Source diagnostic and weathering indicators of tar balls utilizing acyclic, polycyclic and S-heterocyclic components.

This study represents a forensic chemical analysis to define the liability for the coastal bitumens polluting the beaches of the Mediterranean city of Alexandria. Six tar balls collected from several locations along the coast of the city were analyzed for their acyclic and polycyclic hydrocarbons as well as sulfur heterocycles using GC/FID, GC/AED and gas chromatography/mass spectrometry techniques. The analysis of one Egyptian crude oil is also included as a possible source oil. The tar ball samples were at early stages of weathering. Based on the GC traces and biomarker signatures, the tar balls could be genetically different. One sample collected from the Eastern Harbor region appears to be a Bunker C type fuel produced from Egyptian crudes. The refining process has removed the low molecular weight components. On the other hand, the wide n-alkane distribution together with the absence of an unresolved complex mixture suggests that crude oils probably from tank washings, ballast discharges or accident spills from tankers could have contributed significantly to the other tar ball samples. The distribution of source specific hopane and sterane markers revealed that the tar samples probably originate from different oil fields.

Fast and direct method for measuring 1-octanol-water partition coefficients exemplified for six local anesthetics.

The 1-octanol-water partition coefficients (P(OW)) of six local anesthetics were determined by an improved direct method. In the experimental setup, dialysis tubing is used to separate the aqueous from the octanol phase containing the analyte. This procedure allows the application of ultrasonic agitation to shorten the equilibration time to 2 h. The measurements had a reproducibility of +/- 0.1 log units and showed an excellent agreement with the results obtained with the traditional shake-flask method. However, the correlation with the indirect determination using reversed-phase liquid chromatography was considerably poorer, showing that high-performance liquid chromatography determinations are not always very reliable. Because all the anesthetics used are nitrogen bases, the measurements were performed at two pH values. The method allows a fast and reliable direct determination of partition coefficients.

Microwave-assisted extraction of polycyclic aromatic compounds from coal.

Microwave-assisted extraction (MAE) of polycyclic aromatic compounds (PACs) from coal is shown to give the same pattern of compounds as Soxhlet extraction. MAE requires only 10 mL solvent and 10 min extraction time whereas Soxhlet uses 200 mL and takes 24 h. Although the yields were lower, dichloromethane (DCM) was preferred to pyridine, N-methyl-2-pyrrolidone (NMP), and NMP with CS2 because the pattern of the PACs is shown to be independent of solvent and DCM is a much more convenient solvent to work with.

Determination of alkylphenols after derivatization to ferrocenecarboxylic acid esters with gas chromatography-atomic emission detection.

A method is described for the rapid determination of alkylphenols in nonpolar matrixes. The alkylphenols are derivatized with ferrocenecarboxylic acid chloride so that every phenol molecule is labeled with one iron atom. The resulting esters are analyzed by gas chromatography with atomic emission detection (AED) in the iron-selective detection mode. This method utilizes the AED's low detection limit (0.05 pg/s) for iron and the high selectivity versus carbon (3.5 x 10(6)) for the detection of the alkylphenols. Because the derivatization is performed before the first step of sample preparation, the risk of analyte loss by adsorption or volatilization is minimized. The total recoveries in the lower ppm concentration range vary between 79 and 125%. The quantification of 20 C0-C3-alkylphenols in crude oils is demonstrated by analyzing a shale oil (SRM 1580) and a petroleum crude oil (SRM 1582). The complete workup is easily carried out in only 45 min/sample.

Prediction of gas chromatographic retention indices of polychlorinated dibenzothiophenes on non-polar columns.

Polychlorodibenzothiophenes (PCDTs) have been found in several kinds of environmental samples. The lack of reference compounds has meant that very little is known about their gas chromatographic behavior. Here we discuss the retention of 19 authentic PCDTs and their sulfones on the widely used gas chromatographic stationary phases DB-5 and DB-5ms. The retention order is different from that of the polychlorodibenzofurans. The data generated allowed us to carry out a multiple linear regression to generate parameters for predicting the retention indices of unknown congeners based only on their structural features.

Bacterial transformations of 1,2,3,4-tetrahydrodibenzothiophene and dibenzothiophene.

The transformations of 1,2,3,4-tetrahydrodibenzothiophene (THDBT) were investigated with pure cultures of hydrocarbon-degrading bacteria. Metabolites were extracted from cultures with dichloromethane (DCM) and analyzed by gas chromatography (GC) with flame photometric, mass, and Fourier transform infrared detectors. Three 1-methylnaphthalene (1-MN)-utilizing Pseudomonas strains oxidized the sulfur atom of THDBT to give the sulfoxide and sulfone. They also degraded the benzene ring to yield 3-hydroxy-2-formyl-4,5,6,7-tetrahydrobenzothiophene. A cell suspension of a cyclohexane-degrading bacterium oxidized the alicyclic ring to give a hydroxy-substituted THDBT and a ketone, and it oxidized the aromatic ring to give a phenol, but no ring cleavage products were detected. GC analyses with an atomic emission detector, using the sulfur-selective mode, were used to quantify the transformation products from THDBT and dibenzothiophene (DBT). The cyclohexane degrader oxidized 19% of the THDBT to three metabolites. The cometabolism of THDBT and DBT by the three 1-MN-grown Pseudomonas strains resulted in a much greater depletion of the condensed thiophenes than could be accounted for in the metabolites detected by GC analysis, but there was no evidence of sulfate release from DBT. These 1-MN-grown strains transiently accumulated 3-hydroxy-2-formylbenzothiophene (HFBT) from DBT, but it was subsequently degraded. On the other hand, Pseudomonas strain BT1d, which was maintained on DBT as a sole carbon source, accumulated 52% of the sulfur from DBT as HFBT over 7 days, and, in total, 82% of the sulfur from DBT was accounted for by the GC method used. Lyophilization of cultures grown on 1-MN with DBT and methyl esterification of the residues gave improved recoveries of total sulfur over that obtained by DCM extraction and GC analysis. This suggested that the further degradation of HFBT by these cultures leads to the formation of organosulfur compounds that are too polar to be extracted with DCM. We believe that this is the first attempt to quantify the products of DBT degradation by the so-called Kodama pathway.

Bacterial transformations of naphthothiophenes.

Naphthothiophenes are minor components of fossil fuels, and they can enter the environment from oil spills. Naphtho[2,1-b]thiophene, naphtho[2,3-b]thiophene, and 1-methylnaphtho[2,1-b]thiophene were synthesized and used in biodegradation studies with 1-methylnaphthalene (1-MN)-degrading Pseudomonas strains W1, F, and BT1. Cultures were incubated with one of the naphthothiophenes with or without 1-MN, acidified, and extracted with CH(inf2)Cl(inf2). The extracts were analyzed by gas chromatography with flame photometric and mass detectors to characterize sulfur-containing metabolites and with an atomic emission detector for quantification. Only strain W1 was able to grow on naphtho[2,1-b]thiophene, but strains F and BT1 cometabolized this compound if 1-MN was present. 1-MN was required by all three strains to metabolize naphtho[2,3-b]thiophene, which was more resistant to biodegradation than the [2,1-b] isomer. Two metabolites of naphtho [2,1-b]thiophene were purified, analyzed by (sup1)H nuclear magnetic resonance spectroscopy, and found to be 4-hydroxybenzothiophene-5-carboxylic acid (metabolite I) and 5-hydroxybenzothiophene-4-carboxylic acid (metabolite II). In cultures of strain W1 grown for 7 days on 52 (mu)mol of naphtho[2,1-b]thiophene, >84% of the substrate was degraded and metabolites I and II accounted for 19 and 9%, respectively, of the original amount of naphtho[2,1-b]thiophene. When 1-MN was present, strain W1 degraded >97% of the naphtho[2,1-b]thiophene and similar amounts of metabolite II were produced, but metabolite I did not accumulate. 1-MN was shown to promote the further degradation of metabolite I, but not of metabolite II, by strain W1. Thus, 1-MN enhanced the biodegradation of naphtho[2,1-b]thiophene. Approximately 70% of the 1-methylnaphtho [2,1-b]thiophene added to cultures of strain W1 with 1-MN was recovered as 4-hydroxy-3-methylbenzothiophene-5-carboxylic acid, the 3-methyl analog of metabolite I. The methyl substitution hindered further metabolism of 3-methyl-metabolite I even in the presence of 1-MN. Cometabolism of naphtho[2,3-b]thiophene yielded two products that were tentatively identified as 5-hydroxybenzothiophene-6-carboxylic and 6-hydroxybenzothiophene-5-carboxylic acids.

Bacterial transformations of naphthothiophenes.

Vol. 63, no. 9, p. 3468, Table 1, subheading under heading "Total recovery": "((delta)mol)" should read "((mu)mol)." [This corrects the article on p. 3463 in vol. 63.].

Critical examination of the quantification of aromatic compounds in three standard reference materials.

Three standard reference materials from the National Institute of Standards and Technology (NIST), namely, SRM 1597 coal tar, 1582 crude oil, and 1580 shale oil, were investigated in detail to determine the concentration of polycyclic aromatic sulfur heterocycles using gas chromatography with the atomic emission detector in the carbon- and sulfur-selective modes. Coelution problems were found to be common, and the use of two capillary gas chromatographic columns with stationary phases of widely differing polarity was necessary for the separation of the important analytes phenanthrene, anthracene, dibenzothiophene, and the naphthothiophenes. On the commonly used nonpolar stationary phases, phenanthrene and dibenzothiophene coelute with the isomeric naphthothiophenes and this leads to too high concentrations being measured for the two major analytes and must be corrected for. For (sulfur and oxygen) heterocycles, individual response factors must be used if the flame ionization detector is employed. The NIST values were obtained without regard to those factors. This is done here for the three SRMs, and it is shown that the adjusted NIST values agree very well with the GC/AED values. It is suggested that the (noncertified) NIST values for several polycyclic aromatic compounds (PACs) should be reexamined. Very probably many other determinations of PACs might suffer from the same shortcomings.

Transformations of six isomers of dimethylbenzothiophene by three Pseudomonas strains.

Dimethylbenzothiophenes are among the sulfur heterocycles in petroleum that are known to be degraded by microbial activity. Six of the 15 possible isomers of dimethylbenzothiophene were synthesized and used in bio-transformation studies with three Pseudomonas isolates that oxidize a variety of condensed thiophenes including methylbenzothiophenes and methyldibenzothiophenes. The isomers of dimethylbenzothiophene were chosen to have a variety of substitution patterns: both methyl groups on the thiophene ring (the 2,3-isomer); a methyl group on each of the rings (the 2,7-, 3,5-and 3,7-isomers); and both methyl groups on the benzene ring (the 4,6-and 4,7-isomers). Each isolate was grown on 1-methylnaphthalene or glucose in the presence of one of the dimethylbenzothiophenes and culture extracts were analyzed to identify nearly 30 sulfur-containing metabolites in total. Sulfoxides and sulfones were commonly found metabolites in culture extracts from the 2,3-, 2,7- and 3,7-isomers, whereas 2,3-diones, 3(2H)-ones and 2(3H)-ones were formed from the 4,6- and 4,7-isomers. High-molecular-weight products, some of which were tentatively identified as tetramethylbenzo[b]naphtho[1,2-d]thiophenes, were detected in the extracts of cultures incubated with 4,6- or 4,7-dimethylbenzothiophene. The methyl groups of all of the isomers, except 4,6-, were oxidized to give hydroxymethyl-methylbenzothiophenes and methylbenzothiophene-carboxylic acids, and these were the only products detected from the oxidation of 3,5-dimethylbenzothiophene.

Microbially Mediated Formation of Benzonaphthothiophenes from Benzo[b]thiophenes.

Studies of the microbial metabolism of benzo[b]thiophene (molecular weight 134) by three Pseudomonas isolates showed the formation of benzothiophene sulfoxide, benzothiophene sulfone, and a sulfur-containing metabolite with a molecular weight of 234. Desulfurization of the high-molecular-weight product with nickel boride gave 1-phenylnaphthalene, indicating that the metabolite was benzo[b]naphtho[1,2-d]thiophene. Similarly, the isolates were capable of producing the analogous dimethyl-substituted benzonaphthothiophenes from methylbenzothiophenes that had the methyl substitution on the benzene ring. The formation of benzo[b] naphtho[1,2-d]thiophene was also observed when a petroleum-degrading mixed culture was incubated with benzothiophene-supplemented Prudhoe Bay crude oil. Investigations into the mechanism of formation of these high-molecular-weight compounds showed that they resulted from an abiotic, Diels-Alder-type condensation of two molecules of the sulfoxide, which were microbially produced from the respective benzothiophene, with the subsequent loss of two atoms of hydrogen and oxygen and one atom of sulfur. The condensation products also formed from the sulfoxides of benzothiophene and methylbenzothiophenes when the sulfoxides were enzymatically synthesized by oxidation of the benzothiophene with horse heart cytochrome c and H(2)O(2).