Testicular metastasis of colon cancer masquerading a hydrocele of testis.

A case of testicular metastasis of colon cancer, which clinically mimicked a hydrocele of the testis, is presented. Imaging study suggested a scrotal hydrocele, but slow yet gradual enlargement of the hydrocele and the past history of colon cancer prompted an orchiectomy for the pathologic diagnosis and treatment. The pathologic diagnosis was testicular metastasis of colon cancer. Testicular metastasis presenting as a hydrocele is unusual, and imaging and macroscopic findings useful for the differential diagnoses are discussed. A brief review of pertinent literature is also included.

Photoluminescent Ozone Sensor with Enhanced Sensitivity by Using CdSe/ZnS Quantum Dots Modified with Gold and Platinum.

We report photoluminescence-based ozone sensing using composite films composed of gold or platinum and red-emitting CdSe/ZnS core-shell quantum dots. The sensing efficiency of quantum dots is enhanced by the addition of noble metals. The composite films undergo reversible changes in photoluminescence intensity (measured at excitation/emission wavelengths of 365/652 - 659 nm) in the presence of ppm levels of ozone in air at 25°C and at atmospheric pressure. The sensitivity of the composite films does not saturate with ozone in the 0.5 - 200 ppm concentration range. When compared with a quantum dot-only film, the composite films show higher sensitivities to 0.5 ppm ozone of 27% (gold) and 43% (platinum). When compared with a quantum dot-only film, the photoluminescence of the gold- or platinum-palladium alloy-based film recovers faster after the removal of ozone in the surrounding atmosphere. Thus, platinum- or gold-conjugated quantum-dot films form sensor modules for the reversible and highly sensitive detection of ozone under the tested ambient conditions.

Development of Technologies for Sensing Ozone in Ambient Air.

Ozone (O3) gas is widely used as a strong oxidizing agent for many purposes, such as the decomposition/removal of organic contaminants and photoresist, and the deodorization/disinfection of air and water. However, ozone is highly toxic to the human body when the air concentration exceeds about 1 ppm. Therefore, there is increasing demand for simple, sensitive, reliable, and cost-effective techniques for sensing ozone gas. This article describes the features, advantages, and disadvantages of the available, practical techniques for sensing ozone gas in ambient air. The advantages of optical gas sensors as next-generation sensors is specifically introduced. The features of photoluminescent, semiconductor nanoparticles (quantum dots, QDs) as bright phosphors with the potential for various applications is further explored. Lastly, recent research results demonstrating the ozone sensitivity of photoluminescent CdSe-based core-shell quantum dots are presented. These results strongly suggest that optical ozone sensing using photoluminescent quantum dots is a promising technique.

2-Hydrazinoquinoline: a reactive matrix for matrix-assisted laser desorption/ionization mass spectrometry to detect gaseous carbonyl compounds.

The sensitivity, range of applications, and reaction mechanism of 2-hydrazinoquinoline as a reactive matrix for matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) were examined. Using a reaction chamber (125L) equipped with a stirring fan and a window for moving the MALDI-MS plate and volatile samples in and out, the sensitivities of 2-hydrazinoquinoline to gaseous aldehydes (formaldehyde, acetaldehyde, propionaldehyde, and n-butyraldehyde) and ketones (acetone, methyl ethyl ketone, and methyl isobutyl ketone) were determined to be at least parts per million (ppm) levels. On the other hand, carboxylic acids (formic acid, acetic acid, propionic acid, and butyric acid) and esters (ethyl acetate, pentyl acetate, isoamyl acetate, and methyl salicylate) could not be detected by 2-hydrazinoquinoline in MALDI-MS. In addition to 2,4-dinitrophenylhydrazine, a common derivatization reagent for analyzing carbonyl compounds quantitatively in gas chromatography and liquid chromatography, the dissolution of 2-hydrazinoquinoline in an acidic solution, such as trifluoroacetic acid, was essential for its function as a reactive matrix for MALDI- MS.

Cytotoxicity of CdSe-based quantum dots incorporated in glass nanoparticles evaluated using human keratinocyte HaCaT cells.

CdSe quantum dots (QDs) are potential fluorescent reagents, but leakage of Cd and Se often induces cytotoxicity. Here we prepared CdSe-based QDs with glass to reduce their leakage and examined their cytotoxicity using keratinocyte cells. The cytotoxicity of the QDs with glass was obviously lower than that of the commercial QDs with polymer, suggesting their safety for biological applications.

Hydrazide and hydrazine reagents as reactive matrices for MALDI-MS to detect gaseous aldehydes.

The reagents 19 hydrazide and 14 hydrazine were examined to function as reactive matrices for matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) to detect gaseous aldehydes. Among them, two hydrazide (2-hydroxybenzohydrazide and 3-hydroxy-2-naphthoic acid hydrazide) and two hydrazine reagents [2-hydrazinoquinoline and 2,4-dinitrophenylhydrazine (DNPH)] were found to react efficiently with carbonyl groups of gaseous aldehydes (formaldehyde, acetaldehyde and propionaldehyde); these are the main factors for sick building syndrome and operate as reactive matrices for MALDI-MS. Results from accurate mass measurements by JMS-S3000 Spiral-TOF suggested that protonated ion peaks corresponding to [M + H](+) from the resulting derivatives were observed in all cases with the gaseous aldehydes in an incubation, time-dependent manner. The two hydrazide and two hydrazine reagents all possessed absorbances at 337 nm (wavelength of MALDI nitrogen laser), with, significant electrical conductivity of the matrix crystal and functional groups, such as hydroxy group and amino group, being important for desorption/ionization efficiency in MALDI-MS. To our knowledge, this is the first report that gaseous molecules could be derivatized and detected directly in a single step by MALDI-MS using novel reactive matrices that were derivatizing agents with the ability to enhance desorption/ionization efficiency.

From metal-organic framework to intrinsically fluorescent carbon nanodots.

Highly photoluminescent carbon nanodots (CNDs) were synthesized for the first time from metal-organic framework (MOF, ZIF-8) nanoparticles. Coupled with fluorescence and non-toxic characteristics, these carbon nanodots could potentially be used in biosafe color patterning.

Highly luminescent CdSe/Cd(x)Zn(1-x)S quantum dots coated with thickness-controlled SiO2 shell through silanization.

A silanization technique of hydrophobic quantum dots (QDs) was applied to SiO(2)-coated CdSe/Cd(x)Zn(1-x)S QDs to precisely control the SiO(2) shell thickness and retain the original high photoluminescence (PL) properties of the QDs. Hydrophobic CdSe/Cd(x)Zn(1-x)S core-shell QDs with PL peak wavelengths of 600 and 652 nm were prepared by a facile organic route by using oleic acid (OA) as a capping agent. The QDs were silanized by using partially hydrolyzed tetraethyl orthosilicate by replacing surface OA. These silanized QDs were subsequently encapsulated in a SiO(2) shell by a reverse micelles synthesis. The silanization plays an important role for the QDs to be coated with a homogeneous SiO(2) shell and retain a high PL efficiency in water. Transmission electron microscopy observation shows that the shells are 1-9 nm with final particle sizes of 10-25 nm, depending on the initial QD size. In the case of short reaction time (6 h), the QDs were coated with a very thin SiO(2) layer because no visible SiO(2) shell was observed but transferred into the water phase. The silica coating does not change the PL peak wavelength of the QDs. The full width at half-maximum of PL was decreased 4 nm after coating for QDs emitting at both 600 and 652 nm. The PL efficiency of the SiO(2)-coated is up to 40%, mainly determined by the initial PL efficiency of the underlying CdSe/Cd(x)Zn(1-x)S QDs.

Controlled self-assembly of hydrophobic quantum dots through silanization.

We demonstrate the formation of one-, two-, and three-dimensional nanocomposites through the self-assembly of silanized CdSe/ZnS quantum dots (QDs) by using a controlled sol-gel process. The self-assembly behavior of the QDs was created when partially hydrolyzed silicon alkoxide monomers replaced hydrophobic ligands on the QDs. We examined systematically self-assembly conditions such as solvent components and QD sizes in order to elucidate the formation mechanism of various QD nanocomposites. The QD nanocomposites were assembled in water phase or on the interface of water and oil phase in emulsions. The partially hydrolyzed silicon alkoxides act as intermolecules to assemble the QDs. The QD nanocomposites with well-defined solid or hollow spherical, fiber-like, sheet-like, and pearl-like morphologies were prepared by adjusting the experimental conditions. The high photoluminescence efficiency of the prepared QD nanocomposites suggests partially hydrolyzed silicon alkoxides reduced the surface deterioration of QDs during self-assembly. These techniques are applicable to other hydrophobic QDs for fabricating complex QD nanocomposites.

Highly luminescent SiO(2) beads with multiple QDs: Preparation conditions and size distributions.

Multiple CdTe quantum dots (QDs) were incorporated in SiO(2) beads using a reverse micelle route (i.e., a water-in-oil emulsion) and a precursor solution of SiO(2)-coated CdTe QDs as the water phase. The QDs in the beads retained their initial photoluminescence efficiency (56%) because they had a thin SiO(2) shell that prevented removal of the ligands from their surface during incorporation. Because of the SiO(2) sol in the precursor solution, the size of the water pools in water-in-oil emulsion increased to 700±320nm compared to 25±5nm when an aqueous CdTe QD solution was used. The size of the beads prepared in the water pools depended strongly on the preparation parameters (water phase injection speed, tetraethyl orthosilicate concentration, reaction time). The beads were easily separated into three size ranges (60±23, 160±40, and 650±200nm) by filtering for further application.

Various Au nanoparticle organizations fabricated through SiO2 monomer induced self-assembly.

A novel method has been developed to fabricate the assembly of Au colloidal nanoparticles (NPs) using SiO(2) monomers. The key strategy was the use of a controlled sol-gel procedure including hydrolysis, deposition, and condensation of tetraethyl orthosilicate (TEOS). Namely, the assembly of Au NPs was created by the anisotropic deposition of SiO(2) monomers and subsequent permanent fixing by the growth of a SiO(2) shell. Various assemblies of Au NPs such as dimer, trimer, and pearl-chain morphology were fabricated by systematically changing the concentration and injection speed of TEOS. A longitudinal plasmon resonance band was observed as a result of the assembly of Au NPs and can be tuned from visible to near-infrared by altering the length of pearl-chain morphology. In addition, single Au NP was homogeneously coated with a SiO(2) shell by means of controlling the deposition rate of SiO(2) monomers during a Stöber synthesis without the use of a silane coupling agent or bulk polymer as the surface primer to render the Au surface vitreophilic. The Au NPs (mean size 11.4 nm in diameter) were thus encapsulated into SiO(2) beads with a wide range of sizes (from 20 to 50 nm in diameter). These pure SiO(2)-coated Au beads with tunable shell thickness should be crucial for biosensors, particularly as Raman-tag particles.

MicroRNA-206 is highly expressed in newly formed muscle fibers: implications regarding potential for muscle regeneration and maturation in muscular dystrophy.

miR-1, miR-133a, and miR-206 are muscle-specific microRNAs expressed in skeletal muscles and have been shown to contribute to muscle development. To gain insight into the pathophysiological roles of these three microRNAs in dystrophin-deficient muscular dystrophy, their expression in the tibialis anterior (TA) muscles of mdx mice and CXMD(J) dogs were evaluated by semiquantitative RT-PCR and in situ hybridization. Their temporal and spatial expression patterns were also analyzed in C2C12 cells during muscle differentiation and in cardiotoxin (CTX)-injured TA muscles to examine how muscle degeneration and regeneration affect their expression. In dystrophic TA muscles of mdx mice, miR-206 expression was significantly elevated as compared to that in control TA muscles of age-matched B10 mice, whereas there were no differences in miR-1 or miR-133a expression between B10 and mdx TA muscles. On in situ hybridization analysis, intense signals for miR-206 probes were localized in newly formed myotubes with centralized nuclei, or regenerating muscle fibers, but not in intact pre-degenerated fibers or numerous small mononucleated cells, possibly proliferating myoblasts and inflammatory infiltrates. Similar increased expression of miR-206 was also found in C2C12 differentiation and CTX-induced regeneration, in which differentiated myotubes or regenerating fibers showed abundant expression of miR-206. However, CXMD(J) TA muscles contained smaller amounts of miR-206, miR-1, and miR-133a than controls. They exhibited more severe and more progressive degenerative alterations than mdx TA muscles. Taken together, these observations indicated that newly formed myotubes showed markedly increased expression of miR-206, which might reflect active regeneration and efficient maturation of skeletal muscle fibers.

Synthesis of Cd-free water-soluble ZnSe(1-x)Te(x) nanocrystals with high luminescence in the blue region.

Cd-free core-shell nanocrystals (ZnSe(1-x)Te(x)/ZnS, 0

Acid-catalyzed isomerization and decomposition of ketone-2,4-dinitrophenylhydrazones.

The quantitative analysis of ketones using DNPH is usually conducted in the presence of an acid catalyst. However, this method may cause an analytical error because 2,4-dinitrophenylhydrazones have both E- and Z-stereoisomers. Purified ketone-2,4-dinitrophenylhydrazone comprised only the E-isomer. However, under the addition of acid, both E- and Z-isomers were seen. In the case of 2-butanone-, 2-pentanone- and 2-hexanone-2,4-dinitrophenylhydrazone, the equilibrium Z/E isomer ratios were 0.20, 0.21 and 0.22, respectively. In addition, when trace water was added to the hydrazone derivatives in acetonitrile solution, the concentration of ketone derivatives were seen to decrease and the concentration of free DNPH was seen to increase. The decomposition rate of 2-butanone-2,4-dinitrophenylhydrazone was dependent on the concentration of acid-catalysis and reached an equilibrium state--carbonyl, DNPH, hydrazone-derivative and H2O--within 10 h at 0.1 mol L(-1) phosphoric acid solution. The equilibrium constants of ketone-2,4-dinitrophenylhydrazones, [carbonyl] [DNPH]/[hydrazone] [H2O], were relatively large and ranged from 0.74x10(-4) to 5.9x10(-4). Hydrazone derivatives formed from 2-ketones such as 2-pentanone, 2-hexanone and 4-methyl-2-pentanone showed lower equilibrium constants than corresponding 3-ketones. Consequently, only a minimum concentration of catalytic acid must be added. The best method for the determination of ketone-2,4-dinitrophenylhydrazones by HPLC or GC is to add phosphoric acid to both the standard reference solution and samples, forming a 0.001 mol L(-1) acid solution, and analyze after 27 h.

Encapsulation of emitting CdTe QDs within silica beads to retain initial photoluminescence efficiency.

Highly luminescent silica beads (30 nm-2 mum slashed circle) incorporating CdTe quantum dots (QDs) were prepared via a two-step preparation procedure, namely a modified Stöber synthesis and a subsequent reverse micelle route. In the modified Stöber synthesis, the silica molecules are deposited on the surface of the QDs. After this first step, these coated QDs were incorporated into silica beads via a reverse micelle route. Inductively coupled plasma analysis revealed a red-emitting silica bead of 30 nm in diameter thus prepared encapsulated roughly 14 CdTe QDs. These glass beads (30-40 nm slashed circle) retained the initial photoluminescence (PL) efficiencies of the colloidal QDs (27 and 65% for the green- and red-emitting beads, respectively). The protection of QDs by a silica layer at the first step, together with the short total reaction time, is the main reason for the retention of the PL efficiency. The size of the glass beads can be easily controlled over the wide range by adjusting the injection speed and the ratio of chemicals used for the reverse micelle preparation. Since the original efficiency was maintained in the beads and is the highest ever reported for QD-containing silica beads, the method presented here is of significant importance for applications of silica beads to biological probes.

Blue-emitting small silica particles incorporating ZnSe-based nanocrystals prepared by reverse micelle method.

ZnSe-based nanocrystals (ca. 4-5 nm in diameter) emitting in blue region (ca. 445 nm) were incorporated in spherical small silica particles (20-40 nm in diameter) by a reverse micelle method. During the preparation, alkaline solution was used to deposit the hydrolyzed alkoxide on the surface of nanocrystals. It was crucially important for this solution to include Zn(2+) ions and surfactant molecules (thioglycolic acid) to preserve the spectral properties of the final silica particles. This is because these substances in the solution prevent the surface of nanocrystals from deterioration by dissolution during processing. The resultant silica particles have an emission efficiency of 16% with maintaining the photoluminescent spectral width and peak wavelength of the initial colloidal solution.

Determination of orthophthalaldehyde in air using 2,4-dinitrophenylhydrazine-impregnated silica cartridge and high-performance liquid chromatography.

A new method is described for the determination of orthophthalaldehyde in air which is used for the disinfection of various instruments (e.g. endoscopes) in hospital. Orthophthalaldehyde in air was collected with a silica gel cartridge impregnated with acidified 2,4-dinitrophenylhydrazine (DNPH-cartridge) and derivatives were analyzed by high-performance liquid chromatography (HPLC). In this study, the derivatization was examined by comparing the process with three phthalaldehyde isomers (ortho-, iso- and tere-). In the case of iso- and tere-phthalaldehyde, derivatives synthesized with excess of aldehyde consisted mainly of mono-derivatives, and derivatives synthesized with excess of DNPH consisted mainly of bis-derivative. In the case of orthophthalaldehyde, derivative consisted of only bis-derivative and mono-derivative was never observed under any conditions. Orthophthalaldehyde was completely retained by the DNPH-cartridge during air sampling, however, the derivatization reaction was incomplete and unreacted orthophthalaldehyde was flushed from the cartridge during the subsequent solvent extraction process. Unreacted orthophthalaldehyde and DNPH reacted again in the extraction solvent solution. Immediately after the solvent extraction, both mono- and bis-DNPhydrazone derivatives of orthophthalaldehyde were present in the solution. However, over time, the mono-derivative decreased and bis-derivative increased until only the bis-derivative was left allowing accurate determination of the orthophthalaldehyde concentration. The transformation of mono-derivative to bis-derivative was faster in polar aprotic solvents such as acetonitrile, dimethyl sulfoxide and ethyl acetate. Transformation was found to occur most quickly in acetonitrile solvent and was completed in 4 h in this case. It was possible to measure orthophthalaldehyde in air as bis-derivative using a DNPH impregnated silica cartridge and HPLC analysis.

Analysis of herbicides in water using temperature-responsive chromatography and an aqueous mobile phase.

A simple and rapid method has been developed for herbicides in water using temperature-responsive liquid chromatography (LC) and a column packed with poly(N-isopropylacrylamide) (PNIPAAm), a polymer anchored on the stationary-phase surface of modified silica. PNIPAAm reversibly changes its hydrophilic/hydrophobic properties in water in response to temperature. The method was used to determine five sulfonylurea and three urea herbicides. Separation was achieved with a 10 mM ammonium acetate (pH 3.0) isocratic aqueous mobile phase, and by changing the column temperature. The analytes were extracted from water by off-line solid-phase extraction (SPE) with an N-vinyl-pyrrolidone polymer cartridge. The average recoveries of the eight herbicides from spiked pure water, tap water and river water were 70-130% with relative standard deviations (RSDs) of <10%. The limits of quantitation (LOQ) of the eight herbicides were between 1 and 4 microg l(-1).

Functional characterization of five novel CYP2C8 variants, G171S, R186X, R186G, K247R, and K383N, found in a Japanese population.

Cytochrome P450 2C8 is one of the primary enzymes responsible for the metabolism of a wide range of drugs such as paclitaxel, cerivastatin, and amiodarone. We have sequenced the CYP2C8 gene from 201 Japanese subjects and found five novel nonsynonymous single nucleotide polymorphisms (SNPs): 511G>A (G171S), 556C>T (R186X; X represents the translational stop codon), 556C>G (R186G), 740A>G (K247R), and 1149G>T (K383N), with the allele frequency of 0.0025. The CYP2C8 variants were heterologously expressed in COS-1 cells and functionally characterized in terms of expression level, paclitaxel 6alpha-hydroxylase activity, and intracellular localization. The prematurely terminated R186X variant was undetectable by Western blotting and inactive toward paclitaxel 6alpha-hydroxylation. The G171S, K247R, and K383N variants exhibited properties similar to those of the wild-type CYP2C8. Paclitaxel 6alpha-hydroxylase activity of the R186G transfectant was only 10 to 20% that of wild-type CYP2C8. Furthermore, the R186G variant displayed a lower level of protein expression in comparison to the wild type, which was restored by the addition of a proteasome inhibitor (MG-132; Z-Leu-Leu-Leu-aldehyde). The reduced CO-difference spectral analysis using recombinant proteins from an insect cell/baculovirus system revealed that the R186G variant has a minor peak at 420 nm in addition to the characteristic Soret peak at 450 nm, suggesting the existence of improperly folded protein. These results indicate that the novel CYP2C8 SNPs, 556C>T (R186X) and 556C>G (R186G), could influence the metabolism of CYP2C8 substrates such as paclitaxel and cerivastatin.