Shape memory histocompatible and biodegradable sponges for subcutaneous defect filling and repair: greatly reducing surgical incision.

Reducing surgical incision for large area subcutaneous defect filling and repair is a great challenge in the biomedical field, especially for plastic surgery. In this study, a novel hydroxyethyl cellulose/soy protein isolate (HEC/SPI) composite sponge (EHSS) with a fluid responsive shape memory property was constructed, whose thickness could be controlled by hot-pressing conditions to reduce the required surgical incision greatly. Effects of the main factors such as pressure, temperature and hot-pressing cycles on the recovery degree of EHSS were investigated systematically. The structure and physical properties of the sponges were characterized by FTIR spectroscopy, XRD, SEM etc. The results showed that EHSS could be pressed into thin disks with much smaller thickness, and the thickness retention ratio and recovery ratio were affected by hot-pressing conditions such as pressure and temperature. Especially, EHSS could be hot-pressed into a dense thin disk (EHSS-PT-130) at 130 °C with the pressure of 30 MPa, which could quickly recover its original shape by soaking in hydrophilic fluids. EHSS-PT-130 also exhibited good hydrophilicity, cytocompatibility, histocompatibility and in vivo biodegradability. Compared with the original EHSS, in vivo shape memory EHSS-PT-130 required much smaller surgical incision to reach the same repair effect and no need of extra sterilization, showing potential application for subcutaneous defect filling and repair.

Accelerated skin wound healing by soy protein isolate-modified hydroxypropyl chitosan composite films.

In this study, a series of hydroxypropyl chitosan (HPCS)/soy protein isolate (SPI) composite films (HCSFs) with different SPI contents were developed via crosslinking, solution casting, and evaporation process. Effects of the SPI content on the structure and physical properties of the HCSFs were characterized by Fourier transform infrared spectroscopy, X-ray diffraction patterns, scanning electron microscopy, swelling kinetics analysis, and mechanical testing. The HCSFs exhibited a lower swelling ratio with an increase in the SPI content. The tensile strength was in a tunable range from 7.88 ±â€¯3.08 to 40.44 ±â€¯2.31 MPa by adjusting the SPI content. Cytocompatibility and hemocompatibility of the HCSFs were evaluated by a series of in vitro assays, including MTT assay, live/dead assay, cell morphology observation, hemolysis ratio testing, and plasma recalcification time measurement. Results showed that the HCSFs support L929 cells attachment and proliferation without obvious hemolysis, indicating good cytocompatibility and hemocompatibility. The potential of resultant HCSFs as the wound dressings was investigated using a full-thickness skin wound model in rats. Results exhibited that the HCSFs with 50% SPI content had the fastest healing speed and the best skin regeneration efficiency and may be a potential candidate as the wound dressing.

Porous cellulose spheres: Preparation, modification and adsorption properties.

Porous cellulose spheres (PCS) were fabricated by precipitating the spheres from a cellulose ionic liquid solution, followed by freezing, solvent exchange, and drying. PCS had low crystallinity and a large surface area that facilitated modification with trisodium trimetaphosphate (STMP) to introduce phosphate ester groups into the porous structure of the heterogeneous system. The STMP-modified PCS (SPCS) were used to remove heavy metal ions from aqueous solution. With increasing STMP dosage, the adsorption capacity of SPCS obviously improved due to chelation between Pb2+ and phosphate ester groups. The kinetic adsorption and isotherm data matched the pseudo-second order model and the Langmuir model well. The maximum adsorption capacity reached 150.6 mg g-1 for SPCS. SPCS were competitive with other absorbents because the phosphate ester groups and porous structure contributed to Pb2+ adsorption. Moreover, SPCS can be regenerated with ethylenediamine tetraacetic acid disodium salt (EDTA) solution for repetitious adsorption of Pb2+.

Epichlorohydrin-Cross-linked Hydroxyethyl Cellulose/Soy Protein Isolate Composite Films as Biocompatible and Biodegradable Implants for Tissue Engineering.

A series of epichlorohydrin-cross-linked hydroxyethyl cellulose/soy protein isolate composite films (EHSF) was fabricated from hydroxyethyl cellulose (HEC) and soy protein isolate (SPI) using a process involving blending, cross-linking, solution casting, and evaporation. The films were characterized with FTIR, solid-state (13)C NMR, UV-vis spectroscopy, and mechanical testing. The results indicated that cross-linking interactions occurred in the inter- and intramolecules of HEC and SPI during the fabrication process. The EHSF films exhibited homogeneous structure and relative high light transmittance, indicating there was a certain degree of miscibility between HEC and SPI. The EHSF films exhibited a relative high mechanical strength in humid state and an adjustable water uptake ratio and moisture absorption ratio. Cytocompatibility, hemocompatibility and biodegradability were evaluated by a series of in vitro and in vivo experiments. These results showed that the EHSF films had good biocompatibility, hemocompatibility, and anticoagulant effect. Furthermore, EHSF films could be degraded in vitro and in vivo, and the degradation rate could be controlled by adjusting the SPI content. Hence, EHSF films might have a great potential for use in the biomedical field.

Modification of porous starch for the adsorption of heavy metal ions from aqueous solution.

Porous starch xanthate (PSX) and porous starch citrate (PSC) were prepared in anticipation of the attached xanthate and carboxylate groups respectively forming chelation and electrostatic interactions with heavy metal ions in the subsequent adsorption process. The lead(II) ion was selected as the model metal and its adsorption by PSX and PSC was characterized. The adsorption capacity was highly dependent on the carbon disulfide/starch and citric acid/starch mole ratios used during preparation. The adsorption behaviors of lead(II) ion on PSXs and PSCs fit both the pseudo-second-order kinetic model and the Langmuir isotherm model. The maximum adsorption capacity from the Langmuir isotherm equation reached 109.1 and 57.6 mg/g for PSX and PSC when preparation conditions were optimized, and the adsorption times were just 20 and 60 min, respectively. PSX and PSC may be used as effective adsorbents for removal of heavy metals from contaminated liquid.

Nanocomposites based on plasticized starch and rectorite clay: structure and properties.

Sodium rectorite clay (REC) was attached to cationic guar gum (CGG) using a cationic-exchange reaction to obtain CGG modified-REC (CREC). It was found that CGG appeared on the surface of REC's layered structure and represented about 30.1% wt. in CREC. REC and CREC were, respectively, used as fillers in a plasticized starch (PS) matrix to prepare PS/REC and PS/CREC composites using the casting process. Rapid Visco Analyser and scanning electron microscopy revealed that an interaction existed between the REC (or CREC) filler and the matrix. Both REC and CREC had obvious reinforcing effects on the matrix. Compared to the neat matrix, REC or CREC improved the thermal stability of the composites. By increasing the filler content from 0 to 10 wt%, water vapor permeability (WVP) values of PS/REC composites obviously decreased, while WVP values of PS/CREC composites decreased slightly.

Characterization of magnetic soluble starch-functionalized carbon nanotubes and its application for the adsorption of the dyes.

Soluble starch-functionalized multiwall carbon nanotube composites (MWCNT-starch) were prepared to improve the hydrophilicity and biocompatibility of MWCNTs. Characterization of the MWCNT-starch by Fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-vis) spectroscopy, X-ray diffraction (XRD), transmission electron microscope (TEM) and thermogravimetric analysis (TG), showed that the starch component (about 14.3 wt%) was covalently grafted onto the surface of MWCNT. MWCNT-starch-iron oxide composites, intended for use as adsorbents for the removal of dyes from aqueous solutions, were prepared by synthesizing iron oxide nanoparticles at the surface of MWCNT-starch. Starch acts as a template for growth of iron oxide nanoparticles which are uniformly dispersed on the surface of the MWCNT-starch. MWCNT-starch-iron oxide exhibits superparamagnetic properties with a saturation magnetization (23.15 emu/g) and better adsorption for anionic methyl orange (MO) and cationic methylene blue (MB) dyes than MWCNT-iron oxide.

Preparation, characterization, and in vitro and in vivo evaluation of cellulose/soy protein isolate composite sponges.

A series of cellulose/soy protein isolate (SPI) sponges was prepared using a freeze-drying process. The effect of the SPI content on the structure of the sponges was characterized by Fourier transform infrared spectrometry (FT-IR), X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM). It showed that the sponges were porous in structure, and that the size of the pores increased and the thickness of the pore walls decreased as the SPI content of the sponges increased. The biocompatibility and biodegradability of the sponges were evaluated in vitro and in vivo. The cell culture experiment and SEM observations showed that L929 fibroblast cells grew and spread well on the surface and cross-section of the composite sponges. The results from MTT (3-[4,5-dimethyl-2-thiazoly1]-2,5-diphenyl-2H-tetrazolium bromide) assay indicated that the cell viability of L929 cultured in extracts from SPI-containing sponges was higher than that from the pure cellulose sponge. The historical analysis and SEM observation revealed that the SPI-containing sponges implanted from 1 to 8 months in rats exhibited better in vivo biocompatibility and biodegradability than the pure cellulose sponge. This was due to the incorporation of SPI into cellulose and to the freeze-drying process which formed large pores and thin pore walls in the composite sponges, promoting the migration of cells and tissue into the sponges, leading to gradual fusing with the implants. The new cellulose/SPI sponges thus have potential applications as biomaterials with good biocompatibility and biodegradability.