Efficient Visible Light Photocatalytic Hydrogen Evolution by Boosting the Interfacial Electron Transfer in Mesoporous Mott-Schottky Heterojunctions of Co2P-Modified CdIn2S4 Nanocrystals.

Photocatalytic water splitting for hydrogen generation is an appealing means of sustainable solar energy storage. In the past few years, mesoporous semiconductors have been at the forefront of investigations in low-cost chemical fuel production and energy conversion technologies. Mesoporosity combined with the tunable electronic properties of semiconducting nanocrystals offers the desired large accessible surface and electronic connectivity throughout the framework, thus enhancing photocatalytic activity. In this work, we present the construction of rationally designed 3D mesoporous networks of Co2P-modified CdIn2S4 nanoscale crystals (ca. 5-6 nm in size) through an effective soft-templating synthetic route and demonstrate their impressive performance for visible-light-irradiated catalytic hydrogen production. Spectroscopic characterizations combined with electrochemical studies unravel the multipathway electron transfer dynamics across the interface of Co2P/CdIn2S4 Mott-Schottky nanoheterojunctions and shed light on their impact on the photocatalytic hydrogen evolution chemistry. The strong Mott-Schottky interaction occurring at the heterointerface can regulate the charge transport toward greatly improved hydrogen evolution performance. The hybrid catalyst with 10 wt % Co2P content unveils a H2 evolution rate of 20.9 mmol gcat -1 h-1 under visible light irradiation with an apparent quantum efficiency (AQE) up to 56.1% at 420 nm, which is among the highest reported activities. The understanding of interfacial charge-transfer mechanism could provide valuable insights into the rational development of highly efficient catalysts for clean energy applications.

Just Soaping Them: The Simplest Method for Converting Metal Organic Frameworks into Superhydrophobic Materials.

The incorporation of superhydrophobic properties into metal organic framework (MOF) materials is highly desirable to enhance their hydrolytic stability, gas capture selectivity in the presence of humidity and efficiency in oil-water separations, among others. The existing strategies for inducing superhydrophobicity into MOFs have several weaknesses, such as increased cost, utilization of toxic reagents and solvents, applicability for limited MOFs, etc. Here, we report the simplest, most eco-friendly, and cost-effective process to impart superhydrophobicity to MOFs, involving a rapid (90 min) treatment of MOF materials with solutions of sodium oleate, a main component of soap. The method can be applied to both hydrolytically stable and unstable MOFs, with the porosity of modified MOFs approaching, in most cases, that of the pristine materials. Interestingly, this approach was used to isolate superhydrophobic magnetic MOF composites, and one of these materials formed stable liquid marbles, whose motion could be easily guided using an external magnetic field. We also successfully fabricated superhydrophobic MOF-coated cotton fabric and fiber composites. These composites exhibited exceptional oil sorption properties achieving rapid removal of floating crude oil from water, as well as efficient purification of oil-in-water emulsions. They are also regenerable and reusable for multiple sorption processes. Overall, the results described here pave the way for an unprecedented expansion of the family of MOF-based superhydrophobic materials, as virtually any MOF could be converted into a superhydrophobic compound by applying the new synthetic approach.

Mesoporous Dual-Semiconductor ZnS/CdS Nanocomposites as Efficient Visible Light Photocatalysts for Hydrogen Generation.

The development of functional catalysts for the photogeneration of hydrogen (H2) via water-splitting is crucial in the pursuit of sustainable energy solutions. To that end, metal-sulfide semiconductors, such as CdS and ZnS, can play a significant role in the process due to their interesting optoelectronic and catalytic properties. However, inefficient charge-carrier dissociation and poor photochemical stability remain significant limitations to photocatalytic efficiency. Herein, dual-semiconductor nanocomposites of ZnS/CdS nanocrystal assemblies (NCAs) are developed as efficient visible light photocatalysts for H2 generation. The resultant materials, synthesized via a polymer-templated self-polymerization method, comprise a unique combination of ~5-7 nm-sized metal-sulfide nanoparticles that are interlinked to form a 3D open-pore structure with large internal surface area (up to 285 m2 g-1) and uniform pores (circa 6-7 nm). By adjusting the ratio of constituent nanoparticles, the optimized ZnS/CdS catalyst with 50 wt.% ZnS content demonstrates a remarkable stability and visible light H2-evolution activity (~29 mmol g-1 h-1 mass activity) with an apparent quantum yield (AQY) of 60% at 420 nm. Photocatalytic evaluation experiments combined with electrochemical and spectroscopic studies suggest that the superior photocatalytic performance of these materials stems from the accessible 3D open-pore structure and the efficient defect-mediated charge transfer mechanism at the ZnS/CdS nanointerfaces. Overall, this work provides a new perspective for designing functional and stable photocatalytic materials for sustainable H2 production.

Composite Materials Based on a Zr4+ MOF and Aluminosilicates for the Simultaneous Removal of Cationic and Anionic Dyes from Aqueous Media.

Environmental pollution has been a reality for many decades, with its contamination intensifying daily due to rapid urbanization and the ever-increasing world population. Dyes, and especially synthetic ones, constitute a category of pollutants that not only affect the quality of water but also exhibit high toxicity toward living organisms. This study was thoroughly planned to explore the removal of two toxic dyes, namely the methylene blue (MB) and methyl orange (MO) compounds from contaminated aqueous media. For this purpose, we designed and synthesized two new composite materials based on ammonium-functionalized Zr4+ MOF (MOR-1 or UiO-66-NH3+) and naturally occurring sorbents, such as bentonite and clinoptilolite. The composite materials displayed exceptional sorption capability toward both MB+ and MO- ions. A key finding of this study was the high efficiency of the composite materials to simultaneously remove MB+ and MO- under continuous flow conditions, also showing regeneration capability and reusability, thus providing an alternative to well-known mixed bed resins.

Highly efficient sorption and luminescence sensing of oxoanionic species by 8-connected alkyl-amino functionalized Zr4+ MOFs.

In the present study we provide the sorption properties of four 8-connected Zr4+ MOFs with the general formula H16[Zr6O16(RNH-BDC)4]·solvent (RNH-BDC2- = 2-alkyl-amine-terephthalate; R = ethyl-, ET-MOF; R = propyl-, PROP-MOF; R = isobutyl-, SBUT-MOF; R = n-butyl, BUT-MOF) towards toxic Cr(VI) and radionuclide-related ReO4- oxoanions. These MOFs represent superior sorbents for the removal of oxoanionic species, in terms of kinetics, sorption isotherms, selectivity and regeneration/reusability. The excellent sorption capability of the MOFs is due to a combination of surface and intra-framework sorption phenomena. The latter process proceeds via replacement of terminal water/hydroxyl ligands from the Zr6 clusters and subsequent binding of oxonanions to the Zr4+ centers, a fact that was proved via Rietveld PXRD analysis for the anion-loaded BUT-MOF. Importantly, BUT-MOF demonstrated an exceptional sorption capacity for Cr2O72- (505 mg g-1) and was further utilized in a sorption column in the form of MOF/calcium alginate beads, displaying remarkable removal efficiency towards industrial (chrome-plating) wastewater. Furthermore, the luminescence Cr(VI) sensing properties of BUT-MOF were explored in detail, presenting high sensitivity (detection limits as low as 9 ppb) and selectivity for these species against various competitive anions.

Zr4+-terephthalate MOFs with 6-connected structures, highly efficient As(III/V) sorption and superhydrophobic properties.

The use of terephthalate ligands with CnH2n+1NH-chains (n ≥ 6) led to the isolation of the first examples of Zr4+-terephthalate MOFs with 6-connected frameworks. The material with hexyl-amino functional groups has been proved to be an exceptional sorbent for the removal of As(III/V) toxic species from aqueous media, whereas MOFs with heptyl to dodecyl-amino moieties are superhydrophobic with promising oil-water separation properties.

Robust Al3+ MOF with Selective As(V) Sorption and Efficient Luminescence Sensing Properties toward Cr(VI).

Herein, we report the synthesis and characterization of a new robust Al3+ metal-organic framework MOF, [Al(OH)(PATP)]·solvent (Al-MOF-1, with PATP2- = 2-((pyridin-2-ylmethyl)amino)terephthalate). Al-MOF-1 exhibits excellent stability from highly acidic (pH = 2) to basic (pH = 12) aqueous solutions or in the presence of oxoanionic species [As(V) and Cr(VI)]. On the contrary, the related MIL-53(Al) MOF (Al(OH) (BDC), with BDC2- = terephthalate) shows a partial structure collapse under these conditions, signifying the superior chemical robustness of Al-MOF-1. Al-MOF-1 was proved to be an effective sorbent toward As(V) with efficient sorption capacity (71.9 ± 3.8 mg As/g), rapid sorption kinetics (equilibrium time ≤1 min), and high selectivity in the presence of various competing anions. Furthermore, Al-MOF-1 revealed high sorption capacities for Cr(VI) species in both neutral (124.5 ± 8.6 mg Cr/g) and acidic (63 ± 2 mg Cr/g) aqueous media, combining fast kinetics and relatively good selectivity. The limited porosity (BET = 38 m2/g) and small pores (2-3 Å) of the material indicate that the sorption process occurs exclusively on the external surface of Al-MOF-1 particles. The driving force for the capture of oxoanions by Al-MOF-1 is the strong electrostatic interactions between the oxoanionic species and the positively charged surface of MOF particles. Aiming at a practical wastewater treatment, we have also immobilized Al-MOF-1 on a cotton substrate, coated with polydopamine. The fabric sorbent exhibited highly effective removal of the toxic oxoanionic species from aqueous media under either batch or dynamic (continuous flow) conditions. In addition, Al-MOF-1 was found to be a promising luminescence sensor for detecting trace amounts of Cr(VI) in real water samples, with Cr(VI) being successfully detected at concentrations well below the acceptable limits (<50 ppb). Moreover, Al-MOF-1 was demonstrated to be a sufficient water sensor in organic solvents (LOD ≤0.25% v/v). All the above indicate that Al-MOF-1 represents a multifunctional material with a multitude of potential applications, such as environmental remediation, industrial wastewater treatment, chemical analysis, and water determination in biofuels.

The first amino acid bound manganese-calcium clusters: a {[MnCa]2} methylalanine complex, and a [MnCa] trigonal prism.

An amino acid containing octanuclear heterometallic {[MnCa]2} cluster has been synthesized, alongside a structurally-related trigonal prismatic [MnCa]2+ cage.