2 composites were mainly composed of anatase TiO2 and tetragonal ZrO2 crystal phases, in which Pt mainly existed as a single species. In addition, the as-synthesized composites had open, three-dimensionally ordered macroporous structures that could enhance their multi-mode photocatalytic degradation performance under UV, visible light, simulated solar light, and microwave-assisted irradiation. Moreover, the 3DOM Pt/TiO2-ZrO2 composites exhibited the best photocatalytic water splitting performance as compared to other systems.